MX30UF4G18AB vs MX30UF4G16AB Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MX30UF4G18AB disebabkan oleh Macronix dan MX30UF4G16AB disebabkan oleh Macronix. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | MX30UF4G18AB | MX30UF4G16AB |
|---|---|---|
| Merek | Macronix | Macronix |
| Kategori | Memory ICs | Memory ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Jenis Ingatan | Non-volatile NAND Flash (SLC) | Non-volatile NAND Flash (SLC) |
| Density | 4 Gbit (512 MiB x8) | 4 Gbit (512 MB) |
| Cell Technology | Single-Level Cell (SLC), 1 bit/cell | — |
| Supply Voltage (VCC) | 1.7 V to 1.95 V (1.8 V typ) | 1.7 V to 1.95 V (1.8 V typical) |
| Antaramuka | 8-bit parallel asynchronous | Parallel / Asynchronous NAND (ONFI 1.0) |
| Page Size | 2,112 bytes (2,048 + 64 spare) or 4,320 bytes ONFI mode | [DATA_NEEDED: page size bytes] |
| Block Size | 128 KiB (64 pages x 2 KiB) [DATA_NEEDED: exact blocks-per-die count] | [DATA_NEEDED: block size / block erase granularity] |
| Page Read Time (tR) | 25 ns (async, typical) [DATA_NEEDED: confirmed from datasheet v1.2 timing table] | — |
| Standby Current (Sleep Mode) | 50 uA max | 50 uA (maximum) |
| ONFI Compliance | ONFI 1.0 | ONFI 1.0 parameter page |
| Endurance (P/E cycles) | [DATA_NEEDED: typical endurance spec] | — |
| Data Retention | [DATA_NEEDED: typical retention spec] | [DATA_NEEDED: typical data retention years] |
| Suhu Operasi | -40 C to +85 C (industrial) | — |
| Kemasan | 48-pin TSOP I (12 mm x 20 mm x 1.0 mm) for -TI; 63-VFBGA (9x11) for -XKI | 63-ball VFBGA, 9 mm x 11 mm |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Aras MSL | 3 [DATA_NEEDED: confirm from datasheet] | — |
| Status RoHS | Compliant | Compliant |
| Lead-free | Yes | — |
| Organisasi | — | 256 M x 16 |
| Bus Width | — | x16 (also supports x8) |
| Access Time (tRC) | — | 25 ns (typical) |
| Endurance (P/E Cycles) | — | [DATA_NEEDED: typical P/E cycles] |
| Gambaran Suhu Operasi | — | -40C to +85C (industrial) |
| Lead-Free | — | Yes |
| Bad Block Management | — | External (host-managed) |
| ECC Support | — | External hardware ECC required |