PN7160A1HN vs PN7161B1HN Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci PN7160A1HN disebabkan oleh NXP Semiconductors dan PN7161B1HN disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | PN7160A1HN | PN7161B1HN |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | RF Modules | RF Transceivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | NFC Plug and Play Controller | — |
| Operating Frequency | 13.56 MHz | 13.56 MHz |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMV L1 |
| Host Interface | I2C (default, hardware) / SPI (EEPROM-configurable) | SPI (NCI - NFC Controller Interface) |
| NCI Version | NCI 2.0 (pre-loaded firmware) | — |
| Digital Supply Voltage | 1.65 V to 1.95 V (VDD) | — |
| Analog/RF Supply Voltage | 3.0 V to 3.6 V (VBAT, VBAT_PA) | — |
| I/O Supply Voltage | 1.65 V to 1.95 V (VDDIO) | — |
| I2C Address | 0x28 (7-bit) | — |
| RF Output Power | [DATA_NEEDED: TX output power dBm] | — |
| Antenna Pins | TX1, TX2 (differential); RX1, RX2 | — |
| Integrated MCU Core | ARM Cortex-M0 (ROM-resident NCI firmware) | — |
| Operating Modes | Reader/Writer, Card Emulation (P2P), Tag Detection | — |
| Modes of Operation | Active, Standby, Hard Power Down, Low-Power Polling | — |
| Kemasan | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad | 40-VFQFN Exposed Pad |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Peak Reflow Temperature | 260 C (per JEDEC J-STD-020) | 260 C |
| Moisture Sensitivity Level | MSL 3 | — |
| Status RoHS | Compliant | Compliant |
| Suhu Operasi | -30 C to +85 C | — |
| Manufacturer | — | NXP Semiconductors |
| Part Number | — | PN7161B1HN |
| Fungsi | — | NFC Controller (RFID Reader/Transponder IC) |
| Digital Supply Voltage (VDD) | — | 1.65 V to 1.95 V (typical 1.8 V) |
| RF/Analog Supply Voltage (VBAT) | — | 3.0 V to 3.6 V (typical 3.3 V) |
| Apple ECP Support | — | Yes |
| EMV Compliance | — | EMV L1 Compliant |
| Tingkat sensitiviti Air Nama (MSL) | — | 3 |