MMA7330LR1 vs MMA7360LR1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MMA7330LR1 disebabkan oleh NXP Semiconductors dan MMA7360LR1 disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | MMA7330LR1 | MMA7360LR1 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | Obsolete | Obsolete |
| Jenis Sensus | Accelerometer, 3-axis | 3-Axis Capacitive MEMS Accelerometer |
| Jenis Output | Analog voltage (ratiometric) | Analog, ratiometric (X, Y, Z) |
| Axes Measured | X, Y, Z | — |
| Acceleration Range | ±4g (g-Select low), ±12g (g-Select high) | ±1.5g, ±6g (selectable via g-Select pin) |
| Sensitivity (±4g mode) | 800 mV/g (typical at Vdd=3.3 V) | — |
| Sensitivity (±12g mode) | 200 mV/g (typical at Vdd=3.3 V) | — |
| Bandwidth (X, Y) | 400 Hz | — |
| Bandwidth (Z) | 300 Hz | — |
| Supply Voltage (Vdd) | 2.2 V to 3.5 V | — |
| Supply Voltage (VddIO) | 1.71 V to 3.5 V | — |
| Arus Pemberi Arus | 400 µA typical | — |
| Jisim Bising | 1.5 mg/√Hz typical | — |
| Suhu Operasi | -40 °C to +85 °C | -40C to +85C |
| Self-Test | Yes (active high) | — |
| Zero-g Offset (factory trim) | Pre-trimmed, no external components required | — |
| Kemasan | 14-LGA (3 mm x 5 mm x 1 mm) | 14-LGA (3 mm x 5 mm x 1 mm) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Shock Survival | 10,000 g (per NXP test methodology) | — |
| Filter | 1-pole low-pass on-chip | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant (Lead Free) |
| Sensitivity (±1.5g mode, Vdd=3.3V) | — | 800 mV/g |
| Sensitivity (±6g mode, Vdd=3.3V) | — | 200 mV/g |
| Bandwidth (X, Y axes) | — | 400 Hz |
| Bandwidth (Z axis) | — | 300 Hz |
| Tegangan Pemberi Arus | — | 2.2 V to 3.6 V |
| Supply Current (typical) | — | 400 uA |
| Self-Test Current | — | 1.5 mA (active) |
| 0g-Detect Output | — | Yes (linear freefall interrupt) |
| g-Select Input | — | Yes (logic high = ±6g, logic low = ±1.5g) |