MPXAZ6115A7U vs MPXA6115AC6U Perbandingan
Perbandingan bersamaan detil MPXAZ6115A7U dari NXP Semiconductors dan MPXA6115AC6U dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MPXAZ6115A7U | MPXA6115AC6U |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| Tipe Output | Analog Voltage | Analog, ratiometric |
| Rentang Tegangan Output | 0.2 V to 4.7 V | 0.2 V to 4.7 V (at 5 V supply) |
| Tegangan Pemuat | 5.0 V typical | 4.75 V to 5.25 V |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | 45.9 mV/kPa (typical) |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | ±1.5% (0°C to +85°C) |
| Suhu Kerja | -40C to +125C | -40°C to +125°C |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | Single axial top port, 0.13" (3.17 mm) tube |
| Paket / Case | 8-DIP Module (0.560 inch, 14.22 mm) | — |
| Tipe Mounting | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | On-chip bipolar op-amp, temperature compensated |
| Temperature Compensation | On-chip, factory calibrated | — |
| Status RoHS | Compliant | Compliant |
| Maximum Over Pressure | — | [DATA_NEEDED: maximum over pressure rating] |
| Arus Pemuat | — | [DATA_NEEDED: supply current typical] |
| Response Time | — | 1.0 ms (typical) |
| Paket | — | 8-SMD, Gull Wing (Case 1320-02, SOP-8) |
| Element Type | — | Piezoresistive MEMS silicon |