PN7161A1HN vs PN7160A1HN Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng PN7161A1HN sa pamamagitan ng NXP Semiconductors at PN7160A1HN sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
PN7161A1HN - NFC Plug & Play Controller with Apple ECP | NXP
PN7161A1HN ✓ Nakahanda
Pagsanggunian na paghahambing
| Parametro | PN7161A1HN | PN7160A1HN |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | RF Modules | RF Modules |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Fungsi | NFC Controller with NCI interface | — |
| RF Frequency | 13.56 MHz | — |
| Supported Protocols | ISO 14443 A/B, ISO 15693, FeliCa, MIFARE Classic, MIFARE DESFire, NTAG, NFC Forum Type 1-5 | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Host Interface | NCI 1.0 over I2C | I2C (default, hardware) / SPI (EEPROM-configurable) |
| Operating Voltage (VCC) | 1.65 V to 3.6 V | — |
| Operating Voltage (VBAT variant) | 3.0 V to 5.5 V | — |
| RF Output Power | Up to 1.5 W into antenna load | [DATA_NEEDED: TX output power dBm] |
| Reader/Writer Mode | Yes | — |
| P2P / Card Emulation | Yes | — |
| Apple ECP Support | Yes (authorization required) | — |
| Integrated Firmware | Yes (loaded via I2C) | — |
| Cryptographic Acceleration | AES-128, Crypto1 | — |
| LPCD Current | ~100 uA | — |
| Packhaging | 40-VFQFN Exposed Pad (HVQFN, 6x6 mm) | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Temperature na Operasyon | -40 C to +85 C | -30 C to +85 C |
| Level ng MSL | 3 | — |
| Tindminan RoHS | Compliant | Compliant |
| Product Type | — | NFC Plug and Play Controller |
| Operating Frequency | — | 13.56 MHz |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Peak Reflow Temperature | — | 260 C (per JEDEC J-STD-020) |
| Moisture Sensitivity Level | — | MSL 3 |