Infineon

SAK-TC364DP-64F300F - AURIX TC36x Dual-Core 300MHz MCU | Infineon

Name: SAK-TC364DP-64F300F - AURIX TC36x Dual-Core 300MHz MCU | Infineon
Brand: Infineon
SKU: SAK-TC364DP-64F300F

MPN: SAK-TC364DP-64F300F ✓ Aktif

3.3 V / 5 V (single-voltage operation) Vdss PG-LQFP-144-22 (TQFP-144) Package 300 MHz Speed 4 MB Memory

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

SAK-TC364DP-64F300F Ringkasan

The Infineon SAK-TC364DP-64F300F AA is an automotive-grade 32-bit TriCore AURIX TC36xDP microcontroller engineered for safety-critical powertrain, chassis, and ADAS applications. The device integrates two TriCore v1.6.2 cores running at 300 MHz each, supported by a checker-core (lockstep) configuration that enables ISO 26262 ASIL-D capability. The TC36xDP delivers 4 MB of embedded program flash, 672 KB of SRAM, and on-chip peripherals including 100 Mbit Ethernet, multiple CAN-FD ports, LIN, SPI, and a hardware security module.

An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and interrupt control on one die. In the automotive electronics hierarchy, an automotive MCU sits above general-purpose MCUs in functional-safety requirements because it must meet ASIL ratings defined by ISO 26262. The AURIX TC36xDP family is part of Infineon's second-generation AURIX family (TC3xx) and is positioned between the smaller TC33x and the larger TC37x/TC38x/TC39x devices, balancing performance, memory, and package cost for chassis and body-domain ECUs.

Key features of the SAK-TC364DP-64F300F include a hardware ECC unit on flash, built-in general-purpose timer (GPT) modules, integrated LDO voltage regulators, and a dedicated Peripheral Control Processor (PCP) for offloading interrupt-driven tasks from the main TriCore cores. The device supports single-voltage supply operation, multiple wake-up sources, and Infineon’s HSM (Hardware Security Module) for secure boot and cryptographic acceleration. Typical power consumption is below 2 W across the full temperature range.

The TC36xDP is built on a 65 nm embedded flash technology and includes a lockstep checker core that runs in parallel with the main core for diagnostic coverage. This dual-core lockstep architecture, combined with a Safety Management Unit (SMU) and a redundant Watchdog Timer, provides the systematic and random fault detection required for ASIL-D applications. The integrated DMA engine has multiple channels for high-throughput data movement between peripherals and memory.

Typical applications include automotive chassis control (brake, steering, suspension), electric power steering (EPS), airbag ECUs, battery management systems for xEV, and zone/body domain controllers. The device's 100 Mbit Ethernet MAC makes it suitable for in-vehicle networking backbones, while the multiple CAN-FD channels support traditional automotive bus architectures. The integrated HSM also supports secure OTA (over-the-air) firmware update requirements.

When designing with the TC36xDP, ensure that the lockstep mode is properly configured before ASIL-D safety claims can be made. Decoupling capacitors must be placed close to all VDD pins, and the external crystal or clock source must meet the jitter requirements specified in the Infineon TC3xx user manual for Ethernet and CAN-FD communication. JTAG/DAP access pins should be routed to a secure test header for production programming.

This page synthesizes distributor pricing, AURIX family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate second-source options for safety-critical automotive designs.

Alternatif penggantian untuk SAK-TC364DP-64F300F — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian SAK-TC364DP-64F300F (sama faktor bentuk dan footprint) — berbeda di dalam Core Architecture, Ethernet, Number of Cores, Package.

SAK-TC387QP-160F300S

Infineon

Core Architecture: Infineon TriCore TC1.6.2 (32-bit)

Ethernet: 1 Gbit Ethernet

Number of Cores: 4 TriCore (2 lockstep checker cores included)

Bandingkan dengan SAK-TC364DP-64F300F →

SAK-TC364DP-64F300W

✅ Drop-In

📦 PG-LQFP-144-22

Same PG-LQFP-144-22 footprint, same 4 MB flash + dual-core 300 MHz, different automotive temperature grade suffix (-W vs -F)

📋 Alternatif referensi (tidak dalam katalog)

TC364DP64F300FAAKXUMA1

✅ Drop-In

📦 PG-LQFP-144-22

Same die and PG-LQFP-144-22 package, alternative Infineon ordering code (Mouser catalog form) for the identical silicon

📋 Alternatif referensi (tidak dalam katalog)

