EPM5192GM-2 - 192-Macrocell MAX 5000 EPLD, PGA-84, 55ns | Intel
MPN: EPM5192GM-2 ✗ Akhir HidupEPM5192GM-2 Ringkasan
What is an EPLD? An Erasable Programmable Logic Device (EPLD) is a non-volatile programmable logic component that combines the integration density of early PLDs with the architectural flexibility of more complex PLDs. MAX 5000 devices sit in the product hierarchy as follows: programmable logic device (PLD) -> EPLD -> CMOS EPLD -> MAX 5000 family -> high-density EPLD. MAX 5000 EPLDs were widely used to replace multiple discrete PAL/GAL devices with a single reprogrammable chip, and the ceramic windowed PGA package enabled in-system UV erasure for prototyping and design iteration.
Key features of the EPM5192GM-2 include 192 macrocells, a 55 ns propagation delay grade (the -2 speed grade), CMOS low-power operation, and pin compatibility across the MAX 5000 macrocell range. The 84-pin ceramic PGA package supports the wide I/O count required for bus-interface and datapath applications while providing hermetic environmental protection suitable for military temperature ranges.
Architecturally, the device integrates a programmable AND/OR array feeding 192 macrocells, each with configurable flip-flops, plus a global interconnect that routes signals across the chip with predictable, deterministic timing. The CMOS implementation delivers substantially lower power than the bipolar PLDs that preceded the MAX 5000 family, and the UV window allows laboratory erasure and reprogramming during development cycles.
Typical applications include military and aerospace systems (the -2 speed grade and ceramic package support defense-grade designs), industrial control glue logic, telecommunications interface bridging, and legacy replacement of multiple 22V10-class PALs. The 84-pin ceramic PGA is also favored in space and avionics where hermetic packaging and known-good-die reliability are required.
When designing with this part, verify availability through franchised distributors before committing to a new design. The MAX 5000 family is mature, and long-term production status should be confirmed against Intel's product longevity program for military and aerospace programs requiring multi-decade supply commitments.
This page synthesizes Altera MAX 5000 datasheet parameters, drop-in package-compatible alternatives, and practical design notes that are not aggregated on a single distributor page.
Alternatif penggantian untuk EPM5192GM-2 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EPM5192GM-2 (sama faktor bentuk dan footprint) — berbeda di dalam Device Type, Package, Mounting Type, Process Technology, Propagation Delay (tPD).
EPM5192GM
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →EPM5192GM-1
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →EPM5192GM-1/883B
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →EPM5130GM883B
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →EPM5128GM/883B
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →EPM5192GM-2 Rating Maksimal & Karakteristik Listrik
| Family | Altera MAX 5000 |
| Device Type | EPLD (Erasable Programmable Logic Device) |
| Macrocell Count | 192 |
| Propagation Delay (tPD) | 55 ns |
| Speed Grade | -2 |
| Process Technology | CMOS |
| Programmability | UV-erasable (windowed package) |
| Paket | PGA-84 (Ceramic Pin Grid Array, windowed) |
| Jumlah Pin | 84 |
| Tipe Mounting | Through-hole (PGA socket) |
| Datasheet Page Count | 52 |
Konfigurasi Pin EPM5192GM-2
| Pin produk A1 | I/O — General-purpose I/O pin (function per Altera MAX 5000 datasheet) |
| Pin produk A2 | I/O — General-purpose I/O pin |
| Pin produk A3 | I/O — General-purpose I/O pin |
| Pin produk A4 | I/O — General-purpose I/O pin |
| Pin produk A5 | I/O — General-purpose I/O pin |
| Pin produk A6 | I/O — General-purpose I/O pin |
| Pin produk A7 | GND — Ground |
| Pin produk A8 | I/O — General-purpose I/O pin |
| Pin produk A9 | I/O — General-purpose I/O pin |
| Pin produk A10 | I/O — General-purpose I/O pin |
| Pin produk A11 | I/O — General-purpose I/O pin |
