PN7160A1HN vs PN7161B1HN Perbandingan

Perbandingan bersamaan detil PN7160A1HN dari NXP Semiconductors dan PN7161B1HN dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

NXP Semiconductors
PN7160A1HN PN7160A1HN - NFC Plug & Play Controller, NCI 2.0 | NXP

PN7160A1HN - NFC Plug & Play Controller, NCI 2.0 | NXP

PN7160A1HN ✓ Aktif
NXP Semiconductors
PN7161B1HN PN7161B1HN - NFC Controller, 13.56MHz, NCI, VFQFN-40 | NXP

PN7161B1HN - NFC Controller, 13.56MHz, NCI, VFQFN-40 | NXP

PN7161B1HN ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum PN7160A1HN PN7161B1HN
Merek NXP Semiconductors NXP Semiconductors
Kategori RF Modules RF Transceivers
Status Lingkungan Hidup Aktif Aktif
Product Type NFC Plug and Play Controller —
Operating Frequency 13.56 MHz 13.56 MHz
Supported Protocols FeliCa, ISO 14443, ISO 15693, MIFARE, NFC FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMV L1
Host Interface I2C (default, hardware) / SPI (EEPROM-configurable) SPI (NCI - NFC Controller Interface)
NCI Version NCI 2.0 (pre-loaded firmware) —
Digital Supply Voltage 1.65 V to 1.95 V (VDD) —
Analog/RF Supply Voltage 3.0 V to 3.6 V (VBAT, VBAT_PA) —
I/O Supply Voltage 1.65 V to 1.95 V (VDDIO) —
I2C Address 0x28 (7-bit) —
RF Output Power [DATA_NEEDED: TX output power dBm] —
Antenna Pins TX1, TX2 (differential); RX1, RX2 —
Integrated MCU Core ARM Cortex-M0 (ROM-resident NCI firmware) —
Operating Modes Reader/Writer, Card Emulation (P2P), Tag Detection —
Modes of Operation Active, Standby, Hard Power Down, Low-Power Polling —
Paket HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad 40-VFQFN Exposed Pad
Tipe Mounting Surface Mount Surface Mount
Peak Reflow Temperature 260 C (per JEDEC J-STD-020) 260 C
Moisture Sensitivity Level MSL 3 —
Status RoHS Compliant Compliant
Suhu Kerja -30 C to +85 C —
Manufacturer — NXP Semiconductors
Part Number — PN7161B1HN
Fungsi — NFC Controller (RFID Reader/Transponder IC)
Digital Supply Voltage (VDD) — 1.65 V to 1.95 V (typical 1.8 V)
RF/Analog Supply Voltage (VBAT) — 3.0 V to 3.6 V (typical 3.3 V)
Apple ECP Support — Yes
EMV Compliance — EMV L1 Compliant
Tingkat Sensitivitas Kekeringan (MSL) — 3

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon