MX30UF4G18AB vs MX30UF4G16AB Perbandingan
Perbandingan bersamaan detil MX30UF4G18AB dari Macronix dan MX30UF4G16AB dari Macronix. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MX30UF4G18AB | MX30UF4G16AB |
|---|---|---|
| Merek | Macronix | Macronix |
| Kategori | Memory ICs | Memory ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Tipe Memori | Non-volatile NAND Flash (SLC) | Non-volatile NAND Flash (SLC) |
| Density | 4 Gbit (512 MiB x8) | 4 Gbit (512 MB) |
| Cell Technology | Single-Level Cell (SLC), 1 bit/cell | — |
| Supply Voltage (VCC) | 1.7 V to 1.95 V (1.8 V typ) | 1.7 V to 1.95 V (1.8 V typical) |
| Antarmuka | 8-bit parallel asynchronous | Parallel / Asynchronous NAND (ONFI 1.0) |
| Page Size | 2,112 bytes (2,048 + 64 spare) or 4,320 bytes ONFI mode | [DATA_NEEDED: page size bytes] |
| Block Size | 128 KiB (64 pages x 2 KiB) [DATA_NEEDED: exact blocks-per-die count] | [DATA_NEEDED: block size / block erase granularity] |
| Page Read Time (tR) | 25 ns (async, typical) [DATA_NEEDED: confirmed from datasheet v1.2 timing table] | — |
| Standby Current (Sleep Mode) | 50 uA max | 50 uA (maximum) |
| ONFI Compliance | ONFI 1.0 | ONFI 1.0 parameter page |
| Endurance (P/E cycles) | [DATA_NEEDED: typical endurance spec] | — |
| Data Retention | [DATA_NEEDED: typical retention spec] | [DATA_NEEDED: typical data retention years] |
| Suhu Kerja | -40 C to +85 C (industrial) | — |
| Paket | 48-pin TSOP I (12 mm x 20 mm x 1.0 mm) for -TI; 63-VFBGA (9x11) for -XKI | 63-ball VFBGA, 9 mm x 11 mm |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | 3 [DATA_NEEDED: confirm from datasheet] | — |
| Status RoHS | Compliant | Compliant |
| Lead-free | Yes | — |
| Organisasi | — | 256 M x 16 |
| Bus Width | — | x16 (also supports x8) |
| Access Time (tRC) | — | 25 ns (typical) |
| Endurance (P/E Cycles) | — | [DATA_NEEDED: typical P/E cycles] |
| Rentang Suhu Kerja | — | -40C to +85C (industrial) |
| Lead-Free | — | Yes |
| Bad Block Management | — | External (host-managed) |
| ECC Support | — | External hardware ECC required |