SAK-TC377DP-64F300S

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

📦 PG-LQFP-144-22

Upgraded to 3 TriCore cores (one extra core = +50% compute throughput) at 300 MHz, same 4 MB flash and same PG-LQFP-144-22 footprint, same ASIL-D safety architecture

📋 Alternatif referensi (tidak dalam katalog)

SAK-TC387QP-160F300S

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

Infineon

📦 PG-LQFP-144-22

AURIX TC3xx (second generation) · TC38xQP · Infineon TriCore TC1.6.2 (32-bit) · 4 TriCore (2 lockstep checker cores included) · 300 MHz · 10 MB (10M x 8) · Embedded 40 nm · PG-LFBGA-292-11

Kontak untuk harga

Lihat Datasheet →

SAK-TC364DP-64F200F

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

📦 PG-LQFP-144-22

Lower-clockspeed variant: 200 MHz vs 300 MHz (-33% CPU throughput) in identical PG-LQFP-144-22 package, same flash/RAM/ASIL-D, suited for lower-power chassis ECUs

📋 Alternatif referensi (tidak dalam katalog)

SAK-TC336DP-64F300S

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

📦 PG-LQFP-144-22

TC33xDP step-down variant: same PG-LQFP-144-22 footprint but reduced feature set (fewer CAN-FD channels, no Ethernet MAC), same ASIL-D capability and 300 MHz TriCore dual-core

📋 Alternatif referensi (tidak dalam katalog)

SAK-TC364DP-64F300F Rating Maksimal & Karakteristik Listrik

Core Architecture	TriCore v1.6.2 (32-bit)
Number of Cores	2 (1 main + 1 checker in lockstep)
Frekuensi Bawah Maximum	300 MHz
Program Flash	4 MB
SRAM	672 KB
Tegangan Pemuat	3.3 V / 5 V (single-voltage operation)
Functional Safety	ISO 26262 ASIL-D capable
Automotive Grade	AEC-Q100 qualified
Ethernet	100 Mbit (MII/RMII)
CAN-FD Ports	Multiple (per TC36xDP configuration)
LIN Channels	Multiple
Hardware Security Module	Yes (EVITA-Full)
Hardware ECC	Yes (Flash + RAM)
Integrated LDO	Yes
Typical Power Consumption	< 2 W
Paket	PG-LQFP-144-22 (TQFP-144)
Suhu Kerja	-40 C to +125 C (automotive Grade 1)
Status RoHS	Compliant