| Pin produk B1 | I/O — General-purpose I/O pin |
| Pin produk B2 | I/O — General-purpose I/O pin |
| Pin produk B3 | I/O — General-purpose I/O pin |
| Pin produk B4 | I/O — General-purpose I/O pin |
| Pin produk B5 | I/O — General-purpose I/O pin |
| Pin produk B6 | I/O — General-purpose I/O pin |
| Pin produk B7 | I/O — General-purpose I/O pin |
| Pin produk B8 | I/O — General-purpose I/O pin |
| Pin produk B9 | I/O — General-purpose I/O pin |
| Pin produk B10 | I/O — General-purpose I/O pin |
| Pin produk B11 | I/O — General-purpose I/O pin |
| Pin produk C1 | I/O — General-purpose I/O pin |
| Pin produk C2 | I/O — General-purpose I/O pin |
| Pin produk C3 | GND — Ground |
| Pin produk C4 | I/O — General-purpose I/O pin |
| Pin produk C5 | I/O — General-purpose I/O pin |
| Pin produk C6 | I/O — General-purpose I/O pin |
| Pin produk C7 | I/O — General-purpose I/O pin |
| Pin produk C8 | I/O — General-purpose I/O pin |
| Pin produk C9 | GND — Ground |
| Pin produk C10 | I/O — General-purpose I/O pin |
| Pin produk C11 | I/O — General-purpose I/O pin |
| Pin produk D1 | I/O — General-purpose I/O pin |
| Pin produk D2 | I/O — General-purpose I/O pin |
| Pin produk D3 | I/O — General-purpose I/O pin |
| Pin produk D4 | I/O — General-purpose I/O pin |
| Pin produk D5 | I/O — General-purpose I/O pin |
| Pin produk D6 | I/O — General-purpose I/O pin |
| Pin produk D7 | I/O — General-purpose I/O pin |
| Pin produk D8 | I/O — General-purpose I/O pin |
| Pin produk D9 | I/O — General-purpose I/O pin |
| Pin produk D10 | I/O — General-purpose I/O pin |
| Pin produk D11 | I/O — General-purpose I/O pin |
| Pin produk E1 | GND — Ground |
| Pin produk E2 | I/O — General-purpose I/O pin |
| Pin produk E3 | I/O — General-purpose I/O pin |
| Pin produk E4 | I/O — General-purpose I/O pin |
| Pin produk E5 | VCC — Positive supply (typically 5 V) |
| Pin produk E6 | I/O — General-purpose I/O pin |
| Pin produk E7 | I/O — General-purpose I/O pin |
| Pin produk E8 | I/O — General-purpose I/O pin |
| Pin produk E9 | I/O — General-purpose I/O pin |
| Pin produk E10 | I/O — General-purpose I/O pin |
| Pin produk E11 | VCC — Positive supply (typically 5 V) |
| Pin produk F1 | I/O — General-purpose I/O pin |
| Pin produk F2 | I/O — General-purpose I/O pin |
| Pin produk F3 | I/O — General-purpose I/O pin |
| Pin produk F4 | I/O — General-purpose I/O pin |
| Pin produk F5 | I/O — General-purpose I/O pin |
| Pin produk F6 | I/O — General-purpose I/O pin |
| Pin produk F7 | I/O — General-purpose I/O pin |
| Pin produk F8 | I/O — General-purpose I/O pin |
| Pin produk F9 | I/O — General-purpose I/O pin |
| Pin produk F10 | I/O — General-purpose I/O pin |
| Pin produk F11 | I/O — General-purpose I/O pin |
| Pin produk G1 | I/O — General-purpose I/O pin |
| Pin produk G2 | GND — Ground |
| Pin produk G3 | I/O — General-purpose I/O pin |
| Pin produk G4 | I/O — General-purpose I/O pin |
| Pin produk G5 | I/O — General-purpose I/O pin |
| Pin produk G6 | I/O — General-purpose I/O pin |
| Pin produk G7 | I/O — General-purpose I/O pin |
| Pin produk G8 | I/O — General-purpose I/O pin |
| Pin produk G9 | I/O — General-purpose I/O pin |
| Pin produk G10 | GND — Ground |
| Pin produk G11 | I/O — General-purpose I/O pin |
| Pin produk H1 | I/O — General-purpose I/O pin |
| Pin produk H2 | I/O — General-purpose I/O pin |
| Pin produk H3 | I/O — General-purpose I/O pin |
| Pin produk H4 | I/O — General-purpose I/O pin |
| Pin produk H5 | I/O — General-purpose I/O pin |
| Pin produk H6 | I/O — General-purpose I/O pin |
| Pin produk H7 | I/O — General-purpose I/O pin |
| Pin produk H8 | I/O — General-purpose I/O pin |
| Pin produk H9 | I/O — General-purpose I/O pin |
| Pin produk H10 | I/O — General-purpose I/O pin |
| Pin produk H11 | I/O — General-purpose I/O pin |
Aplikasi Umum
EPM5192GM-2 cocok untuk 6 aplikasis: Military and Aerospace Avionics Bus Interface, Industrial Control Glue Logic Consolidation, Telecommunications Backplane Address Decoding, Legacy Computer Peripheral Replacement, Prototype and Engineering Development Platform, Space and Radiation-Tolerant Subsystems.
