PN7160A1HN vs PN7161B1HN Karşılaştırma
Ayrıntılı yan yana karşılaştırma PN7160A1HN tarafından NXP Semiconductors ve PN7161B1HN tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | PN7160A1HN | PN7161B1HN |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | RF Modules | RF Transceivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | NFC Plug and Play Controller | — |
| Operating Frequency | 13.56 MHz | 13.56 MHz |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMV L1 |
| Host Interface | I2C (default, hardware) / SPI (EEPROM-configurable) | SPI (NCI - NFC Controller Interface) |
| NCI Version | NCI 2.0 (pre-loaded firmware) | — |
| Digital Supply Voltage | 1.65 V to 1.95 V (VDD) | — |
| Analog/RF Supply Voltage | 3.0 V to 3.6 V (VBAT, VBAT_PA) | — |
| I/O Supply Voltage | 1.65 V to 1.95 V (VDDIO) | — |
| I2C Address | 0x28 (7-bit) | — |
| RF Output Power | [DATA_NEEDED: TX output power dBm] | — |
| Antenna Pins | TX1, TX2 (differential); RX1, RX2 | — |
| Integrated MCU Core | ARM Cortex-M0 (ROM-resident NCI firmware) | — |
| Operating Modes | Reader/Writer, Card Emulation (P2P), Tag Detection | — |
| Modes of Operation | Active, Standby, Hard Power Down, Low-Power Polling | — |
| Paket | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad | 40-VFQFN Exposed Pad |
| Montaj Türü | Surface Mount | Surface Mount |
| Peak Reflow Temperature | 260 C (per JEDEC J-STD-020) | 260 C |
| Moisture Sensitivity Level | MSL 3 | — |
| RoHS Durumu | Compliant | Compliant |
| İşletim Sıcaklığı | -30 C to +85 C | — |
| Manufacturer | — | NXP Semiconductors |
| Part Number | — | PN7161B1HN |
| Fonksiyon | — | NFC Controller (RFID Reader/Transponder IC) |
| Digital Supply Voltage (VDD) | — | 1.65 V to 1.95 V (typical 1.8 V) |
| RF/Analog Supply Voltage (VBAT) | — | 3.0 V to 3.6 V (typical 3.3 V) |
| Apple ECP Support | — | Yes |
| EMV Compliance | — | EMV L1 Compliant |
| Nem Hassasiyet Seviyesi (MSL) | — | 3 |