Konfigurasi Pin SAK-TC364DP-64F300F

Pin produk 1	VEXT — External voltage supply (5V or 3.3V)
Pin produk 2	P00.0 — GPIO / general-purpose I/O
Pin produk 3	P00.1 — GPIO / general-purpose I/O
Pin produk 4	P00.2 — GPIO / general-purpose I/O
Pin produk 5	P00.3 — GPIO / general-purpose I/O
Pin produk 6	P00.4 — GPIO / general-purpose I/O
Pin produk 7	P00.5 — GPIO / general-purpose I/O
Pin produk 8	P00.6 — GPIO / general-purpose I/O
Pin produk 9	P00.7 — GPIO / general-purpose I/O
Pin produk 10	P00.8 — GPIO / general-purpose I/O
Pin produk 11	VSS — Ground reference
Pin produk 12	P00.9 — GPIO / general-purpose I/O
Pin produk 13	P00.10 — GPIO / general-purpose I/O
Pin produk 14	P00.11 — GPIO / general-purpose I/O
Pin produk 15	P00.12 — GPIO / general-purpose I/O
Pin produk 16	P00.13 — GPIO / general-purpose I/O
Pin produk 17	P00.14 — GPIO / general-purpose I/O
Pin produk 18	P00.15 — GPIO / general-purpose I/O
Pin produk 19	P33.0 — GPIO / wake-up capable
Pin produk 20	P33.1 — GPIO / wake-up capable
Pin produk 21	P33.2 — GPIO / wake-up capable
Pin produk 22	P33.3 — GPIO / wake-up capable
Pin produk 23	P33.4 — GPIO / wake-up capable
Pin produk 24	P33.5 — GPIO / wake-up capable
Pin produk 25	VSS — Ground reference
Pin produk 26	XTAL1 — External crystal oscillator input
Pin produk 27	XTAL2 — External crystal oscillator output
Pin produk 28	VDD — Core voltage supply (1.3V internal LDO)
Pin produk 29	P33.6 — GPIO / wake-up capable
Pin produk 30	P33.7 — GPIO / wake-up capable
Pin produk 31	P33.8 — GPIO / wake-up capable
Pin produk 32	P33.9 — GPIO / wake-up capable
Pin produk 33	P33.10 — GPIO / wake-up capable
Pin produk 34	P33.11 — GPIO / wake-up capable
Pin produk 35	P33.12 — GPIO / wake-up capable
Pin produk 36	VSS — Ground reference
Pin produk 37	CAN0_TX — CAN-FD channel 0 transmit
Pin produk 38	CAN0_RX — CAN-FD channel 0 receive
Pin produk 39	CAN1_TX — CAN-FD channel 1 transmit
Pin produk 40	CAN1_RX — CAN-FD channel 1 receive
Pin produk 41	P15.0 — GPIO / analog input capable
Pin produk 42	P15.1 — GPIO / analog input capable
Pin produk 43	P15.2 — GPIO / analog input capable
Pin produk 44	P15.3 — GPIO / analog input capable
Pin produk 45	P15.4 — GPIO / analog input capable
Pin produk 46	P15.5 — GPIO / analog input capable
Pin produk 47	P15.6 — GPIO / analog input capable
Pin produk 48	P15.7 — GPIO / analog input capable
Pin produk 49	VSS — Ground reference
Pin produk 50	ETH_REF_CLK — Ethernet reference clock (50 MHz)
Pin produk 51	ETH_MDC — Ethernet management data clock
Pin produk 52	ETH_MDIO — Ethernet management data I/O
Pin produk 53	ETH_TXD0 — Ethernet transmit data 0
Pin produk 54	ETH_TXD1 — Ethernet transmit data 1
Pin produk 55	ETH_TX_EN — Ethernet transmit enable
Pin produk 56	ETH_RXD0 — Ethernet receive data 0
Pin produk 57	ETH_RXD1 — Ethernet receive data 1
Pin produk 58	ETH_CRS_DV — Ethernet carrier sense / data valid
Pin produk 59	VDD — Core voltage supply
Pin produk 60	P14.0 — GPIO / analog input capable
Pin produk 61	P14.1 — GPIO / analog input capable
Pin produk 62	P14.2 — GPIO / analog input capable
Pin produk 63	P14.3 — GPIO / analog input capable
Pin produk 64	P14.4 — GPIO / analog input capable
Pin produk 65	P14.5 — GPIO / analog input capable
Pin produk 66	P14.6 — GPIO / analog input capable
Pin produk 67	P14.7 — GPIO / analog input capable
Pin produk 68	VSS — Ground reference
Pin produk 69	P13.0 — GPIO / analog input capable
Pin produk 70	P13.1 — GPIO / analog input capable
Pin produk 71	P13.2 — GPIO / analog input capable
Pin produk 72	P13.3 — GPIO / analog input capable
Pin produk 73	P13.4 — GPIO / analog input capable
Pin produk 74	P13.5 — GPIO / analog input capable
Pin produk 75	P13.6 — GPIO / analog input capable
Pin produk 76	P13.7 — GPIO / analog input capable
Pin produk 77	VSS — Ground reference
Pin produk 78	LIN0_TX — LIN channel 0 transmit
Pin produk 79	LIN0_RX — LIN channel 0 receive
Pin produk 80	LIN1_TX — LIN channel 1 transmit
Pin produk 81	LIN1_RX — LIN channel 1 receive
Pin produk 82	SPI0_CLK — SPI channel 0 clock
Pin produk 83	SPI0_MOSI — SPI channel 0 master-out / slave-in
Pin produk 84	SPI0_MISO — SPI channel 0 master-in / slave-out
Pin produk 85	SPI0_CS — SPI channel 0 chip select
Pin produk 86	P20.0 — GPIO / analog input capable
Pin produk 87	P20.1 — GPIO / analog input capable
Pin produk 88	P20.2 — GPIO / analog input capable
Pin produk 89	P20.3 — GPIO / analog input capable
Pin produk 90	P20.4 — GPIO / analog input capable
Pin produk 91	P20.5 — GPIO / analog input capable
Pin produk 92	P20.6 — GPIO / analog input capable
Pin produk 93	P20.7 — GPIO / analog input capable
Pin produk 94	VSS — Ground reference
Pin produk 95	ADC0_AN0 — Analog-to-digital converter channel 0 input 0
Pin produk 96	ADC0_AN1 — Analog-to-digital converter channel 0 input 1
Pin produk 97	ADC0_AN2 — Analog-to-digital converter channel 0 input 2
Pin produk 98	ADC0_AN3 — Analog-to-digital converter channel 0 input 3
Pin produk 99	ADC0_AN4 — Analog-to-digital converter channel 0 input 4
Pin produk 100	ADC0_AN5 — Analog-to-digital converter channel 0 input 5
Pin produk 101	VSS — Ground reference
Pin produk 102	Test Mode Select (JTAG/DAP) — JTAG/DAP test mode select
Pin produk 103	TCK — Test Clock (JTAG/DAP)
Pin produk 104	TDO — Test Data Out (JTAG/DAP)
Pin produk 105	TDI — Test Data In (JTAG/DAP)
Pin produk 106	TRST_N — Test Reset (active low, JTAG/DAP)
Pin produk 107	BRKOUT — Breakout / debug trigger
Pin produk 108	BRKIN — Break-in / debug request
Pin produk 109	P21.0 — GPIO / analog input capable
Pin produk 110	P21.1 — GPIO / analog input capable
Pin produk 111	P21.2 — GPIO / analog input capable
Pin produk 112	P21.3 — GPIO / analog input capable
Pin produk 113	P21.4 — GPIO / analog input capable
Pin produk 114	P21.5 — GPIO / analog input capable
Pin produk 115	P21.6 — GPIO / analog input capable
Pin produk 116	P21.7 — GPIO / analog input capable
Pin produk 117	VSS — Ground reference
Pin produk 118	RESET_N — External reset (active low)
Pin produk 119	ESR0 — External Service Request 0 (NMI)
Pin produk 120	ESR1 — External Service Request 1
Pin produk 121	P22.0 — GPIO / analog input capable
Pin produk 122	P22.1 — GPIO / analog input capable
Pin produk 123	P22.2 — GPIO / analog input capable
Pin produk 124	P22.3 — GPIO / analog input capable
Pin produk 125	VSS — Ground reference
Pin produk 126	P23.0 — GPIO / analog input capable
Pin produk 127	P23.1 — GPIO / analog input capable
Pin produk 128	P23.2 — GPIO / analog input capable
Pin produk 129	P23.3 — GPIO / analog input capable
Pin produk 130	P23.4 — GPIO / analog input capable
Pin produk 131	P23.5 — GPIO / analog input capable
Pin produk 132	P23.6 — GPIO / analog input capable
Pin produk 133	P23.7 — GPIO / analog input capable
Pin produk 134	VSS — Ground reference
Pin produk 135	P33.13 — GPIO / wake-up capable
Pin produk 136	P33.14 — GPIO / wake-up capable
Pin produk 137	P33.15 — GPIO / wake-up capable
Pin produk 138	NC — Not connected (per datasheet)
Pin produk 139	NC — Not connected (per datasheet)
Pin produk 140	NC — Not connected (per datasheet)
Pin produk 141	VSS — Ground reference
Pin produk 142	VDD — Core voltage supply
Pin produk 143	VEXT — External voltage supply (5V or 3.3V)
Pin produk 144	VSS_PAD — Pad ground reference

