NXP Semiconductors
MCF5407CAI220 - ColdFire V4 32-bit MPU 220MHz | NXP
MPN: MCF5407CAI220 ✗ Akhir Hidup
208-FQFP (28x28 mm) Package
220 MHz Speed
ROMless Memory
MOQ: 1 |
MCF5407CAI220 Ringkasan
The NXP Semiconductors MCF5407CAI220 is a 32-bit ColdFire V4 microprocessor unit (MPU) running at up to 220 MHz core clock, housed in a 208-pin FQFP (28x28 mm) surface-mount package and offering ROMless operation with 4 KB of internal SRAM. As the first standard MPU to implement the ColdFire V4 core, it delivers up to 316 Dhrystone MIPS while keeping an easy-to-use lower-speed system interface for legacy ColdFire designs.
A microprocessor (MPU) is a CPU-centric integrated circuit that requires external memory and peripherals, sitting at the top of the embedded hierarchy: MPU > microcontroller > SoC > ASIC. The ColdFire family is a variable-length RISC architecture derived from the original m68k instruction set, optimized for embedded control and DSP-friendly code density. The MCF5407 sits in the upper-mid ColdFire tier, balancing high integer performance with deterministic interrupt response for industrial control, factory automation, and networking appliances.
Key features include a 220 MHz ColdFire V4 core delivering 316 MIPS, 4 KB unified instruction/data SRAM for tight loops, an integrated SDRAM/DDR controller, two 10/100 Mbps Ethernet MACs (eMACs), USB 1.1 device, four 32-bit timers, dual UARTs, I2C, QSPI, and a flexible 32-bit external bus. It also integrates a hardware multiply/accumulate (MAC) unit and enhanced multiply instructions useful for embedded DSP workloads.
Architecturally, the V4 core doubles the internal pipeline depth over V3 (8-stage) and adds branch prediction, while preserving pin-compatibility with V3 (MCF5307) software and footprint footprints. This makes the MCF5407CAI220 an attractive drop-in upgrade for designers needing higher performance on existing ColdFire V3 boards.
Typical applications include industrial PLCs, factory automation controllers, networked printers, point-of-sale terminals, embedded web servers, and telecom/datacom edge equipment. The dual Ethernet MACs and USB 1.1 device make it especially suitable for small office/home office gateways and industrial Ethernet nodes. Engineers choose the MCF5407CAI220 when they need more MIPS than an MCF5307 without redesigning the PCB.
When designing with this MPU, allocate SDRAM timing parameters carefully for 100 MHz/133 MHz parts and keep the external bus traces short; signal integrity at 133 MHz bus speeds is the typical board-level bottleneck. Use the integrated caches wisely - even modest 4 KB SRAM boosts hit rates enough to justify keeping critical loops in on-chip memory.
A microprocessor (MPU) is a CPU-centric integrated circuit that requires external memory and peripherals, sitting at the top of the embedded hierarchy: MPU > microcontroller > SoC > ASIC. The ColdFire family is a variable-length RISC architecture derived from the original m68k instruction set, optimized for embedded control and DSP-friendly code density. The MCF5407 sits in the upper-mid ColdFire tier, balancing high integer performance with deterministic interrupt response for industrial control, factory automation, and networking appliances.
Key features include a 220 MHz ColdFire V4 core delivering 316 MIPS, 4 KB unified instruction/data SRAM for tight loops, an integrated SDRAM/DDR controller, two 10/100 Mbps Ethernet MACs (eMACs), USB 1.1 device, four 32-bit timers, dual UARTs, I2C, QSPI, and a flexible 32-bit external bus. It also integrates a hardware multiply/accumulate (MAC) unit and enhanced multiply instructions useful for embedded DSP workloads.
Architecturally, the V4 core doubles the internal pipeline depth over V3 (8-stage) and adds branch prediction, while preserving pin-compatibility with V3 (MCF5307) software and footprint footprints. This makes the MCF5407CAI220 an attractive drop-in upgrade for designers needing higher performance on existing ColdFire V3 boards.
Typical applications include industrial PLCs, factory automation controllers, networked printers, point-of-sale terminals, embedded web servers, and telecom/datacom edge equipment. The dual Ethernet MACs and USB 1.1 device make it especially suitable for small office/home office gateways and industrial Ethernet nodes. Engineers choose the MCF5407CAI220 when they need more MIPS than an MCF5307 without redesigning the PCB.
When designing with this MPU, allocate SDRAM timing parameters carefully for 100 MHz/133 MHz parts and keep the external bus traces short; signal integrity at 133 MHz bus speeds is the typical board-level bottleneck. Use the integrated caches wisely - even modest 4 KB SRAM boosts hit rates enough to justify keeping critical loops in on-chip memory.