Military and Aerospace Avionics Bus Interface
The EPM5192GM-2 is well matched to MIL-STD-1553, ARINC 429, and legacy avionics bus-interface consolidation, where the ceramic PGA package provides hermeticity required for flight-qualified hardware. With 192 macrocells, the device can absorb an entire bus-interface state machine, encoder/decoder glue, and interrupt-priority logic in one chip, eliminating 6-10 discrete 22V10 PALs. The 55 ns propagation delay comfortably handles sub-10 MHz avionics bus rates with timing margin. Designers should plan for the through-hole PGA socket to support field-replacement and the UV window to support bench-level firmware updates between flight-qualification cycles.
Direkomendasikan
Industrial Control Glue Logic Consolidation
In PLC backplanes, motor-drive controllers, and process-control I/O modules, the EPM5192GM-2 replaces a board-full of discrete 22V10/26V12 PALs with a single high-density EPLD, shrinking the BOM and easing inventory. The 192 macrocells easily handle address decoding across 16-24 bit address buses, peripheral chip-select generation, and watchdog state machines. The CMOS process keeps quiescent power manageable even with all 192 macrocells active, and the wide supply tolerance of the MAX 5000 family tolerates the noisy 5 V rails common in industrial cabinets. Industrial users should plan a re-evaluation against MAX V/MAX 10 CPLDs for new designs.
Direkomendasikan
Telecommunications Backplane Address Decoding
The EPM5192GM-2 is widely deployed in legacy telecom backplanes to decode multi-processor address spaces, generate chip-selects for shared memory, and arbitrate DMA channels on VME or Multibus II buses. The 84-pin PGA package exposes enough I/O to drive 8-10 chip-selects plus control strobes directly, and the deterministic 55 ns delay simplifies worst-case timing closure. Because telecom OEMs maintain equipment for 20-30 years, the EPM5192GM-2's mature status is actually an advantage - the part is unlikely to be obsoleted mid-program. Lifecycle planning should include stocking safety stock and qualifying the EPM5192GM-1 grade as a second source.
Direkomendasikan
Legacy Computer Peripheral Replacement
The EPM5192GM-2 is commonly used to sustain legacy VMEbus, VXIbus, and Multibus systems by emulating obsolete peripheral controllers, DMA engines, and interrupt handlers in a single reprogrammable device. The 192-macrocell density handles the equivalent of 8-12 discrete PALs and a handful of 74LS glue logic, restoring board functionality without re-spinning the entire backplane. The UV window allows engineering teams to iterate firmware fixes for new peripheral attachments without board rework. Recommended pairing with the EPM5192GM-1 grade when timing margin becomes a concern in faster peripheral upgrades.
Direkomendasikan
Prototype and Engineering Development Platform
The EPM5192GM-2's UV-transparent ceramic window makes it a strong laboratory workhorse for developing and iterating state machines, datapath controllers, and interface bridges before committing to one-time-programmable or modern CPLD silicon. Engineers can erase and re-program the device 50-100 times during development, then migrate the verified netlist to a production CPLD (MAX 7000 or MAX V) once the design stabilizes. The 84-pin PGA socket simplifies board bring-up and design swaps. For sustained production, transition to a non-windowed ceramic or plastic package variant from the same MAX 5000 family.
