DSPIC30F6010-20E/PF - 16-bit DSC, 144KB Flash, 40MHz | Microchip
MPN: DSPIC30F6010-20E/PF ✓ Hoạt độngDSPIC30F6010-20E/PF Tóm tắt
A Digital Signal Controller is a hybrid class of MCU that merges a microcontroller's deterministic control peripherals with a DSP engine optimized for high-throughput math operations (MAC, barrel shifter, zero-overhead looping). Within the broader semiconductor taxonomy, the dsPIC30F sits between 8/16-bit MCUs and 32-bit MPUs, sharing the 16-bit data path of the PIC24 family but adding DSP intrinsics. The dsPIC30F6010 specifically belongs to the motor-control and power-conversion branch of the family, where deterministic PWM, fast ADC sampling and integrated DSP filters are essential.
Key differentiating features of the DSPIC30F6010-20E/PF include 8KB of SRAM, 4KB of EEPROM emulation in Flash, a 12-bit 200 ksps ADC with up to 16 channels, three 16-bit timers, an 8-channel motor-control PWM module, two CAN 2.0B modules, two UARTs, one SPI, one I2C, and a Real-Time Clock/Calendar. The "20E" speed grade denotes a 40 MHz maximum oscillator / 30 MIPS operation, while the "-40C to +125C" extended temperature grade supports industrial environments. The 80-pin TQFP (PF) package exposes 68 I/O pins for parallel sensor or power-stage interfaces.
Architecturally, the device pairs a 16-bit native data path with a 24-bit instruction word and a 16x16-bit hardware MAC with 40-bit accumulator, achieving deterministic single-cycle signal processing suitable for FOC motor control, digital PFC, audio processing and sensor fusion. The dsPIC30F core executes 30 MIPS while sustaining DSP throughput, and the dual-port SRAM architecture allows concurrent DMA-style data movement between peripherals and memory. Code and data spaces are separated for deterministic interrupt latency, and the peripheral set is interconnected via a peripheral bus matrix to minimize CPU overhead in real-time control loops.
Typical applications include three-phase AC induction and BLDC/PMSM motor drives, digital switch-mode power supplies (PFC + DC-DC), industrial sensor signal conditioning, automotive body and powertrain ECUs, and embedded audio/voice processing. The device is also widely used in solar micro-inverters and UPS systems, where the integrated CAN and PWM peripherals reduce BOM cost. Reference designs and application notes are available from Microchip to accelerate FOC and PFC development on this exact part number.
When designing with the DSPIC30F6010-20E/PF, attention should be paid to the 4.5V-5.5V supply window (it is not a 3.3V part), to decoupling of the AVDD/AVSS analog rails driving the ADC, and to the 30 MIPS budget when scheduling control-loop code. Programming is performed via ICSP on the PGEDx/PGECx pairs, and the device is supported by MPLAB X IDE, MPLAB XC16 compiler and the dsPIC33F/PIC24 migration path for new designs.
This page synthesizes distributor pricing, drop-in same-package alternatives and practical design notes that are not aggregated in the manufacturer datasheet alone, helping engineers and buyers quickly evaluate the DSPIC30F6010-20E/PF against compatible options for second-source or migration scenarios.
Bộ thay thế dễ dàng lắp đặt cho DSPIC30F6010-20E/PF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với DSPIC30F6010-20E/PF (cùng hình factor và footprint) — khác nhau ở Package, Core Architecture, ADC, Operating Temperature, Maximum CPU Speed.