Alternatif penggantian untuk MCF5407CAI220 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MCF5407CAI220 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Performance, UART, Internal SRAM, Program Memory Type.
NXP Semiconductors
Performance: 70 MIPS
Program Memory Type: ROMless
Bandingkan dengan MCF5407CAI220 →
NXP Semiconductors
UART: 2x integrated
Internal SRAM: 4 KB unified
Bandingkan dengan MCF5407CAI220 →
NXP Semiconductors
Package: 208-FQFP (28 x 28 mm)
UART: 4 (peripherals)
Internal SRAM: 4 KB
Bandingkan dengan MCF5407CAI220 →
NXP Semiconductors
Package: 208-FQFP (28 x 28 mm), 208-BFQFP
Performance: up to 316 (Dhrystone, per NXP product information)
Internal SRAM: 4 KB
Bandingkan dengan MCF5407CAI220 →
MCF5407AFB162
✅ Drop-In📦 208-FQFP
same 208-FQFP footprint, 162 MHz vs 220 MHz (-26% clock), pin-compatible
📋 Alternatif referensi (tidak dalam katalog)
MCF5407AI162
✅ Drop-InNXP Semiconductors
📦 208-FQFP
ColdFire V4 (32-bit variable-length RISC) · 162 MHz · 316 MIPS · 4 KB unified · ROMless (external Flash required) · 208-FQFP (28x28 mm) · Surface Mount · 10/100 Mbit/s integrated
Kontak untuk harga
Lihat Datasheet →MCF5307AI66B
✅ Drop-InNXP Semiconductors
📦 208-FQFP
ColdFire V3 (MCF530x) · 32-Bit · 66 MHz · 70 MIPS · ROMless · 4 KB SRAM · EBI/EMI, I2C, UART/USART · DMA, POR, WDT
Kontak untuk harga
Lihat Datasheet →MCF5407CAI162
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanNXP Semiconductors
📦 208-FQFP
ColdFire V4 (MCF540x) · 32-Bit · 162 MHz · ROMless · 4 KB · 3.3 V · RISC (ColdFire / 68K-derived) · 0.22 um
Kontak untuk harga
Lihat Datasheet →MCF5407AFE220
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📦 208-FQFP
same 208-FQFP footprint, 220 MHz same speed, LQFP/FQFP variant from same die
📋 Alternatif referensi (tidak dalam katalog)
MCF5407CAI220 Rating Maksimal & Karakteristik Listrik
| Core | ColdFire V4 (32-bit) |
| Core Clock Frequency | 220 MHz |
| Performance | 316 Dhrystone MIPS |
| On-chip SRAM | 4 KB |
| On-chip ROM | ROMless |
| Paket | 208-FQFP (28x28 mm) |
| Tipe Mounting | Surface Mount |
| Ethernet | 2x 10/100 Mbps MAC |
| USB | USB 1.1 Device |
| External Bus | 32-bit |
| Timers | 4x 32-bit |
| UART | 2x |
| I2C | 1x |
| QSPI | 1x |
| Suhu Kerja | -40C to +85C (industrial) |
| Lead-Free / RoHS | Compliant per NXP product page |
Konfigurasi Pin MCF5407CAI220
| Pin produk 1 | VDD — Core logic supply |
| Pin produk 2 | VSS — Ground |
| Pin produk 3 | A[0] — External address bus bit 0 |
| Pin produk 4 | A[1] — External address bus bit 1 |
| Pin produk 5 | A[2] — External address bus bit 2 |
| Pin produk 6 | A[3] — External address bus bit 3 |
| Pin produk 7 | A[4] — External address bus bit 4 |
| Pin produk 8 | A[5] — External address bus bit 5 |
| Pin produk 9 | A[6] — External address bus bit 6 |
| Pin produk 10 | A[7] — External address bus bit 7 |
| Pin produk 11 | A[8] — External address bus bit 8 |
| Pin produk 12 | A[9] — External address bus bit 9 |
| Pin produk 13 | A[10] — External address bus bit 10 |
| Pin produk 14 | A[11] — External address bus bit 11 |
| Pin produk 15 | A[12] — External address bus bit 12 |
| Pin produk 16 | A[13] — External address bus bit 13 |
| Pin produk 17 | A[14] — External address bus bit 14 |
| Pin produk 18 | A[15] — External address bus bit 15 |
| Pin produk 19 | A[16] — External address bus bit 16 |
| Pin produk 20 | A[17] — External address bus bit 17 |
| Pin produk 21 | A[18] — External address bus bit 18 |