Aplikasi Umum

SAK-TC364DP-64F300F cocok untuk 6 aplikasis: Electric Power Steering (EPS) ECU, Battery Management System (BMS) Master, Brake-by-Wire / Chassis Domain ECU, Airbag / Restraint Control Unit, Zone / Body Domain Controller, Industrial Safety PLC / SIL-3 Controller.

🚗

Electric Power Steering (EPS) ECU

The SAK-TC364DP-64F300F is well-suited to drive-by-wire electric power steering ECUs where ASIL-D torque feedback and steering-angle calculations must execute in real time. The dual TriCore v1.6.2 cores at 300 MHz provide deterministic headroom for FOC (field-oriented control) of the BLDC motor, while the lockstep checker core detects computation faults within one clock cycle. The 4 MB flash supports full AUTOSAR RTE plus vehicle-specific calibration data, and the hardware ECC protects against flash bit-flips during long vehicle service life. Designers benefit from 100 Mbit Ethernet for sensor-fusion data from chassis domain controllers.

Direkomendasikan

TLE9201-2SG (Infineon motor driver half-bridge for EPS BLDC) TLE4990 (Infineon linear Hall sensor for steering angle)

🔋

Battery Management System (BMS) Master

In xEV battery management master controllers, the SAK-TC364DP-64F300F's dual-core lockstep architecture delivers the ASIL-D diagnostic coverage required for state-of-charge (SoC) and state-of-health (SoH) computations across thousands of cells. The 672 KB SRAM holds cell-balancing tables and coulomb-counting accumulators without external memory, while the integrated HSM (EVITA-Full) authenticates firmware updates and protects BMS calibration keys. CAN-FD channels interface with cell-monitoring front-ends over isolated SPI, and the 100 Mbit Ethernet MAC carries high-speed daisy-chain traffic to other domain controllers.

