MPXA6115AC6U vs MPXAZ6115A7U Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MPXA6115AC6U disebabkan oleh NXP Semiconductors dan MPXAZ6115A7U disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | MPXA6115AC6U | MPXAZ6115A7U |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Maximum Over Pressure | [DATA_NEEDED: maximum over pressure rating] | — |
| Gambaran Tegangan Output | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V |
| Sensitivity | 45.9 mV/kPa (typical) | [DATA_NEEDED: typical sensitivity mV/kPa] |
| Tegangan Pemberi Arus | 4.75 V to 5.25 V | 5.0 V typical |
| Arus Pemberi Arus | [DATA_NEEDED: supply current typical] | — |
| Accuracy | ±1.5% (0°C to +85°C) | ±1.5% (0C to 85C, after NXP factory calibration) |
| Suhu Operasi | -40°C to +125°C | -40C to +125C |
| Response Time | 1.0 ms (typical) | — |
| Port Style | Single axial top port, 0.13" (3.17 mm) tube | Top axial tube, 0.13" (3.17 mm) diameter |
| Kemasan | 8-SMD, Gull Wing (Case 1320-02, SOP-8) | — |
| Jenis Pemasangan | Surface Mount | Through-Hole |
| Jenis Output | Analog, ratiometric | Analog Voltage |
| Signal Conditioning | On-chip bipolar op-amp, temperature compensated | On-chip bipolar op-amp + thin-film resistor network |
| Element Type | Piezoresistive MEMS silicon | — |
| Status RoHS | Compliant | Compliant |
| Operating Pressure Min | — | 15 kPa |
| Operating Pressure Max | — | 115 kPa |
| Kemasan / Case | — | 8-DIP Module (0.560 inch, 14.22 mm) |
| Media Compatibility | — | Non-corrosive dry gases (media resistant) |
| Temperature Compensation | — | On-chip, factory calibrated |