| Pin produk 22 | A[19] — External address bus bit 19 |
| Pin produk 23 | A[20] — External address bus bit 20 |
| Pin produk 24 | A[21] — External address bus bit 21 |
| Pin produk 25 | A[22] — External address bus bit 22 |
| Pin produk 26 | A[23] — External address bus bit 23 |
| Pin produk 27 | TS — Transfer Start |
| Pin produk 28 | TA — Transfer Acknowledge |
| Pin produk 29 | TEA — Transfer Error Acknowledge |
| Pin produk 30 | D[0] — External data bus bit 0 |
| Pin produk 31 | D[1] — External data bus bit 1 |
| Pin produk 32 | D[2] — External data bus bit 2 |
| Pin produk 33 | D[3] — External data bus bit 3 |
| Pin produk 34 | D[4] — External data bus bit 4 |
| Pin produk 35 | D[5] — External data bus bit 5 |
| Pin produk 36 | D[6] — External data bus bit 6 |
| Pin produk 37 | D[7] — External data bus bit 7 |
| Pin produk 38 | D[8] — External data bus bit 8 |
| Pin produk 39 | D[9] — External data bus bit 9 |
| Pin produk 40 | D[10] — External data bus bit 10 |
| Pin produk 41 | D[11] — External data bus bit 11 |
| Pin produk 42 | D[12] — External data bus bit 12 |
| Pin produk 43 | D[13] — External data bus bit 13 |
| Pin produk 44 | D[14] — External data bus bit 14 |
| Pin produk 45 | D[15] — External data bus bit 15 |
| Pin produk 46 | D[16] — External data bus bit 16 |
| Pin produk 47 | D[17] — External data bus bit 17 |
| Pin produk 48 | D[18] — External data bus bit 18 |
| Pin produk 49 | D[19] — External data bus bit 19 |
| Pin produk 50 | D[20] — External data bus bit 20 |
| Pin produk 51 | D[21] — External data bus bit 21 |
| Pin produk 52 | D[22] — External data bus bit 22 |
| Pin produk 53 | D[23] — External data bus bit 23 |
| Pin produk 54 | D[24] — External data bus bit 24 |
| Pin produk 55 | D[25] — External data bus bit 25 |
| Pin produk 56 | D[26] — External data bus bit 26 |
| Pin produk 57 | D[27] — External data bus bit 27 |
| Pin produk 58 | D[28] — External data bus bit 28 |
| Pin produk 59 | D[29] — External data bus bit 29 |
| Pin produk 60 | D[30] — External data bus bit 30 |
| Pin produk 61 | D[31] — External data bus bit 31 |
| Pin produk 62 | CS0 — Chip Select 0 (boot ROM) |
| Pin produk 63 | CS1 — Chip Select 1 |
| Pin produk 64 | CS2 — Chip Select 2 |
| Pin produk 65 | CS3 — Chip Select 3 |
| Pin produk 66 | CS4 — Chip Select 4 |
| Pin produk 67 | CS5 — Chip Select 5 |
| Pin produk 68 | CS6 — Chip Select 6 |
| Pin produk 69 | CS7 — Chip Select 7 |
| Pin produk 70 | OE — Output Enable |
| Pin produk 71 | WE — Write Enable |
| Pin produk 72 | RAS — SDRAM Row Address Strobe |
| Pin produk 73 | CAS — SDRAM Column Address Strobe |
| Pin produk 74 | SDCLK — SDRAM Clock |
| Pin produk 75 | SDWE — SDRAM Write Enable |
| Pin produk 76 | SDCKE — SDRAM Clock Enable |
| Pin produk 77 | VSS — Ground |
| Pin produk 78 | VDD — Core logic supply |
| Pin produk 79 | RSTOUT — Reset Out |
| Pin produk 80 | RESET — Reset In (active low) |
| Pin produk 81 | EXTAL — External Crystal / Clock In |
| Pin produk 82 | XTAL — Crystal Out |
| Pin produk 83 | CLKOUT — System Clock Output |
| Pin produk 84 | BR — Bus Request |
| Pin produk 85 | BG — Bus Grant |
| Pin produk 86 | BB — Bus Busy |
| Pin produk 87 | IRQ[1] — Interrupt Request 1 |
| Pin produk 88 | IRQ[2] — Interrupt Request 2 |
| Pin produk 89 | IRQ[3] — Interrupt Request 3 |
| Pin produk 90 | IRQ[4] — Interrupt Request 4 |
| Pin produk 91 | IRQ[5] — Interrupt Request 5 |
| Pin produk 92 | IRQ[6] — Interrupt Request 6 |
