PN7161A1HN vs PN7160A1HN Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci PN7161A1HN disebabkan oleh NXP Semiconductors dan PN7160A1HN disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | PN7161A1HN | PN7160A1HN |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | RF Modules | RF Modules |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | NFC Controller with NCI interface | — |
| RF Frequency | 13.56 MHz | — |
| Supported Protocols | ISO 14443 A/B, ISO 15693, FeliCa, MIFARE Classic, MIFARE DESFire, NTAG, NFC Forum Type 1-5 | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Host Interface | NCI 1.0 over I2C | I2C (default, hardware) / SPI (EEPROM-configurable) |
| Operating Voltage (VCC) | 1.65 V to 3.6 V | — |
| Operating Voltage (VBAT variant) | 3.0 V to 5.5 V | — |
| RF Output Power | Up to 1.5 W into antenna load | [DATA_NEEDED: TX output power dBm] |
| Reader/Writer Mode | Yes | — |
| P2P / Card Emulation | Yes | — |
| Apple ECP Support | Yes (authorization required) | — |
| Integrated Firmware | Yes (loaded via I2C) | — |
| Cryptographic Acceleration | AES-128, Crypto1 | — |
| LPCD Current | ~100 uA | — |
| Kemasan | 40-VFQFN Exposed Pad (HVQFN, 6x6 mm) | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Suhu Operasi | -40 C to +85 C | -30 C to +85 C |
| Aras MSL | 3 | — |
| Status RoHS | Compliant | Compliant |
| Product Type | — | NFC Plug and Play Controller |
| Operating Frequency | — | 13.56 MHz |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Peak Reflow Temperature | — | 260 C (per JEDEC J-STD-020) |
| Moisture Sensitivity Level | — | MSL 3 |