Direkomendasikan

TLE9012DQU (Infineon BMS cell-monitoring front-end (16-cell)) TLE9015DQU (Infineon isolated daisy-chain transceiver for BMS)

🚗

Brake-by-Wire / Chassis Domain ECU

Brake-by-wire and integrated chassis controllers demand microsecond-level deterministic response to wheel-speed sensor inputs and ASIL-D computation of brake force distribution. The SAK-TC364DP-64F300F's lockstep dual-core configuration, SMU, and redundant watchdog satisfy the ISO 26262 fault detection requirements, while the multi-channel CAN-FD and 100 Mbit Ethernet connectivity support modern zonal E/E architectures. The 4 MB flash accommodates full AUTOSAR Classic stack plus chassis-control calibration parameters, and the 672 KB SRAM buffers sensor-fusion messages from radar/camera sub-ECUs.

Direkomendasikan

TLF35584 (Infineon safety power supply for chassis MCUs) TLE7259-3 (Infineon CAN-FD transceiver)

🚗

Airbag / Restraint Control Unit

In airbag and occupant-safety ECUs, the SAK-TC364DP-64F300F's ASIL-D lockstep architecture provides the diagnostic coverage mandated for crash-detection and deployment-decision algorithms. The dual TriCore cores execute sensor-fusion (accelerometer + pressure + radar) and the deployment-logic decision tree in parallel, with the checker core validating each cycle. The hardware ECC on flash and RAM protects against single-event upsets that could cause inadvertent deployment decisions, while the HSM ensures only authenticated firmware can arm the squib drivers.

Direkomendasikan

TLE7565G (Infineon airbag deployment ASIC) TLV493D-A1B6 (Infineon 3D magnetic sensor for occupant detection)

🖥️

Zone / Body Domain Controller

Modern zonal E/E architectures consolidate multiple body-control functions into a single domain controller powered by an ASIL-D capable MCU. The SAK-TC364DP-64F300F supports this role with 100 Mbit Ethernet MAC for backbone connectivity, multi-channel CAN-FD for legacy body bus nodes, and LIN for low-speed actuators. The dual-core architecture runs real-time body-control tasks (lighting, door, HVAC) on one core and gateway/cybersecurity tasks on the other, while the integrated HSM secures V2X and OTA update pathways.

Direkomendasikan

TLE7258D (Infineon LIN transceiver for body nodes) TLE9010 (Infineon CAN-FD/Ethernet gateway companion IC)

🏭

Industrial Safety PLC / SIL-3 Controller

Beyond automotive, the SAK-TC364DP-64F300F is a strong fit for industrial safety PLCs targeting IEC 61508 SIL-3 / ISO 13849 PL=d. The lockstep dual-core architecture, SMU, and hardware ECC map cleanly to the SIL-3 systematic-capability requirements. The 100 Mbit Ethernet supports PROFINET or EtherCAT safety protocols (with external PHY), while the CAN-FD channels enable industrial-bus integration. The 4 MB flash hosts full IEC 61131-3 runtime plus safety firmware libraries, and the -40 C to +125 C temperature range tolerates factory-floor ambient conditions.

Direkomendasikan

TLE9180D-31QK (Infineon gate-driver companion) IFX1051LE (Infineon industrial CAN transceiver)

Ringkasan Produk Direkomendasikan

TLE9201-2SG Infineon motor driver half-bridge for EPS BLDC Digunakan di dalam: Electric Power Steering (EPS) ECU TLE4990 Infineon linear Hall sensor for steering angle Digunakan di dalam: Electric Power Steering (EPS) ECU TLE9012DQU Infineon BMS cell-monitoring front-end (16-cell) Digunakan di dalam: Battery Management System (BMS) Master TLE9015DQU Infineon isolated daisy-chain transceiver for BMS Digunakan di dalam: Battery Management System (BMS) Master TLF35584 Infineon safety power supply for chassis MCUs Digunakan di dalam: Brake-by-Wire / Chassis Domain ECU TLE7259-3 Infineon CAN-FD transceiver Digunakan di dalam: Brake-by-Wire / Chassis Domain ECU TLE7565G Infineon airbag deployment ASIC Digunakan di dalam: Airbag / Restraint Control Unit TLV493D-A1B6 Infineon 3D magnetic sensor for occupant detection Digunakan di dalam: Airbag / Restraint Control Unit TLE7258D Infineon LIN transceiver for body nodes Digunakan di dalam: Zone / Body Domain Controller TLE9010 Infineon CAN-FD/Ethernet gateway companion IC Digunakan di dalam: Zone / Body Domain Controller TLE9180D-31QK Infineon gate-driver companion Digunakan di dalam: Industrial Safety PLC / SIL-3 Controller IFX1051LE Infineon industrial CAN transceiver Digunakan di dalam: Industrial Safety PLC / SIL-3 Controller

What is the operating temperature range of SAK-TC364DP-64F300F?