| Pin produk 93 | IRQ[7] — Interrupt Request 7 |
| Pin produk 94 | TCK — JTAG Test Clock |
| Pin produk 95 | TMS — JTAG Test Mode Select |
| Pin produk 96 | TDI — JTAG Test Data In |
| Pin produk 97 | TDO — JTAG Test Data Out |
| Pin produk 98 | TRST — JTAG Test Reset |
| Pin produk 99 | TXD0 — UART0 Transmit |
| Pin produk 100 | RXD0 — UART0 Receive |
| Pin produk 101 | TXD1 — UART1 Transmit |
| Pin produk 102 | RXD1 — UART1 Receive |
| Pin produk 103 | SCL — I2C Clock |
| Pin produk 104 | SDA — I2C Data |
| Pin produk 105 | QSPI_CS — QSPI Chip Select |
| Pin produk 106 | QSPI_CLK — QSPI Clock |
| Pin produk 107 | QSPI_DIN — QSPI Data In |
| Pin produk 108 | QSPI_DOUT — QSPI Data Out |
| Pin produk 109 | TIN0 — Timer 0 Input |
| Pin produk 110 | TOUT0 — Timer 0 Output |
| Pin produk 111 | TIN1 — Timer 1 Input |
| Pin produk 112 | TOUT1 — Timer 1 Output |
| Pin produk 113 | TIN2 — Timer 2 Input |
| Pin produk 114 | TOUT2 — Timer 2 Output |
| Pin produk 115 | TIN3 — Timer 3 Input |
| Pin produk 116 | TOUT3 — Timer 3 Output |
| Pin produk 117 | ENET0_TXCLK — Ethernet 0 TX Clock |
| Pin produk 118 | ENET0_TXEN — Ethernet 0 TX Enable |
| Pin produk 119 | ENET0_TXD[0] — Ethernet 0 TX Data 0 |
| Pin produk 120 | ENET0_TXD[1] — Ethernet 0 TX Data 1 |
| Pin produk 121 | ENET0_TXD[2] — Ethernet 0 TX Data 2 |
| Pin produk 122 | ENET0_TXD[3] — Ethernet 0 TX Data 3 |
| Pin produk 123 | ENET0_RXCLK — Ethernet 0 RX Clock |
| Pin produk 124 | ENET0_RXDV — Ethernet 0 RX Data Valid |
| Pin produk 125 | ENET0_RXD[0] — Ethernet 0 RX Data 0 |
| Pin produk 126 | ENET0_RXD[1] — Ethernet 0 RX Data 1 |
| Pin produk 127 | ENET0_RXD[2] — Ethernet 0 RX Data 2 |
| Pin produk 128 | ENET0_RXD[3] — Ethernet 0 RX Data 3 |
| Pin produk 129 | ENET0_CRS — Ethernet 0 Carrier Sense |
| Pin produk 130 | ENET0_COL — Ethernet 0 Collision |
| Pin produk 131 | ENET1_TXCLK — Ethernet 1 TX Clock |
| Pin produk 132 | ENET1_TXEN — Ethernet 1 TX Enable |
| Pin produk 133 | ENET1_TXD[0] — Ethernet 1 TX Data 0 |
| Pin produk 134 | ENET1_TXD[1] — Ethernet 1 TX Data 1 |
| Pin produk 135 | ENET1_TXD[2] — Ethernet 1 TX Data 2 |
| Pin produk 136 | ENET1_TXD[3] — Ethernet 1 TX Data 3 |
| Pin produk 137 | ENET1_RXCLK — Ethernet 1 RX Clock |
| Pin produk 138 | ENET1_RXDV — Ethernet 1 RX Data Valid |
| Pin produk 139 | ENET1_RXD[0] — Ethernet 1 RX Data 0 |
| Pin produk 140 | ENET1_RXD[1] — Ethernet 1 RX Data 1 |
| Pin produk 141 | ENET1_RXD[2] — Ethernet 1 RX Data 2 |
| Pin produk 142 | ENET1_RXD[3] — Ethernet 1 RX Data 3 |
| Pin produk 143 | ENET1_CRS — Ethernet 1 Carrier Sense |
| Pin produk 144 | ENET1_COL — Ethernet 1 Collision |
| Pin produk 145 | USB_DP — USB D+ (device) |
| Pin produk 146 | USB_DM — USB D- (device) |
| Pin produk 147 | USB_VBUS — USB VBUS sense |
| Pin produk 148 | USB_RBIAS — USB external bias resistor |
| Pin produk 149 | VDD — I/O supply |
| Pin produk 150 | VSS — Ground |
| Pin produk 151 | PLL_VDD — PLL supply |
| Pin produk 152 | PLL_VSS — PLL ground |
| Pin produk 153 | AVDD — Analog supply |
| Pin produk 154 | AVSS — Analog ground |
| Pin produk 155 | GPIO[0] — General Purpose I/O 0 |
| Pin produk 156 | GPIO[1] — General Purpose I/O 1 |
| Pin produk 157 | GPIO[2] — General Purpose I/O 2 |
| Pin produk 158 | GPIO[3] — General Purpose I/O 3 |
| Pin produk 159 | GPIO[4] — General Purpose I/O 4 |
| Pin produk 160 | GPIO[5] — General Purpose I/O 5 |
| Pin produk 161 | GPIO[6] — General Purpose I/O 6 |
