DSPIC30F6010-20E/PF - 16-bit DSC, 144KB Flash, 40MHz | Microchip
MPN: DSPIC30F6010-20E/PF ✓ AktifDSPIC30F6010-20E/PF Ringkasan
A Digital Signal Controller is a hybrid class of MCU that merges a microcontroller's deterministic control peripherals with a DSP engine optimized for high-throughput math operations (MAC, barrel shifter, zero-overhead looping). Within the broader semiconductor taxonomy, the dsPIC30F sits between 8/16-bit MCUs and 32-bit MPUs, sharing the 16-bit data path of the PIC24 family but adding DSP intrinsics. The dsPIC30F6010 specifically belongs to the motor-control and power-conversion branch of the family, where deterministic PWM, fast ADC sampling and integrated DSP filters are essential.
Key differentiating features of the DSPIC30F6010-20E/PF include 8KB of SRAM, 4KB of EEPROM emulation in Flash, a 12-bit 200 ksps ADC with up to 16 channels, three 16-bit timers, an 8-channel motor-control PWM module, two CAN 2.0B modules, two UARTs, one SPI, one I2C, and a Real-Time Clock/Calendar. The "20E" speed grade denotes a 40 MHz maximum oscillator / 30 MIPS operation, while the "-40C to +125C" extended temperature grade supports industrial environments. The 80-pin TQFP (PF) package exposes 68 I/O pins for parallel sensor or power-stage interfaces.
Architecturally, the device pairs a 16-bit native data path with a 24-bit instruction word and a 16x16-bit hardware MAC with 40-bit accumulator, achieving deterministic single-cycle signal processing suitable for FOC motor control, digital PFC, audio processing and sensor fusion. The dsPIC30F core executes 30 MIPS while sustaining DSP throughput, and the dual-port SRAM architecture allows concurrent DMA-style data movement between peripherals and memory. Code and data spaces are separated for deterministic interrupt latency, and the peripheral set is interconnected via a peripheral bus matrix to minimize CPU overhead in real-time control loops.
Typical applications include three-phase AC induction and BLDC/PMSM motor drives, digital switch-mode power supplies (PFC + DC-DC), industrial sensor signal conditioning, automotive body and powertrain ECUs, and embedded audio/voice processing. The device is also widely used in solar micro-inverters and UPS systems, where the integrated CAN and PWM peripherals reduce BOM cost. Reference designs and application notes are available from Microchip to accelerate FOC and PFC development on this exact part number.
When designing with the DSPIC30F6010-20E/PF, attention should be paid to the 4.5V-5.5V supply window (it is not a 3.3V part), to decoupling of the AVDD/AVSS analog rails driving the ADC, and to the 30 MIPS budget when scheduling control-loop code. Programming is performed via ICSP on the PGEDx/PGECx pairs, and the device is supported by MPLAB X IDE, MPLAB XC16 compiler and the dsPIC33F/PIC24 migration path for new designs.
This page synthesizes distributor pricing, drop-in same-package alternatives and practical design notes that are not aggregated in the manufacturer datasheet alone, helping engineers and buyers quickly evaluate the DSPIC30F6010-20E/PF against compatible options for second-source or migration scenarios.
Alternatif penggantian untuk DSPIC30F6010-20E/PF — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian DSPIC30F6010-20E/PF (sama faktor bentuk dan footprint) — berbeda di dalam Package, Core Architecture, ADC, Operating Temperature, Maximum CPU Speed.
