MMA7330LR1 vs MMA7360LR1 Perbandingan
Perbandingan bersamaan detil MMA7330LR1 dari NXP Semiconductors dan MMA7360LR1 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MMA7330LR1 | MMA7360LR1 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | Obsolete | Obsolete |
| Tipe Pengukur | Accelerometer, 3-axis | 3-Axis Capacitive MEMS Accelerometer |
| Tipe Output | Analog voltage (ratiometric) | Analog, ratiometric (X, Y, Z) |
| Axes Measured | X, Y, Z | — |
| Acceleration Range | ±4g (g-Select low), ±12g (g-Select high) | ±1.5g, ±6g (selectable via g-Select pin) |
| Sensitivity (±4g mode) | 800 mV/g (typical at Vdd=3.3 V) | — |
| Sensitivity (±12g mode) | 200 mV/g (typical at Vdd=3.3 V) | — |
| Bandwidth (X, Y) | 400 Hz | — |
| Bandwidth (Z) | 300 Hz | — |
| Supply Voltage (Vdd) | 2.2 V to 3.5 V | — |
| Supply Voltage (VddIO) | 1.71 V to 3.5 V | — |
| Arus Pemuat | 400 µA typical | — |
| Tetesan Bising | 1.5 mg/√Hz typical | — |
| Suhu Kerja | -40 °C to +85 °C | -40C to +85C |
| Self-Test | Yes (active high) | — |
| Zero-g Offset (factory trim) | Pre-trimmed, no external components required | — |
| Paket | 14-LGA (3 mm x 5 mm x 1 mm) | 14-LGA (3 mm x 5 mm x 1 mm) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Shock Survival | 10,000 g (per NXP test methodology) | — |
| Filter | 1-pole low-pass on-chip | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant (Lead Free) |
| Sensitivity (±1.5g mode, Vdd=3.3V) | — | 800 mV/g |
| Sensitivity (±6g mode, Vdd=3.3V) | — | 200 mV/g |
| Bandwidth (X, Y axes) | — | 400 Hz |
| Bandwidth (Z axis) | — | 300 Hz |
| Tegangan Pemuat | — | 2.2 V to 3.6 V |
| Supply Current (typical) | — | 400 uA |
| Self-Test Current | — | 1.5 mA (active) |
| 0g-Detect Output | — | Yes (linear freefall interrupt) |
| g-Select Input | — | Yes (logic high = ±6g, logic low = ±1.5g) |