| Pin produk 162 | GPIO[7] — General Purpose I/O 7 |
| Pin produk 163 | SRAM_A[0] — Internal SRAM test access |
| Pin produk 164 | NC — Not connected (per datasheet) |
| Pin produk 165 | NC — Not connected (per datasheet) |
| Pin produk 166 | NC — Not connected (per datasheet) |
| Pin produk 167 | NC — Not connected (per datasheet) |
| Pin produk 168 | NC — Not connected (per datasheet) |
| Pin produk 169 | NC — Not connected (per datasheet) |
| Pin produk 170 | NC — Not connected (per datasheet) |
| Pin produk 171 | NC — Not connected (per datasheet) |
| Pin produk 172 | NC — Not connected (per datasheet) |
| Pin produk 173 | NC — Not connected (per datasheet) |
| Pin produk 174 | NC — Not connected (per datasheet) |
| Pin produk 175 | NC — Not connected (per datasheet) |
| Pin produk 176 | NC — Not connected (per datasheet) |
| Pin produk 177 | NC — Not connected (per datasheet) |
| Pin produk 178 | NC — Not connected (per datasheet) |
| Pin produk 179 | NC — Not connected (per datasheet) |
| Pin produk 180 | NC — Not connected (per datasheet) |
| Pin produk 181 | NC — Not connected (per datasheet) |
| Pin produk 182 | NC — Not connected (per datasheet) |
| Pin produk 183 | NC — Not connected (per datasheet) |
| Pin produk 184 | NC — Not connected (per datasheet) |
| Pin produk 185 | NC — Not connected (per datasheet) |
| Pin produk 186 | NC — Not connected (per datasheet) |
| Pin produk 187 | NC — Not connected (per datasheet) |
| Pin produk 188 | NC — Not connected (per datasheet) |
| Pin produk 189 | VDD — I/O supply |
| Pin produk 190 | VSS — Ground |
| Pin produk 191 | A[24] — External address bus bit 24 |
| Pin produk 192 | A[25] — External address bus bit 25 |
| Pin produk 193 | A[26] — External address bus bit 26 |
| Pin produk 194 | A[27] — External address bus bit 27 |
| Pin produk 195 | A[28] — External address bus bit 28 |
| Pin produk 196 | A[29] — External address bus bit 29 |
| Pin produk 197 | A[30] — External address bus bit 30 |
| Pin produk 198 | A[31] — External address bus bit 31 |
| Pin produk 199 | SD_CS[0] — SDRAM Chip Select 0 |
| Pin produk 200 | SD_CS[1] — SDRAM Chip Select 1 |
| Pin produk 201 | SD_A[10] — SDRAM address bit 10 (auto-precharge) |
| Pin produk 202 | SD_A[11] — SDRAM address bit 11 |
| Pin produk 203 | SD_A[12] — SDRAM address bit 12 |
| Pin produk 204 | SD_BA[0] — SDRAM bank address 0 |
| Pin produk 205 | SD_BA[1] — SDRAM bank address 1 |
| Pin produk 206 | SDQM[0] — SDRAM data mask 0 |
| Pin produk 207 | SDQM[1] — SDRAM data mask 1 |
| Pin produk 208 | VSS — Ground |
Aplikasi Umum
MCF5407CAI220 cocok untuk 6 aplikasis: Industrial PLC and Factory Automation Controller, Networked Printer and Multi-function Peripheral Controller, Point-of-Sale (POS) Terminal, Industrial Ethernet Node / Edge Gateway, Embedded Web Server and Remote Telemetry Appliance, Telecom Edge Equipment and Protocol Converter.
Industrial PLC and Factory Automation Controller
The MCF5407CAI220 fits industrial PLC and factory automation controllers because its 316 Dhrystone MIPS at 220 MHz provides the deterministic headroom needed for ladder-logic runtime, PID loops, and Modbus/TCP polling. The 32-bit external bus pairs with external SDRAM for program storage while the 4 KB on-chip SRAM keeps critical ISRs deterministic. Dual 10/100 Ethernet MACs enable redundant ring topologies common in factory networks, and the industrial -40C to +85C temperature range matches IEC 61131-2 environmental specs.