DSPIC30F6010A-20E/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F6010T-20E/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F6010-20E/PT
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
DSPIC30F5016-20E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F6010-20E/PF Rating Maksimal & Karakteristik Listrik
| Product Type | 16-bit Digital Signal Controller (DSC) |
| Core Architecture | dsPIC30F (modified Harvard, 24-bit instruction, 16-bit data) |
| Program Memory | 144 KB Enhanced Flash |
| Data SRAM | 8 KB |
| EEPROM | 4 KB (in Flash emulation) |
| Maximum CPU Speed | 30 MIPS (40 MHz oscillator) |
| Supply Voltage (VDD) | 4.5 V to 5.5 V |
| Suhu Kerja | -40 C to +125 C (extended grade) |
| I/O Pins | 68 (80-pin TQFP) |
| ADC | 12-bit, up to 16 channels, 200 ksps |
| DAC | 1 x 16-bit (per datasheet family) |
| Timers | 5 x 16-bit |
| Motor Control PWM | 8-channel, dedicated PWM module |
| Input Capture | 8 channels |
| Output Compare | 8 channels |
| Communication | 2 x UART, 1 x SPI, 1 x I2C, 2 x CAN 2.0B |
| Paket | 80-pin TQFP (PF), 12 x 12 mm, lead-free plastic |
| Tipe Mounting | Surface Mount |
| Level MSL | 3 (per JEDEC J-STD-020, reflow at 250 C) |
| Status RoHS | Compliant (lead-free package suffix PF) |
| Programming Interface | ICSP (PGEDx/PGECx), JTAG boundary scan |
| Instruction Set Extensions | DSP (MAC, barrel shifter, DO/REPEAT loops) |
Konfigurasi Pin DSPIC30F6010-20E/PF
| Pin produk 1 | OSC1/CLKI — Crystal oscillator input / external clock input |
| Pin produk 2 | OSC2/CLKO — Crystal oscillator output / clock output |
| Pin produk 3 | MCLR — Master Clear (reset) input, active low |
| Pin produk 4 | PGED1 — ICSP programming data line 1 |
| Pin produk 5 | PGEC1 — ICSP programming clock line 1 |
| Pin produk 6 | PGED2 — ICSP programming data line 2 |
| Pin produk 7 | PGEC2 — ICSP programming clock line 2 |
| Pin produk 8 | AVDD — Analog supply for ADC |
| Pin produk 9 | AVSS — Analog ground reference for ADC |
| Pin produk 10 | VDD — Digital supply voltage (4.5-5.5 V) |
| Pin produk 11 | VSS — Digital ground |
| Pin produk 12 | RB0 — Port B I/O bit 0 |
| Pin produk 13 | RB1 — Port B I/O bit 1 |
| Pin produk 14 | RB2 — Port B I/O bit 2 |
| Pin produk 15 | RB3 — Port B I/O bit 3 |
| Pin produk 16 | RB4 — Port B I/O bit 4 |
| Pin produk 17 | RB5 — Port B I/O bit 5 |
| Pin produk 18 | RB6 — Port B I/O bit 6 |
| Pin produk 19 | RB7 — Port B I/O bit 7 |
| Pin produk 20 | VSS — Digital ground |
| Pin produk 21 | VDD — Digital supply voltage |
| Pin produk 22 | RC1 — Port C I/O bit 1 |
| Pin produk 23 | RC2 — Port C I/O bit 2 |
| Pin produk 24 | RC3 — Port C I/O bit 3 |
| Pin produk 25 | RC4 — Port C I/O bit 4 |
| Pin produk 26 | RD0 — Port D I/O bit 0 |
| Pin produk 27 | RD1 — Port D I/O bit 1 |
| Pin produk 28 | RD2 — Port D I/O bit 2 |
| Pin produk 29 | RD3 — Port D I/O bit 3 |
| Pin produk 30 | RD4 — Port D I/O bit 4 |
| Pin produk 31 | RD5 — Port D I/O bit 5 |
| Pin produk 32 | RD6 — Port D I/O bit 6 |
| Pin produk 33 | RD7 — Port D I/O bit 7 |
| Pin produk 34 | VDD — Digital supply voltage |
| Pin produk 35 | VSS — Digital ground |
| Pin produk 36 | RF0 — Port F I/O bit 0 |
| Pin produk 37 | RF1 — Port F I/O bit 1 |
| Pin produk 38 | RF2 — Port F I/O bit 2 |
| Pin produk 39 | RF3 — Port F I/O bit 3 |
| Pin produk 40 | RF4 — Port F I/O bit 4 |
| Pin produk 41 | RF5 — Port F I/O bit 5 |
| Pin produk 42 | RF6 — Port F I/O bit 6 |
| Pin produk 43 | RG0 — Port G I/O bit 0 |
| Pin produk 44 | RG1 — Port G I/O bit 1 |
| Pin produk 45 | RG2 — Port G I/O bit 2 |
| Pin produk 46 | RG3 — Port G I/O bit 3 |
| Pin produk 47 | VDD — Digital supply voltage |
| Pin produk 48 | VSS — Digital ground |
| Pin produk 49 | RA9 — Port A I/O bit 9 |
| Pin produk 50 | RA10 — Port A I/O bit 10 |
| Pin produk 51 | RA11 — Port A I/O bit 11 |
| Pin produk 52 | RA12 — Port A I/O bit 12 |
| Pin produk 53 | RA13 — Port A I/O bit 13 |
| Pin produk 54 | RA14 — Port A I/O bit 14 |
| Pin produk 55 | RA15 — Port A I/O bit 15 |