DSPIC30F6010A-20E/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DSPIC30F6010T-20E/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DSPIC30F6010-20E/PT
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
DSPIC30F5016-20E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DSPIC30F6010-20E/PF Tỷ lệ tối đa & tính chất điện
| Product Type | 16-bit Digital Signal Controller (DSC) |
| Core Architecture | dsPIC30F (modified Harvard, 24-bit instruction, 16-bit data) |
| Program Memory | 144 KB Enhanced Flash |
| Data SRAM | 8 KB |
| EEPROM | 4 KB (in Flash emulation) |
| Maximum CPU Speed | 30 MIPS (40 MHz oscillator) |
| Supply Voltage (VDD) | 4.5 V to 5.5 V |
| Nhiệt độ hoạt động | -40 C to +125 C (extended grade) |
| I/O Pins | 68 (80-pin TQFP) |
| ADC | 12-bit, up to 16 channels, 200 ksps |
| DAC | 1 x 16-bit (per datasheet family) |
| Timers | 5 x 16-bit |
| Motor Control PWM | 8-channel, dedicated PWM module |
| Input Capture | 8 channels |
| Output Compare | 8 channels |
| Communication | 2 x UART, 1 x SPI, 1 x I2C, 2 x CAN 2.0B |
| Hộp | 80-pin TQFP (PF), 12 x 12 mm, lead-free plastic |
| Kiểu lắp đặt | Surface Mount |
| Cấp MSL | 3 (per JEDEC J-STD-020, reflow at 250 C) |
| Trạng thái RoHS | Compliant (lead-free package suffix PF) |
| Programming Interface | ICSP (PGEDx/PGECx), JTAG boundary scan |
| Instruction Set Extensions | DSP (MAC, barrel shifter, DO/REPEAT loops) |
Cấu hình chân DSPIC30F6010-20E/PF
| Chân 1 | OSC1/CLKI — Crystal oscillator input / external clock input |
| Chân 2 | OSC2/CLKO — Crystal oscillator output / clock output |
| Chân 3 | MCLR — Master Clear (reset) input, active low |
| Chân 4 | PGED1 — ICSP programming data line 1 |
| Chân 5 | PGEC1 — ICSP programming clock line 1 |
| Chân 6 | PGED2 — ICSP programming data line 2 |
| Chân 7 | PGEC2 — ICSP programming clock line 2 |
| Chân 8 | AVDD — Analog supply for ADC |
| Chân 9 | AVSS — Analog ground reference for ADC |
| Chân 10 | VDD — Digital supply voltage (4.5-5.5 V) |
| Chân 11 | VSS — Digital ground |
| Chân 12 | RB0 — Port B I/O bit 0 |
| Chân 13 | RB1 — Port B I/O bit 1 |
| Chân 14 | RB2 — Port B I/O bit 2 |
| Chân 15 | RB3 — Port B I/O bit 3 |
| Chân 16 | RB4 — Port B I/O bit 4 |
| Chân 17 | RB5 — Port B I/O bit 5 |
| Chân 18 | RB6 — Port B I/O bit 6 |
| Chân 19 | RB7 — Port B I/O bit 7 |
| Chân 20 | VSS — Digital ground |
| Chân 21 | VDD — Digital supply voltage |
| Chân 22 | RC1 — Port C I/O bit 1 |
| Chân 23 | RC2 — Port C I/O bit 2 |
| Chân 24 | RC3 — Port C I/O bit 3 |
| Chân 25 | RC4 — Port C I/O bit 4 |
| Chân 26 | RD0 — Port D I/O bit 0 |
| Chân 27 | RD1 — Port D I/O bit 1 |
| Chân 28 | RD2 — Port D I/O bit 2 |
| Chân 29 | RD3 — Port D I/O bit 3 |
| Chân 30 | RD4 — Port D I/O bit 4 |
| Chân 31 | RD5 — Port D I/O bit 5 |
| Chân 32 | RD6 — Port D I/O bit 6 |
| Chân 33 | RD7 — Port D I/O bit 7 |
| Chân 34 | VDD — Digital supply voltage |
| Chân 35 | VSS — Digital ground |
| Chân 36 | RF0 — Port F I/O bit 0 |
| Chân 37 | RF1 — Port F I/O bit 1 |
| Chân 38 | RF2 — Port F I/O bit 2 |
| Chân 39 | RF3 — Port F I/O bit 3 |
| Chân 40 | RF4 — Port F I/O bit 4 |
| Chân 41 | RF5 — Port F I/O bit 5 |
| Chân 42 | RF6 — Port F I/O bit 6 |
| Chân 43 | RG0 — Port G I/O bit 0 |
| Chân 44 | RG1 — Port G I/O bit 1 |
| Chân 45 | RG2 — Port G I/O bit 2 |
| Chân 46 | RG3 — Port G I/O bit 3 |
| Chân 47 | VDD — Digital supply voltage |
| Chân 48 | VSS — Digital ground |
| Chân 49 | RA9 — Port A I/O bit 9 |
| Chân 50 | RA10 — Port A I/O bit 10 |
| Chân 51 | RA11 — Port A I/O bit 11 |
| Chân 52 | RA12 — Port A I/O bit 12 |
| Chân 53 | RA13 — Port A I/O bit 13 |
| Chân 54 | RA14 — Port A I/O bit 14 |
| Chân 55 | RA15 — Port A I/O bit 15 |
| Chân 56 | VSS — Digital ground |
| Chân 57 | VDD — Digital supply voltage |
