MPXV5010GC7U vs MPVZ5010G7U Perbandingan
Perbandingan bersamaan detil MPXV5010GC7U dari NXP Semiconductors dan MPVZ5010G7U dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP
MPVZ5010G7U ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MPXV5010GC7U | MPVZ5010G7U |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Differential / Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating in kPa] | — |
| Tegangan Pemuat | 4.75 V to 5.25 V (typ. 5.0 V) | — |
| Full-Scale Output (typ. @10 kPa) | 4.5 V | — |
| Zero-Pressure Offset | 0.2 V to 0.85 V | — |
| Supply Current (typ.) | [DATA_NEEDED: supply current in mA] | — |
| Rentang Suhu Kerja | 0 °C to +85 °C | 0 °C to +85 °C |
| Storage Temperature Range | -30 °C to +100 °C | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] |
| Tipe Output | Analog (ratiometric to VCC) | Analog, ratiometric to Vcc |
| Output Impedance | < 50 ohm | — |
| Accuracy (typ.) | ±5 % of V_FSS (0-85 °C) | — |
| Response Time | [DATA_NEEDED: response time in ms] | [DATA_NEEDED: response time ms] |
| Paket / Case | SOP-8 (Case 1737), Surface Mount | — |
| Port Configuration | Dual axial horizontal ports (gauge) | — |
| Media Compatibility | Non-corrosive, non-ionic media (dry air, dry gases) | — |
| Tipe Mounting | Surface Mount | Through-Hole (DIP module with vent tube) |
| Status RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V (5 V typical) |
| Arus Pemuat | — | 10 mA (maximum) |
| Analog Output Range | — | 0.2 V to 4.7 V |
| Accuracy | — | ±1.5 %FS (0 °C to 85 °C) |
| Compensated Temperature Range | — | -10 °C to +60 °C |
| Paket | — | 8-DIP Module (Case 1368-01, through-hole) |
| Sensor Technology | — | Piezoresistive silicon micromachined |
| Signal Conditioning | — | On-chip, temperature compensated, calibrated |
| Level MSL | — | [DATA_NEEDED: MSL rating] |
| Body Height | — | 5.46 mm |