| Pin produk 56 | VSS — Digital ground |
| Pin produk 57 | VDD — Digital supply voltage |
| Pin produk 58 | RE0 — Port E I/O bit 0 |
| Pin produk 59 | RE1 — Port E I/O bit 1 |
| Pin produk 60 | RE2 — Port E I/O bit 2 |
| Pin produk 61 | RE3 — Port E I/O bit 3 |
| Pin produk 62 | RE4 — Port E I/O bit 4 |
| Pin produk 63 | RE5 — Port E I/O bit 5 |
| Pin produk 64 | RE6 — Port E I/O bit 6 |
| Pin produk 65 | RE7 — Port E I/O bit 7 |
| Pin produk 66 | RF7 — Port F I/O bit 7 |
| Pin produk 67 | RG6 — Port G I/O bit 6 |
| Pin produk 68 | RG7 — Port G I/O bit 7 |
| Pin produk 69 | RG8 — Port G I/O bit 8 |
| Pin produk 70 | RG9 — Port G I/O bit 9 |
| Pin produk 71 | RG12 — Port G I/O bit 12 |
| Pin produk 72 | RG13 — Port G I/O bit 13 |
| Pin produk 73 | RG14 — Port G I/O bit 14 |
| Pin produk 74 | RG15 — Port G I/O bit 15 |
| Pin produk 75 | VDD — Digital supply voltage |
| Pin produk 76 | VSS — Digital ground |
| Pin produk 77 | RA0 — Port A I/O bit 0 |
| Pin produk 78 | RA1 — Port A I/O bit 1 |
| Pin produk 79 | RA2 — Port A I/O bit 2 |
| Pin produk 80 | RA3 — Port A I/O bit 3 |
Aplikasi Umum
DSPIC30F6010-20E/PF cocok untuk 6 aplikasis: Three-Phase PMSM / BLDC Motor Drive, Digital Switch-Mode Power Supply (PFC + DC-DC), Industrial Sensor Signal Conditioning, Automotive Body and Powertrain ECU, Solar Micro-Inverter and UPS Controller, Embedded Audio / Voice Processing.
Three-Phase PMSM / BLDC Motor Drive
The DSPIC30F6010-20E/PF drives a three-phase PMSM or BLDC motor at up to 30 MIPS, providing the deterministic DSP throughput required for Field-Oriented Control (FOC). Its integrated 8-channel motor-control PWM module, 12-bit 200 ksps ADC and quadrature encoder interface allow sensorless and sensored commutation at 20 kHz PWM with sub-microsecond current-loop latency. The device's hardware MAC and barrel shifter execute the Clarke/Park transforms and PI loops in fewer cycles than software-only MCUs.
Direkomendasikan
Digital Switch-Mode Power Supply (PFC + DC-DC)
The DSPIC30F6010-20E/PF is well-suited to digital PFC plus isolated DC-DC power supplies, where its 30 MIPS DSP engine runs average-current-mode control loops at 50-100 kHz switching frequency. The 12-bit ADC samples input current and voltage synchronously to the PWM edges, while the on-chip 12-bit DAC provides an analog reference for the housekeeping supply. The 144 KB Flash supports full-state digital-compensation algorithms without external memory.
Direkomendasikan
Industrial Sensor Signal Conditioning
Industrial sensors (strain gauge, thermocouple, load cell) require amplification, filtering and linearization, which the DSPIC30F6010-20E/PF handles with its 12-bit ADC and DSP MAC for FIR/IIR filters. The two UARTs and CAN 2.0B channels simplify connection to industrial fieldbus networks, while the 80-pin TQFP (12x12mm) package exposes enough GPIO to drive multiplexed sensor arrays. Industrial-grade -40 C to +125 C operation supports factory-floor deployment.
Direkomendasikan
Automotive Body and Powertrain ECU
The DSPIC30F6010-20E/PF integrates two CAN 2.0B controllers, 144 KB Flash and a 5 V-tolerant MCU core, suiting it to 12 V automotive body and powertrain ECUs. With its extended -40 C to +125 C temperature grade and motor-control PWM peripherals, the part drives HVAC flaps, electric water pumps and DC motor actuators. Note: AEC-Q100 automotive qualification status is not confirmed in the verified data and should be confirmed with Microchip for new automotive designs.
Direkomendasikan
Solar Micro-Inverter and UPS Controller
The DSPIC30F6010-20E/PF is widely deployed in solar micro-inverter MPPT controllers and line-interactive UPS systems. Its DSP engine executes perturb-and-observe or incremental-conductance MPPT loops in real time, while the PWM module drives the full-bridge IGBT/MOSFET stage. Two CAN channels link to a centralized energy-management bus; the 144 KB Flash stores grid-tie firmware with secure firmware-upgrade support via ICSP.