Direkomendasikan
Space and Radiation-Tolerant Subsystems
Although not formally radiation-hardened, the EPM5192GM-2's ceramic PGA packaging, mature CMOS process, and Altera MAX 5000 family heritage make it a candidate for non-critical subsystems in low-earth-orbit small-satellite constellations where radiation tolerance budgets allow commercial-grade silicon. The 192 macrocells can host command/telemetry handling, sensor-multiplexing logic, and attitude-control state machines in a single package, reducing board area and mass compared to discrete PAL implementations. The ceramic PGA also tolerates the wide temperature swings of orbital environments better than plastic packages. Mission planners should still perform lot-specific radiation characterization and consider QML-V or QML-Q equivalents for critical functions.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EPM5192GM-2 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EPM5192GM | EPM5192GM-1 | EPM5192GM-1/883B | EPM5130GM883B | EPM5128GM/883B |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | PGA-84 (Ceramic, Windowed) | PGA-84 (Ceramic, Windowed) - same | PGA-84 (Ceramic, Windowed) - same | PGA-84 (Ceramic, Windowed) - same | PGA-84 (Ceramic, Windowed) - same | PGA-84 (Ceramic, Windowed) - same |
| Macrocell Count | 192 | 192 (same die) | 192 (same die) | 192 (same die) | 128 (-33%) | 128 (-33%) |
| Speed Grade | -2 (55 ns) | Default grade | -1 (faster than -2) | -1 + MIL-STD-883B | MIL-STD-883B screened | MIL-STD-883B screened |
| Process / Technology | CMOS, UV-erasable | CMOS, UV-erasable | CMOS, UV-erasable | CMOS, UV-erasable | CMOS, UV-erasable | CMOS, UV-erasable |
| MIL-STD-883B Screening | No (industrial lot) | No | No | Yes | Yes | Yes |
| UV Erasure Window | Yes | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Obsolete / Last-time-buy | Obsolete / Last-time-buy | Obsolete / Last-time-buy | Mature, MIL supply may extend | Mature, MIL supply may extend | Mature, MIL supply may extend |
Diferensiator Kunci
- Same die as -1 grade, lower cost per unit at relaxed timing (vsEPM5192GM-1)
- Higher macrocell density in the same footprint (vsEPM5128GM/883B)
- Industrial-grade screening, lowest unit price among PGA-84 MAX 5000 family (vsEPM5192GM-1/883B)
Catatan Desain
The ceramic PGA-84 package of the EPM5192GM-2 is hermetic and offers good thermal conductivity but the through-hole pin grid is sized for socket mounting rather than direct PCB heatsinking. Estimate: at 5 V VCC with all 192 macrocells switching at moderate toggle rates, junction-to-ambient thermal resistance (theta_JA) for a PGA-84 in still air is typically 30-40 C/W. Mount the device in a PGA socket with adequate clearance above the PCB; do not pot or encapsulate the UV window.
Use a high-quality PGA-84 socket (e.g., machine-pin or low-insertion-force type) rated for at least 100 insertion cycles to support field replacement and laboratory UV-erase/reprogramming cycles. Decouple each VCC pin with a 0.1 uF ceramic capacitor placed as close to the pin lead as the socket geometry allows, plus a bulk 10 uF tantalum near the socket. Maintain a ground plane on an inner PCB layer and stitch the PGA socket perimeter with multiple ground via rows for signal-integrity and EMI suppression.
Do not use a plastic-erasable-window simulator (plastic packages) when designing the UV-erase procedure - only the ceramic-windowed PGA variant erases properly under UV exposure. Cover the quartz window with opaque electrical tape after programming to prevent accidental erasure from ambient UV (sunlight through windows, fluorescent lamps). For prototype re-erase cycles, use a calibrated UV eraser rated at the wavelength and intensity specified in the Altera MAX 5000 datasheet - typically 12 mW/cm^2 at 253.7 nm for 20-30 minutes.
Informasi Konformitas
Ceramic PGA with UV window typically non-RoHS due to historical lead-bearing ceramic/brazing materials. RoHS and lead-free status must be verified lot-by-lot with the franchised distributor. AEC-Q100 is not applicable - this is a programmable logic device, not an automotive analog/digital IC. The /883B variants carry MIL-STD-883B environmental screening instead.