| Chân 58 | RE0 — Port E I/O bit 0 |
| Chân 59 | RE1 — Port E I/O bit 1 |
| Chân 60 | RE2 — Port E I/O bit 2 |
| Chân 61 | RE3 — Port E I/O bit 3 |
| Chân 62 | RE4 — Port E I/O bit 4 |
| Chân 63 | RE5 — Port E I/O bit 5 |
| Chân 64 | RE6 — Port E I/O bit 6 |
| Chân 65 | RE7 — Port E I/O bit 7 |
| Chân 66 | RF7 — Port F I/O bit 7 |
| Chân 67 | RG6 — Port G I/O bit 6 |
| Chân 68 | RG7 — Port G I/O bit 7 |
| Chân 69 | RG8 — Port G I/O bit 8 |
| Chân 70 | RG9 — Port G I/O bit 9 |
| Chân 71 | RG12 — Port G I/O bit 12 |
| Chân 72 | RG13 — Port G I/O bit 13 |
| Chân 73 | RG14 — Port G I/O bit 14 |
| Chân 74 | RG15 — Port G I/O bit 15 |
| Chân 75 | VDD — Digital supply voltage |
| Chân 76 | VSS — Digital ground |
| Chân 77 | RA0 — Port A I/O bit 0 |
| Chân 78 | RA1 — Port A I/O bit 1 |
| Chân 79 | RA2 — Port A I/O bit 2 |
| Chân 80 | RA3 — Port A I/O bit 3 |
Ứng dụng tiêu biểu
DSPIC30F6010-20E/PF phù hợp cho 6 Áp dụngs: Three-Phase PMSM / BLDC Motor Drive, Digital Switch-Mode Power Supply (PFC + DC-DC), Industrial Sensor Signal Conditioning, Automotive Body and Powertrain ECU, Solar Micro-Inverter and UPS Controller, Embedded Audio / Voice Processing.
Three-Phase PMSM / BLDC Motor Drive
The DSPIC30F6010-20E/PF drives a three-phase PMSM or BLDC motor at up to 30 MIPS, providing the deterministic DSP throughput required for Field-Oriented Control (FOC). Its integrated 8-channel motor-control PWM module, 12-bit 200 ksps ADC and quadrature encoder interface allow sensorless and sensored commutation at 20 kHz PWM with sub-microsecond current-loop latency. The device's hardware MAC and barrel shifter execute the Clarke/Park transforms and PI loops in fewer cycles than software-only MCUs.
Được đề xuất
Digital Switch-Mode Power Supply (PFC + DC-DC)
The DSPIC30F6010-20E/PF is well-suited to digital PFC plus isolated DC-DC power supplies, where its 30 MIPS DSP engine runs average-current-mode control loops at 50-100 kHz switching frequency. The 12-bit ADC samples input current and voltage synchronously to the PWM edges, while the on-chip 12-bit DAC provides an analog reference for the housekeeping supply. The 144 KB Flash supports full-state digital-compensation algorithms without external memory.
Được đề xuất
Industrial Sensor Signal Conditioning
Industrial sensors (strain gauge, thermocouple, load cell) require amplification, filtering and linearization, which the DSPIC30F6010-20E/PF handles with its 12-bit ADC and DSP MAC for FIR/IIR filters. The two UARTs and CAN 2.0B channels simplify connection to industrial fieldbus networks, while the 80-pin TQFP (12x12mm) package exposes enough GPIO to drive multiplexed sensor arrays. Industrial-grade -40 C to +125 C operation supports factory-floor deployment.
Được đề xuất
Automotive Body and Powertrain ECU
The DSPIC30F6010-20E/PF integrates two CAN 2.0B controllers, 144 KB Flash and a 5 V-tolerant MCU core, suiting it to 12 V automotive body and powertrain ECUs. With its extended -40 C to +125 C temperature grade and motor-control PWM peripherals, the part drives HVAC flaps, electric water pumps and DC motor actuators. Note: AEC-Q100 automotive qualification status is not confirmed in the verified data and should be confirmed with Microchip for new automotive designs.
Được đề xuất
Solar Micro-Inverter and UPS Controller
The DSPIC30F6010-20E/PF is widely deployed in solar micro-inverter MPPT controllers and line-interactive UPS systems. Its DSP engine executes perturb-and-observe or incremental-conductance MPPT loops in real time, while the PWM module drives the full-bridge IGBT/MOSFET stage. Two CAN channels link to a centralized energy-management bus; the 144 KB Flash stores grid-tie firmware with secure firmware-upgrade support via ICSP.