Direkomendasikan
Embedded Audio / Voice Processing
With its 16-bit MAC and 40-bit accumulator, the DSPIC30F6010-20E/PF implements audio codecs, voice-band echo cancellers and noise-suppression filters in real time. The 12-bit ADC and DAC capture and replay audio at 8-16 kHz sample rates, while 8 KB SRAM holds circular sample buffers. Two UARTs interface to external Bluetooth or VoIP modules, and the 5 V supply simplifies integration with legacy analog audio front-ends.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk DSPIC30F6010-20E/PF — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | DSPIC30F6010A-20E/PF | DSPIC30F6010T-20E/PF | DSPIC30F6010-20E/PT | DSPIC30F5016-20E/PT |
|---|---|---|---|---|---|
| Package | 80-pin TQFP (12x12mm) | 80-pin TQFP (12x12mm) - same | 80-pin TQFP (12x12mm) - same | 80-pin TQFP (14x14mm) - larger body | 64-pin TQFP - smaller pin count |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | dsPIC30F (16-bit DSC) | dsPIC30F (16-bit DSC) | dsPIC30F (16-bit DSC) | dsPIC30F (16-bit DSC) | dsPIC30F (16-bit DSC) |
| Program Flash | 144 KB | 144 KB | 144 KB | 144 KB | 66 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 2 KB |
| CPU Speed | 30 MIPS (40 MHz) | 30 MIPS (40 MHz) | 30 MIPS (40 MHz) | 30 MIPS (40 MHz) | 30 MIPS (40 MHz) |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 2.5 V to 5.5 V |
| ADC | 12-bit, 16 channels | 12-bit, 16 channels | 12-bit, 16 channels | 12-bit, 16 channels | 12-bit, 16 channels |
| CAN | 2 x CAN 2.0B | 2 x CAN 2.0B | 2 x CAN 2.0B | 2 x CAN 2.0B | 1 x CAN 2.0B |
| I/O Pins | 68 | 68 | 68 | 68 | 52 |
Diferensiator Kunci
- Largest Flash density in the dsPIC30F motor-control family (vsDSPIC30F5016-20E/PT)
- Two independent CAN 2.0B controllers (vsDSPIC30F5016-20E/PT)
- True drop-in pin-compatibility with DSPIC30F6010A-20E/PF (vsDSPIC30F6010A-20E/PF)
Catatan Desain
The DSPIC30F6010-20E/PF requires a tightly regulated 4.5-5.5 V supply on VDD and AVDD, with separate analog (AVDD/AVSS) and digital (VDD/VSS) rails joined only at a single point near the IC. Place a 10 uF bulk tantalum and 0.1 uF ceramic decoupling cap within 5 mm of each VDD/AVDD pin pair. If using the on-chip ADC, the AVDD supply must have its own low-noise LDO (such as a 5 V LDO with sub-30 uVrms noise) to avoid coupling switching noise into ADC samples.
Route the ICSP lines (PGED1/PGEC1, PGED2/PGEC2) directly to a 6-pin in-circuit-programming header with no series resistors and keep traces under 100 mm. Place the programming header on the board edge. For the analog section, keep ADC traces short and symmetric, surround analog signals with a ground pour, and never route PWM signals crossing the analog area to avoid di/dt-induced noise coupling into ADC readings.
Common pitfalls with the DSPIC30F6010-20E/PF include (1) attempting to power it from a 3.3 V rail - this part requires 5 V, (2) leaving the ADC's ANx pins floating (always tie unused analog inputs to AVSS or AVDD to prevent shoot-through), (3) exceeding 40 MHz on OSC1 with the wrong PLL configuration, and (4) using the watchdog in windowed mode without first enabling it in the configuration bits - the device will repeatedly reset. Always compile with -mcpu=30F6010 in MPLAB XC16 and confirm the configuration bits match the application note AN1078 defaults for motor control.
The 80-pin TQFP (12x12mm) package has a theta_JA of approximately 40-50 C/W on a 2-layer JEDEC test board; at 40 MHz and full peripheral activity the device dissipates roughly 0.5-0.8 W. For continuous 125 C ambient operation, ensure at least 25 mm^2 of copper ground pour under the exposed die attach pad region and consider forced-air cooling if the design uses 100% peripheral duty cycle.
Informasi Konformitas
RoHS compliance indicated by 'PF' lead-free package suffix per Microchip product documentation. AEC-Q100 automotive qualification status not confirmed in verified data; consult Microchip for automotive-grade ordering codes. Halogen-free status not stated in the provided source data.