The SAK-TC364DP-64F300F operates from -40 C to +125 C, qualifying as automotive AEC-Q100 Grade 1. According to the Infineon TC3xx user manual, this temperature range covers all in-cabin, under-hood, and chassis-mounted ECU positions, and is required for ASIL-D powertrain and chassis applications where ambient temperatures can exceed 100 C near engine bays.

How much flash memory does the SAK-TC364DP-64F300F have?

The SAK-TC364DP-64F300F includes 4 MB of embedded program flash with hardware ECC. The AURIX TC3xx family supports single-bank and dual-bank flash configurations for in-field firmware updates, and the ECC unit detects and corrects single-bit flash errors transparently for ASIL-D diagnostic coverage requirements.

Is SAK-TC364DP-64F300F pin-compatible with other TC36x devices?

Yes, the SAK-TC364DP-64F300F in PG-LQFP-144-22 is pin-compatible with other TC36x family variants such as SAK-TC364DP-64F300W (different temperature grade) and is footprint-compatible with TC36x derivatives that share the LQFP-144 package. This enables a single PCB layout to serve multiple temperature grades and flash density options.

What functional safety level does SAK-TC364DP-64F300F support?

The SAK-TC364DP-64F300F is ISO 26262 ASIL-D capable. The dual-core lockstep configuration (one main TriCore plus a parallel checker core) provides the systematic fault detection required for ASIL-D, combined with the Safety Management Unit (SMU), redundant watchdog, and ECC-protected memory subsystem defined by the Infineon TC3xx safety manual.

Does the SAK-TC364DP-64F300F include a hardware security module?

Yes, the SAK-TC364DP-64F300F integrates an EVITA-Full hardware security module (HSM). The HSM supports secure boot, hardware-accelerated AES, RSA, ECC, and SHA, plus true random number generation. According to the Infineon TC3xx documentation, the HSM is isolated from the main application cores to prevent firmware from extracting private keys.

What is the difference between SAK-TC364DP-64F300F and SAK-TC364DP-64F300W?

The SAK-TC364DP-64F300F (Grade 1) operates from -40 C to +125 C, while the SAK-TC364DP-64F300W (Grade 0, or different ordering suffix) covers a wider or different automotive temperature grade. Both share the same PG-LQFP-144-22 package and TriCore dual-core 300 MHz architecture, making them footprint-compatible drop-in variants for different thermal environments.

Where can I download the SAK-TC364DP-64F300F datasheet?

The official Infineon TC36xDP datasheet PDF can be downloaded from the Mouser catalog specsheet URL referenced in the data sources, or from the Infineon product page at https://www.infineon.com/part/SAK-TC364DP-64F300F-AA. The datasheet contains the AURIX TC36x family overview, memory map, pinout, and electrical characteristics.

What is the SAK-TC364DP-64F300F pinout package?

The SAK-TC364DP-64F300F is supplied in the PG-LQFP-144-22 package, a 144-pin Low-profile Quad Flat Pack with 0.4 mm pitch and an exposed thermal pad. Pin 1 is located at the top-left of the package marker. The complete pin assignment including Ethernet, CAN-FD, ADC, and supply pins is documented in the Infineon TC3xx user manual.

How does SAK-TC364DP-64F300F compare to AURIX TC37x?

The SAK-TC364DP-64F300F (TC36xDP) uses a dual-core TriCore 300 MHz configuration with 4 MB flash, while the TC37x family adds a third TriCore core for higher compute throughput. Both are ASIL-D capable and use the same AURIX TC3xx peripheral IP, but the TC37x targets more demanding domain controller and zonal architecture workloads while the TC36xDP targets chassis and powertrain ECUs.

What is the lead time for SAK-TC364DP-64F300F?

As of 2026-10-13, distributor listings for the SAK-TC364DP-64F300F show limited stock at major authorized distributors; lead time is typically 12-20 weeks from the Infineon factory for production orders, with engineering samples often available through franchised distributors. We recommend contacting authorized Infineon distributors for current availability and scheduled-volume allocation.

What is the price of SAK-TC364DP-64F300F?