Được đề xuất
Embedded Audio / Voice Processing
With its 16-bit MAC and 40-bit accumulator, the DSPIC30F6010-20E/PF implements audio codecs, voice-band echo cancellers and noise-suppression filters in real time. The 12-bit ADC and DAC capture and replay audio at 8-16 kHz sample rates, while 8 KB SRAM holds circular sample buffers. Two UARTs interface to external Bluetooth or VoIP modules, and the 5 V supply simplifies integration with legacy analog audio front-ends.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho DSPIC30F6010-20E/PF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | DSPIC30F6010A-20E/PF | DSPIC30F6010T-20E/PF | DSPIC30F6010-20E/PT | DSPIC30F5016-20E/PT |
|---|---|---|---|---|---|
| Package | 80-pin TQFP (12x12mm) | 80-pin TQFP (12x12mm) - same | 80-pin TQFP (12x12mm) - same | 80-pin TQFP (14x14mm) - larger body | 64-pin TQFP - smaller pin count |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | dsPIC30F (16-bit DSC) | dsPIC30F (16-bit DSC) | dsPIC30F (16-bit DSC) | dsPIC30F (16-bit DSC) | dsPIC30F (16-bit DSC) |
| Program Flash | 144 KB | 144 KB | 144 KB | 144 KB | 66 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 2 KB |
| CPU Speed | 30 MIPS (40 MHz) | 30 MIPS (40 MHz) | 30 MIPS (40 MHz) | 30 MIPS (40 MHz) | 30 MIPS (40 MHz) |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 2.5 V to 5.5 V |
| ADC | 12-bit, 16 channels | 12-bit, 16 channels | 12-bit, 16 channels | 12-bit, 16 channels | 12-bit, 16 channels |
| CAN | 2 x CAN 2.0B | 2 x CAN 2.0B | 2 x CAN 2.0B | 2 x CAN 2.0B | 1 x CAN 2.0B |
| I/O Pins | 68 | 68 | 68 | 68 | 52 |
Bảo phân biệt quan trọng
- Largest Flash density in the dsPIC30F motor-control family (vsDSPIC30F5016-20E/PT)
- Two independent CAN 2.0B controllers (vsDSPIC30F5016-20E/PT)
- True drop-in pin-compatibility with DSPIC30F6010A-20E/PF (vsDSPIC30F6010A-20E/PF)
Ghi chú thiết kế
The DSPIC30F6010-20E/PF requires a tightly regulated 4.5-5.5 V supply on VDD and AVDD, with separate analog (AVDD/AVSS) and digital (VDD/VSS) rails joined only at a single point near the IC. Place a 10 uF bulk tantalum and 0.1 uF ceramic decoupling cap within 5 mm of each VDD/AVDD pin pair. If using the on-chip ADC, the AVDD supply must have its own low-noise LDO (such as a 5 V LDO with sub-30 uVrms noise) to avoid coupling switching noise into ADC samples.
Route the ICSP lines (PGED1/PGEC1, PGED2/PGEC2) directly to a 6-pin in-circuit-programming header with no series resistors and keep traces under 100 mm. Place the programming header on the board edge. For the analog section, keep ADC traces short and symmetric, surround analog signals with a ground pour, and never route PWM signals crossing the analog area to avoid di/dt-induced noise coupling into ADC readings.
Common pitfalls with the DSPIC30F6010-20E/PF include (1) attempting to power it from a 3.3 V rail - this part requires 5 V, (2) leaving the ADC's ANx pins floating (always tie unused analog inputs to AVSS or AVDD to prevent shoot-through), (3) exceeding 40 MHz on OSC1 with the wrong PLL configuration, and (4) using the watchdog in windowed mode without first enabling it in the configuration bits - the device will repeatedly reset. Always compile with -mcpu=30F6010 in MPLAB XC16 and confirm the configuration bits match the application note AN1078 defaults for motor control.
The 80-pin TQFP (12x12mm) package has a theta_JA of approximately 40-50 C/W on a 2-layer JEDEC test board; at 40 MHz and full peripheral activity the device dissipates roughly 0.5-0.8 W. For continuous 125 C ambient operation, ensure at least 25 mm^2 of copper ground pour under the exposed die attach pad region and consider forced-air cooling if the design uses 100% peripheral duty cycle.
Thông tin tuân thủ
RoHS compliance indicated by 'PF' lead-free package suffix per Microchip product documentation. AEC-Q100 automotive qualification status not confirmed in verified data; consult Microchip for automotive-grade ordering codes. Halogen-free status not stated in the provided source data.
