MPXA6115AC6U vs MPXAZ6115A7U Perbandingan
Perbandingan bersamaan detil MPXA6115AC6U dari NXP Semiconductors dan MPXAZ6115A7U dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MPXA6115AC6U | MPXAZ6115A7U |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Maximum Over Pressure | [DATA_NEEDED: maximum over pressure rating] | — |
| Rentang Tegangan Output | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V |
| Sensitivity | 45.9 mV/kPa (typical) | [DATA_NEEDED: typical sensitivity mV/kPa] |
| Tegangan Pemuat | 4.75 V to 5.25 V | 5.0 V typical |
| Arus Pemuat | [DATA_NEEDED: supply current typical] | — |
| Accuracy | ±1.5% (0°C to +85°C) | ±1.5% (0C to 85C, after NXP factory calibration) |
| Suhu Kerja | -40°C to +125°C | -40C to +125C |
| Response Time | 1.0 ms (typical) | — |
| Port Style | Single axial top port, 0.13" (3.17 mm) tube | Top axial tube, 0.13" (3.17 mm) diameter |
| Paket | 8-SMD, Gull Wing (Case 1320-02, SOP-8) | — |
| Tipe Mounting | Surface Mount | Through-Hole |
| Tipe Output | Analog, ratiometric | Analog Voltage |
| Signal Conditioning | On-chip bipolar op-amp, temperature compensated | On-chip bipolar op-amp + thin-film resistor network |
| Element Type | Piezoresistive MEMS silicon | — |
| Status RoHS | Compliant | Compliant |
| Operating Pressure Min | — | 15 kPa |
| Operating Pressure Max | — | 115 kPa |
| Paket / Case | — | 8-DIP Module (0.560 inch, 14.22 mm) |
| Media Compatibility | — | Non-corrosive dry gases (media resistant) |
| Temperature Compensation | — | On-chip, factory calibrated |