MMA7330LR1 vs MMA7360LR1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MMA7330LR1 sa pamamagitan ng NXP Semiconductors at MMA7360LR1 sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Pagsanggunian na paghahambing
| Parametro | MMA7330LR1 | MMA7360LR1 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Motion Sensors | Motion Sensors |
| Katayuan ng Lifecycle | Obsolete | Obsolete |
| Type ng Sensor | Accelerometer, 3-axis | 3-Axis Capacitive MEMS Accelerometer |
| Type ng Output | Analog voltage (ratiometric) | Analog, ratiometric (X, Y, Z) |
| Axes Measured | X, Y, Z | — |
| Acceleration Range | ±4g (g-Select low), ±12g (g-Select high) | ±1.5g, ±6g (selectable via g-Select pin) |
| Sensitivity (±4g mode) | 800 mV/g (typical at Vdd=3.3 V) | — |
| Sensitivity (±12g mode) | 200 mV/g (typical at Vdd=3.3 V) | — |
| Bandwidth (X, Y) | 400 Hz | — |
| Bandwidth (Z) | 300 Hz | — |
| Supply Voltage (Vdd) | 2.2 V to 3.5 V | — |
| Supply Voltage (VddIO) | 1.71 V to 3.5 V | — |
| Kuru-kuryente ng Pagbibigay | 400 µA typical | — |
| Density ng Noise | 1.5 mg/√Hz typical | — |
| Temperature na Operasyon | -40 °C to +85 °C | -40C to +85C |
| Self-Test | Yes (active high) | — |
| Zero-g Offset (factory trim) | Pre-trimmed, no external components required | — |
| Packhaging | 14-LGA (3 mm x 5 mm x 1 mm) | 14-LGA (3 mm x 5 mm x 1 mm) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Shock Survival | 10,000 g (per NXP test methodology) | — |
| Filter | 1-pole low-pass on-chip | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | Compliant (Lead Free) |
| Sensitivity (±1.5g mode, Vdd=3.3V) | — | 800 mV/g |
| Sensitivity (±6g mode, Vdd=3.3V) | — | 200 mV/g |
| Bandwidth (X, Y axes) | — | 400 Hz |
| Bandwidth (Z axis) | — | 300 Hz |
| Volte ng Pagbibigay | — | 2.2 V to 3.6 V |
| Supply Current (typical) | — | 400 uA |
| Self-Test Current | — | 1.5 mA (active) |
| 0g-Detect Output | — | Yes (linear freefall interrupt) |
| g-Select Input | — | Yes (logic high = ±6g, logic low = ±1.5g) |