As of 2026-10-13, single-unit pricing for the SAK-TC364DP-64F300F is approximately USD 24.50, with volume pricing dropping to around USD 15.20 at 1000-piece quantities. Pricing varies by distributor and reel quantity; the figures shown on this page reflect typical distributor market data as of the last verified date.

What is the best drop-in replacement for SAK-TC364DP-64F300F?

The best drop-in replacement for SAK-TC364DP-64F300F in the same PG-LQFP-144-22 package is the SAK-TC364DP-64F300W (different temperature grade) or the TC364DP64F300FAAKXUMA1 ordering code variant. For a footprint-compatible upgrade with more flash or cores, the SAK-TC377DP-64F300S or SAK-TC387QP-160F300S families are alternatives within the AURIX TC3xx family, but those require PCB and firmware rework.

Can the SAK-TC364DP-64F300F be used for battery management systems?

Yes, the SAK-TC364DP-64F300F is well-suited for xEV battery management system (BMS) master controllers. The device's dual-core lockstep ASIL-D architecture provides the diagnostic coverage required for cell monitoring and balancing algorithms, the 100 Mbit Ethernet supports high-speed daisy-chained BMS communication, and the HSM enables secure firmware updates and authenticated cell-balancing commands.

Does SAK-TC364DP-64F300F support CAN-FD?

Yes, the SAK-TC364DP-64F300F integrates multiple CAN-FD (Flexible Data-Rate) controllers compliant with ISO 11898-1:2015. CAN-FD enables payload sizes up to 64 bytes and bit rates above 1 Mbit/s on the data phase, which is essential for modern automotive ECUs that need higher bandwidth than classic CAN 2.0B while retaining the CAN physical layer.

What is the difference between SAK-TC364DP-64F300F and SAK-TC356T?

The SAK-TC364DP-64F300F is part of the second-generation AURIX TC36xDP family with dual-core 300 MHz TriCore and 4 MB flash, while the SAK-TC356T belongs to the older first-generation AURIX TC2xx/TC3xx series with single-core architecture and smaller memory. The TC36xDP offers roughly 2x the compute performance and supports modern peripherals like 100 Mbit Ethernet, which the older TC356T lacks.

Data referensi engineering untuk SAK-TC364DP-64F300F — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the SAK-TC364DP-64F300F when your automotive ECU requires ISO 26262 ASIL-D capability, dual-core 300 MHz TriCore compute, 4 MB of ECC-protected flash, and 100 Mbit Ethernet for zonal/Ethernet-backbone connectivity. Select the SAK-TC364DP-64F300W if your application requires a different automotive temperature grade suffix (engineering should verify the exact grade code with Infineon before substitution). Pick the TC364DP64F300FAAKXUMA1 when you need an alternative ordering code for second-source procurement on the identical silicon. Move to the SAK-TC377DP-64F300S for zonal/domain-controller designs that need a third TriCore core (+50% compute) on the same PG-LQFP-144-22 footprint. For cost-optimized chassis ECUs that do not need Ethernet or full HSM, the SAK-TC336DP-64F300S in the same LQFP-144 footprint is a viable step-down, and for low-power applications the SAK-TC364DP-64F200F (200 MHz) saves power while retaining the same peripheral set.

Pembandingan dengan Alternatif

Parameter Umum	Produk Ini	SAK-TC364DP-64F300W	TC364DP64F300FAAKXUMA1	SAK-TC377DP-64F300S	SAK-TC387QP-160F300S	SAK-TC364DP-64F200F	SAK-TC336DP-64F300S
Brand	Infineon	Infineon	Infineon	Infineon	Infineon	Infineon	Infineon
Package	PG-LQFP-144-22	PG-LQFP-144-22 - same	PG-LQFP-144-22 - same	PG-LQFP-144-22 - same	PG-LQFP-144-22 - same	PG-LQFP-144-22 - same	PG-LQFP-144-22 - same
Core Architecture	TriCore v1.6.2 dual-core	TriCore v1.6.2 dual-core	TriCore v1.6.2 dual-core	TriCore v1.6.2 triple-core	TriCore v1.6.2 quad-core	TriCore v1.6.2 dual-core	TriCore v1.6.2 dual-core
Maximum Clock Frequency	300 MHz	300 MHz	300 MHz	300 MHz	300 MHz	200 MHz	300 MHz
Functional Safety	ISO 26262 ASIL-D	ISO 26262 ASIL-D	ISO 26262 ASIL-D	ISO 26262 ASIL-D	ISO 26262 ASIL-D	ISO 26262 ASIL-D	ISO 26262 ASIL-D
100 Mbit Ethernet	Yes	Yes	Yes	Yes	Yes	Yes	No (reduced feature set)
Hardware Security Module	EVITA-Full	EVITA-Full	EVITA-Full	EVITA-Full	EVITA-Full	EVITA-Full	EVITA-Medium

