MPXAZ6115A7U vs MPXA6115AC6U Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MPXAZ6115A7U disebabkan oleh NXP Semiconductors dan MPXA6115AC6U disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | MPXAZ6115A7U | MPXA6115AC6U |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| Jenis Output | Analog Voltage | Analog, ratiometric |
| Gambaran Tegangan Output | 0.2 V to 4.7 V | 0.2 V to 4.7 V (at 5 V supply) |
| Tegangan Pemberi Arus | 5.0 V typical | 4.75 V to 5.25 V |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | 45.9 mV/kPa (typical) |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | ±1.5% (0°C to +85°C) |
| Suhu Operasi | -40C to +125C | -40°C to +125°C |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | Single axial top port, 0.13" (3.17 mm) tube |
| Kemasan / Case | 8-DIP Module (0.560 inch, 14.22 mm) | — |
| Jenis Pemasangan | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | On-chip bipolar op-amp, temperature compensated |
| Temperature Compensation | On-chip, factory calibrated | — |
| Status RoHS | Compliant | Compliant |
| Maximum Over Pressure | — | [DATA_NEEDED: maximum over pressure rating] |
| Arus Pemberi Arus | — | [DATA_NEEDED: supply current typical] |
| Response Time | — | 1.0 ms (typical) |
| Kemasan | — | 8-SMD, Gull Wing (Case 1320-02, SOP-8) |
| Element Type | — | Piezoresistive MEMS silicon |