PN7161A1HN vs PN7160A1HN Perbandingan
Perbandingan bersamaan detil PN7161A1HN dari NXP Semiconductors dan PN7160A1HN dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | PN7161A1HN | PN7160A1HN |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | RF Modules | RF Modules |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | NFC Controller with NCI interface | — |
| RF Frequency | 13.56 MHz | — |
| Supported Protocols | ISO 14443 A/B, ISO 15693, FeliCa, MIFARE Classic, MIFARE DESFire, NTAG, NFC Forum Type 1-5 | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Host Interface | NCI 1.0 over I2C | I2C (default, hardware) / SPI (EEPROM-configurable) |
| Operating Voltage (VCC) | 1.65 V to 3.6 V | — |
| Operating Voltage (VBAT variant) | 3.0 V to 5.5 V | — |
| RF Output Power | Up to 1.5 W into antenna load | [DATA_NEEDED: TX output power dBm] |
| Reader/Writer Mode | Yes | — |
| P2P / Card Emulation | Yes | — |
| Apple ECP Support | Yes (authorization required) | — |
| Integrated Firmware | Yes (loaded via I2C) | — |
| Cryptographic Acceleration | AES-128, Crypto1 | — |
| LPCD Current | ~100 uA | — |
| Paket | 40-VFQFN Exposed Pad (HVQFN, 6x6 mm) | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| Tipe Mounting | Surface Mount | Surface Mount |
| Suhu Kerja | -40 C to +85 C | -30 C to +85 C |
| Level MSL | 3 | — |
| Status RoHS | Compliant | Compliant |
| Product Type | — | NFC Plug and Play Controller |
| Operating Frequency | — | 13.56 MHz |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Peak Reflow Temperature | — | 260 C (per JEDEC J-STD-020) |
| Moisture Sensitivity Level | — | MSL 3 |