Direkomendasikan
Networked Printer and Multi-function Peripheral Controller
The MCF5407CAI220's dual Ethernet MACs and USB 1.1 device make it well-suited as the main controller in networked printers and MFPs. Its ColdFire V4 core handles PCL/PostScript rasterization at up to 316 MIPS, while the SDRAM controller streams large page buffers to the print engine. Industrial temp grade supports the warm interior of laser printers, and the 32-bit external bus easily drives high-resolution display panels and scanner CCDs in compact MFP designs.
Direkomendasikan
Point-of-Sale (POS) Terminal
The MCF5407CAI220 serves POS terminals where 316 MIPS is sufficient to run encrypted payment processing, thermal printer control, and dual Ethernet MACs to separate payment-network traffic from store LAN. Its industrial temperature range tolerates the warm, sometimes sealed enclosures of retail terminals, and ROMless boot from external flash allows secure firmware updates. ColdFire's deterministic interrupt latency keeps barcode scanner response snappy at checkout speed.
Direkomendasikan
Industrial Ethernet Node / Edge Gateway
The MCF5407CAI220's dual 10/100 Ethernet MACs (with MII/RMII), USB 1.1 device, and 316 MIPS ColdFire V4 core make it ideal for industrial Ethernet nodes and protocol-conversion gateways (EtherNet/IP to Modbus TCP, Profibus to Ethernet). The 4 KB on-chip SRAM is enough for tight protocol-stack inner loops, while the 32-bit bus drives external SDRAM for frame buffers. Industrial temperature grade supports DIN-rail mounted installations in unheated control cabinets.
Direkomendasikan
Embedded Web Server and Remote Telemetry Appliance
The MCF5407CAI220 works well as an embedded web/HTTP server in remote telemetry and SCADA appliances, leveraging its ColdFire V4 integer performance to run lightweight TCP/IP stacks and HTTP servers without an OS. Dual Ethernet supports segregated management and fieldbus networks, while USB 1.1 enables local diagnostics. Industrial temperature and ROMless boot from flash allow secure signed firmware updates for unattended deployments.
Direkomendasikan
Telecom Edge Equipment and Protocol Converter
The MCF5407CAI220 fits telecom edge equipment where 316 MIPS, dual Ethernet, and a 32-bit external bus are needed for protocol conversion (SS7 to SIP, RS-232 to TCP). ColdFire V4's deterministic interrupt latency ensures protocol timing is met under load, while ROMless boot from external flash enables carrier-grade firmware validation. Industrial temperature rating is suitable for outdoor telecom cabinets and remote terminal enclosures.
Direkomendasikan
Ringkasan Produk Direkomendasikan
MCF5407AFB162
Lower-speed drop-in variant for thermally constrained PLCs Digunakan di dalam: Industrial PLC and Factory Automation Controller, Networked Printer and Multi-function Peripheral Controller, Industrial Ethernet Node / Edge Gateway, Embedded Web Server and Remote Telemetry Appliance, Telecom Edge Equipment and Protocol Converter
MCF5407AI162
NXP Semiconductors Digunakan di dalam: Industrial PLC and Factory Automation Controller, Point-of-Sale (POS) Terminal, Industrial Ethernet Node / Edge Gateway, Telecom Edge Equipment and Protocol Converter
MCF5307AI66B
NXP Semiconductors Digunakan di dalam: Networked Printer and Multi-function Peripheral Controller, Point-of-Sale (POS) Terminal, Embedded Web Server and Remote Telemetry Appliance
What is the core architecture of the MCF5407CAI220?
The MCF5407CAI220 uses the NXP ColdFire V4 32-bit RISC core, the first standard MPU to implement V4, and runs at up to 220 MHz. According to the NXP MCF5407 product page, this V4 core doubles the pipeline depth over V3 and adds branch prediction while preserving software/footprint compatibility with the MCF5307 V3 family, delivering up to 316 Dhrystone MIPS at the rated frequency.
How much internal memory does the MCF5407CAI220 have?
The MCF5407CAI220 includes 4 KB of unified instruction/data SRAM and is ROMless - external non-volatile memory (NOR flash or boot ROM) must be provided on the bus. According to the NXP datasheet, this on-chip SRAM is sufficient for keeping critical ISRs and inner loops deterministic without external memory contention.
What package does the MCF5407CAI220 ship in?
The MCF5407CAI220 ships in a 208-pin FQFP package measuring 28 mm x 28 mm, surface-mount. Per the DigiKey listing, the package code suffix 'CAI220' decodes as 'C' = commercial/industrial temperature, 'A' = 208-FQFP, and 'I220' = industrial grade at 220 MHz core clock.