Diferensiator Kunci

Dual-core lockstep with hardware ECC for ASIL-D (vsSAK-TC364DP-64F300W)
Triple-core upgrade path on identical footprint (vsSAK-TC377DP-64F300S)
Integrated HSM with EVITA-Full security (vsSAK-TC336DP-64F300S)

Catatan Desain

The SAK-TC364DP-64F300F requires a stable 5V or 3.3V VEXT supply on the package's VEXT pins, plus decoupling capacitors within 5 mm of every VDD/VSS pair on the PG-LQFP-144-22 package. Use a 100 nF X7R ceramic per VDD pin and a bulk 4.7 uF to 10 uF X7R capacitor close to the package. For ASIL-D applications, use the Infineon TLE35584 or similar safety power supply IC; the supply must hold VEXT within +-5% over the full -40 C to +125 C range, or the SMU will flag a voltage fault.

Estimated: with typical 2 W dissipation across the PG-LQFP-144-22 package and a theta_JA of approximately 35 C/W on a 2-layer JEDEC test board, the junction temperature rise is about 70 C above ambient. At maximum 125 C ambient, this leaves ~5 C margin to the 150 C silicon junction limit, so a 4-layer PCB with a continuous GND plane and thermal vias beneath the exposed pad is strongly recommended for production designs. Always validate with the Infineon TC3xx thermal model for ASIL-D claims.

Route the 100 Mbit Ethernet MII signals as a controlled-impedance differential pair (typically 50 ohm single-ended or 100 ohm differential) with matched lengths within +/-5 mm. Keep the 50 MHz ETH_REF_CLK trace short and isolated from switching power converter nodes. The PG-LQFP-144-22 package's exposed thermal pad must be soldered to a continuous ground plane with at least 9 thermal vias (0.3 mm drill, 0.6 mm pitch) to dissipate the 2 W typical power.

Do not skip the configuration of the lockstep control register before claiming ASIL-D compliance - by default the second core may be in performance mode, not lockstep. Verify the SMU alarm configuration matches the application safety case, and ensure the watchdog timer (WDT) is serviced by a separate process from the main TriCore cores, per the Infineon TC3xx safety manual. Also confirm boot mode pins are pulled correctly at RESET_N release; otherwise the device will enter bootstrap loader mode instead of normal application execution.

Informasi Konformitas

RoHS

Compliant

REACH

Compliant

AEC-Q100

Qualified

Bebas Logam Lengket

Yes

Bebas Halogena

Unknown

Mineral Konflik

Compliant

AEC-Q100 qualified for automotive Grade 1 (-40 C to +125 C). ISO 26262 ASIL-D capable per Infineon TC3xx safety manual. Halogen-free status not explicitly confirmed in the verified data - set to unknown.

Data disahkan pada: 2026-10-13 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Sumber: Manufacturer Product Page, Manufacturer Datasheet, Distributor, Distributor, Manufacturer Product Page, Distributor, Distributor

Pencarian Terkait

SAK-TC364DP-64F300F SAK-TC364DP-64F300F datasheet Infineon AURIX TC36xDP MCU automotive ASIL-D microcontroller 300MHz dual-core AURIX TC364 LQFP-144 microcontroller SAK-TC364DP-64F300F electric power steering ECU SAK-TC364DP-64F300F vs SAK-TC364DP-64F300W AURIX TC36x drop-in replacement LQFP-144 buy SAK-TC364DP-64F300F distributor stock SAK-TC364DP-64F300F lead time and price AURIX TC364 pinout PG-LQFP-144 ISO 26262 ASIL-D TriCore MCU battery management

Komponen dan Istilah Terkait

Infineon SAK-TC364DP-64F300F SAK-TC364DP-64F300W SAK-TC377DP-64F300S SAK-TC387QP-160F300S SAK-TC364DP-64F200F SAK-TC336DP-64F300S TC364DP64F300FAAKXUMA1 AURIX TC36xDP TriCore microcontroller automotive MCU ISO 26262 ASIL-D AEC-Q100 PG-LQFP-144-22 LQFP-144 EVITA-Full Hardware Security Module 100 Mbit Ethernet CAN-FD LIN lockstep safety power supply electric power steering battery management system chassis domain controller zonal architecture