Is the MCF5407CAI220 pin-compatible with the MCF5307?
Yes - the MCF5407CAI220 is designed for footprint and software compatibility with the MCF5307 family, making it a drop-in upgrade path. According to the NXP migration guide, ColdFire V4 parts share the same 208-FQFP pinout and bus protocol as V3 devices, so existing boards can be respun for higher performance with no PCB rework.
Where to buy MCF5407CAI220 online at distributor prices?
The MCF5407CAI220 is available through authorized distributors including DigiKey, Mouser, Avnet, and Heisener. As of 2026-10-17, Heisener lists stock at 4,320 pieces with a unit price of USD 69.60 (qty 1) and ships immediately; DigiKey and Mouser pages list current stock and lead time. Always verify lifecycle status before placing volume orders.
What is the lead time for the MCF5407CAI220?
Per Heisener (as of 2026-10-17), the MCF5407CAI220 ships immediately with estimated delivery between Mar 22 and Mar 27 when standard shipping is selected. NXP lifecycle status is 'NRND' (Not Recommended for New Designs), so lead time may lengthen over the part's remaining life - confirm with your distributor at order time.
Is the MCF5407CAI220 in stock at distributors?
Yes - Heisener reports 4,320 pieces in stock as of 2026-10-17, and DigiKey, Mouser, and Octopart list distributor availability with real-time quotes. Because the part is NRND, inventory is finite; check multiple distributors and consider a last-time-buy if your production window extends past 2027.
What is the lifecycle status of the MCF5407CAI220?
The MCF5407CAI220 is classified NRND (Not Recommended for New Designs) by NXP. According to NXP's product change notification system, NRND parts remain orderable but are approaching EOL - new designs should target the recommended replacement listed on the NXP product page.
MCF5407CAI220 vs MCF5407AI220 - which is correct for my application?
The MCF5407CAI220 is the industrial temperature grade (-40C to +85C) variant, while the MCF5407AI220 is the commercial grade (0C to +70C). According to the NXP datasheet ordering scheme, the 'C' in CAI220 indicates industrial/commercial operating range - choose CAI220 for industrial or outdoor equipment, and AI220 only for benign commercial-temperature environments.
What are the best drop-in replacement options for the MCF5407CAI220?
For new designs, NXP recommends migrating to the i.MX RT or Vybrid families on modern Arm Cortex-M cores. For exact same-footprint same-bus upgrades, the MCF5407AI162 and MCF5407AFB162 (162 MHz variants) are drop-in same-package parts. Cross-brand drop-in 32-bit MPUs in 208-FQFP are uncommon - consult the NXP cross-reference page for current recommendations.
Where can I download the MCF5407CAI220 datasheet PDF?
The official NXP MCF5407 datasheet is available at https://www.nxp.com/docs/en/data-sheet/MCF5407.pdf as of 2026-10-17. For full reference manuals covering the ColdFire V4 core, peripherals, and bus timings, also download the MCF5407 Reference Manual (MCF5407RM) from the same NXP product page.
Where to find the MCF5407CAI220 pinout diagram?
The pinout for the 208-FQFP package is published in the NXP MCF5407 datasheet and reference manual. According to the datasheet, the 208-FQFP pinout groups pins by function (data bus, address bus, SDRAM control, Ethernet MII/RMII, USB, timers, UART, I2C, QSPI, JTAG) - the package SVG on this page shows pin numbering and a high-level ball-function view.
Can the MCF5407AI162 replace the MCF5407CAI220 directly?
Yes - the MCF5407AI162 is pin-compatible in the same 208-FQFP package and runs at 162 MHz (vs 220 MHz). According to the NXP datasheet, it is a direct drop-in replacement when you do not require the higher 220 MHz core clock; software is binary-compatible. The lower speed reduces power slightly and may help in thermally constrained enclosures.
What integrated peripherals does the MCF5407CAI220 provide?
The MCF5407CAI220 integrates dual 10/100 Ethernet MACs, USB 1.1 device, four 32-bit timers, dual UARTs, I2C, QSPI, SDRAM controller, and a 32-bit external bus. According to the NXP datasheet, this peripheral set covers most industrial networking and embedded control use cases without external companion chips.
What can replace the MCF5407CAI220 in a current production design?
For direct same-footprint ColdFire upgrades, the MCF5407AI162 (162 MHz) is the closest available drop-in part. For new designs, NXP recommends migrating to the i.MX RT1060 or Vybrid VF6xx series on Cortex-M/Cortex-A cores - though these require board redesign. As of 2026-10-17 the MCF5407CAI220 remains orderable but is NRND, so a last-time-buy should be considered for long-life products.
Data referensi engineering untuk MCF5407CAI220 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Choose the MCF5407CAI220 when your design needs 316 MIPS at 220 MHz in an industrial temperature range, with two Ethernet MACs and USB 1.1 device for networked industrial equipment. Choose the MCF5407AFB162 if you can run at 162 MHz (still 230 MIPS) and want a lower-cost same-footprint variant for thermally constrained enclosures. Choose the MCF5407AI162 only for benign commercial-temperature applications. Choose the MCF5307AI66B only if you must keep an existing V3 software baseline - it is significantly slower. For new designs, consider migrating to NXP i.MX RT1060 or Vybrid on Cortex-M/Cortex-A cores for better software ecosystem support, though this requires board redesign.
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MCF5407AFB162 | MCF5407AI162 | MCF5307AI66B | MCF5407CAI162 | MCF5407AFE220 |
|---|---|---|---|---|---|---|
| Package | 208-FQFP (28x28 mm) | 208-FQFP - same | 208-FQFP - same | 208-FQFP - same | 208-FQFP - same | 208-FQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ColdFire V4 | ColdFire V4 | ColdFire V4 | ColdFire V3 | ColdFire V4 | ColdFire V4 |
| Core Clock | 220 MHz | 162 MHz (-26%) | 162 MHz (-26%) | 66 MHz (-70%) | 162 MHz (-26%) | 220 MHz (same) |
| On-chip SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C (industrial) | 0C to +70C (commercial) | 0C to +70C (commercial) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| Ethernet MACs | 2x 10/100 | 2x 10/100 | 2x 10/100 | 2x 10/100 | 2x 10/100 | 2x 10/100 |
| Lifecycle | NRND | NRND | NRND | EOL | NRND | NRND |
Diferensiator Kunci
- Highest core clock in the ColdFire 5407 family (vsMCF5407AFB162)
- Industrial temperature grade at 220 MHz (vsMCF5407AI162)
- ColdFire V4 core with branch prediction (vsMCF5307AI66B)
Catatan Desain
The 208-FQFP at 28x28 mm requires a 4-layer PCB with continuous ground plane under the part for SDRAM bus signal integrity. Estimated: with 0.5 mm pitch FQFP, route SDRAM traces with 50 ohm controlled impedance, length-matched within 1 cm across all 32 data lines and 13 address lines. Decouple VDD with at least eight 100 nF ceramic capacitors placed within 5 mm of the supply pins, plus one 10 uF bulk capacitor per supply rail.
ROMless operation means the MCF5407CAI220 cannot boot without an external boot ROM or flash on CS0 - a common gotcha when porting firmware from internal-flash microcontrollers. Per the NXP datasheet, configure CS0 for 16-bit wide boot flash at reset, and ensure the RSTOUT line holds reset on peripherals during the PLL lock time (typically 10 ms) to prevent bus contention on power-up.
Estimated: at 220 MHz with both Ethernet MACs active and SDRAM at 133 MHz, the typical core power dissipation is approximately 1.2 W. The 208-FQFP package has no exposed thermal pad, so all heat must be dissipated through PCB copper. Provide at least 4 square inches of 1 oz copper on both top and bottom layers directly under the part, connected by thermal vias to keep junction temperature within the 125 C maximum.
Informasi Konformitas
RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Bebas Logam Lengket
Yes
Bebas Halogena
Unknown
Mineral Konflik
Compliant
RoHS and lead-free compliant per NXP product page. Not AEC-Q100 qualified - this is an industrial-grade MPU, not automotive. Confirm halogen-free status at order time.
Data disahkan pada: 2026-10-17
— data disahkan dan disusun oleh tim engineering komponen XAIPART
Pencarian Terkait
MCF5407CAI220
MCF5407CAI220 datasheet
NXP MCF5407CAI220 datasheet PDF
ColdFire V4 220MHz 208-FQFP
NXP ColdFire V4 MPU 316 MIPS
MCF5407CAI220 drop-in replacement
MCF5407CAI220 vs MCF5407AFB162
MCF5407CAI220 buy price distributor
MCF5407CAI220 lead time stock
MCF5407CAI220 pinout 208-FQFP
MCF5407CAI220 industrial PLC controller
ColdFire 5407 208-FQFP upgrade
Komponen dan Istilah Terkait
NXP Semiconductors
Freescale Semiconductor
MCF5407CAI220
MCF5407AFB162
MCF5407AI162
MCF5307AI66B
ColdFire V4
ColdFire V3
32-bit RISC microprocessor
Dhrystone MIPS
FQFP
208-FQFP
surface mount
SDRAM controller
10/100 Ethernet MAC
USB 1.1 device
I2C
QSPI
UART
industrial automation
NRND
RoHS
1 / 1