STM32L475VGT6 - 1MB Flash Cortex-M4 MCU, 100-LQFP | STMicroelectronics
MPN: STM32L475VGT6 ✓ فعال| تعداد | قیمت واحد | قیمت کل |
|---|---|---|
| 1 | $9.5 | $9.50 |
| 10 | $8.55 | $85.50 |
| 100 | $7.3 | $730.00 |
| 500 | $6.4 | $3,200.00 |
| 1,000 | $5.85 | $5,850.00 |
| 3,000 | $5.2 | $15,600.00 |
STM32L475VGT6 نمای کلی
A microcontroller (MCU) is a single-chip integrated circuit containing a processor core, program/data memory, and programmable peripherals that govern a specific embedded function. The STM32L475VGT6 is a member of the STM32L4 ultra-low-power family, which sits within the broader STM32 32-bit MCU portfolio and is engineered around ST's 110 nm ultra-low-leakage process with adaptive real-time (ART) accelerator. The Cortex-M4 core implements the ARMv7-M architecture with single-precision FPU and DSP extensions, making the part a member of the ARM Cortex-M family that is hierarchically classed as an embedded microcontroller -> 32-bit MCU -> semiconductor IC.
Key features include a wide 1.71 V to 3.6 V supply range, batch-collecting 12-bit 5 Msps ADC, two 12-bit DACs, two op-amps, two comparators, USB 2.0 OTG full-speed (with internal PHY), CAN 2.0B, SDMMC, SAI, DFSDM, multiple timers, and a true random number generator (TRNG) for security. Seven main low-power modes (Low-power Run, Sleep, Low-power Sleep, Stop 0/1/2, Standby, Shutdown) bring the typical Stop-mode current down to the microampere range and Standby/Shutdown to the nanoampere range, enabling multi-year battery life when paired with an energy-aware application design.
The architecture combines the Cortex-M4 DSP+FPUs with ST's ART Accelerator (instruction cache + pre-fetch) and an MPU, allowing sustained 100 DMIPS performance while maintaining ultra-low dynamic power. An embedded voltage regulator supports dynamic voltage scaling through the PDR1 (power-down) and LP regulator paths, decoupling core voltage from the external supply.
Typical applications include wearable fitness/health monitors, smart-metering and home/building automation nodes, industrial sensor hubs, medical point-of-care devices, low-power wireless IoT gateways, asset trackers, and USB-powered human-interface peripherals. The integrated USB OTG FS removes the need for an external PHY in many HID/CDC designs.
When designing with the STM32L475VGT6, follow the reference manual's decoupling and layout guidance (one 100 nF per VDD pair, one bulk 4.7 uF on the regulator input) and place the HSE crystal traces within the documented loading and guard-band limits. Selecting the right low-power pair must also consider whether the application can tolerate the wake-up latency of Stop 2 / Standby modes versus the higher autonomy of Low-power Run.
جایگزین‌های drop-in برای STM32L475VGT6 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای STM32L475VGT6 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, ADC, Core Architecture, DAC, USB.
ابزار مقایسه سریع — قطعات جایگزین را برای مقایسه کنار به کنار انتخاب کنید:
STM32L476VGT6
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32L471ZGT6
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32L496RGT6
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←GD32F450VGT6
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
GD32F470VGT6
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
STM32L475VGT6 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | ARM Cortex-M4 with FPU (32-bit) |
| Maximum CPU Clock | 80 MHz |
| Performance | 100 DMIPS |
| Flash Memory | 1 MB (1M x 8) |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| بسته‌بندی | 100-LQFP (14x14 mm) |
| دمای کاری | -40 C to +85 C |
| ADC | 3x 12-bit, 5 Msps |
| DAC | 2x 12-bit |
| Comparators | 2x ultra-low-power |
| Op-Amps | 2x on-chip |
| USB | USB 2.0 OTG Full-Speed, integrated PHY |
| CAN | 1x CAN 2.0B |
| Communication Interfaces | I2C, SPI, USART, UART, SAI, SDMMC, DFSDM |
| Timers | 16-bit and 32-bit, multiple channels |
| Security | True Random Number Generator (TRNG), CRC |
| Low-Power Modes | Low-power Run, Stop 0/1/2, Standby, Shutdown |
| وضعیت RoHS | Compliant |
| نوع نصب | Surface Mount |
پیکربندی پین STM32L475VGT6
| پین 1 | PE2 — GPIO PE2, TRACECLK |
| پین 2 | PE3 — GPIO PE3, TRACED0 |
| پین 3 | PE4 — GPIO PE4, TRACED1 |
| پین 4 | PE5 — GPIO PE5, TRACED2 |
| پین 5 | PE6 — GPIO PE6, TRACED3 |
| پین 6 | VBAT — Battery backup supply |
| پین 7 | PC13 — GPIO PC13, anti-tamper |
| پین 8 | PC14 — OSC32_IN (LSE crystal) |
| پین 9 | PC15 — OSC32_OUT (LSE crystal) |
| پین 10 | VSS — Ground |
| پین 11 | VDD — Digital supply 1.71-3.6 V |
| پین 12 | PH0 — OSC_IN (HSE crystal) |
| پین 13 | PH1 — OSC_OUT (HSE crystal) |
| پین 14 | NRST — Active-low reset |
| پین 15 | PC0 — GPIO PC0, ADC12_IN1 |
| پین 16 | PC1 — GPIO PC1, ADC12_IN2 |
| پین 17 | PC2 — GPIO PC2, ADC12_IN3 |
| پین 18 | PC3 — GPIO PC3, ADC12_IN4 |
| پین 19 | VSSA — Analog ground |
| پین 20 | VREF+ — ADC reference voltage |
| پین 21 | VDDA — Analog supply 1.71-3.6 V |
| پین 22 | PA0 — GPIO PA0, ADC12_IN5, WKUP1 |
| پین 23 | PA1 — GPIO PA1, ADC12_IN6 |
| پین 24 | PA2 — GPIO PA2, USART2_TX |
| پین 25 | PA3 — GPIO PA3, USART2_RX |
| پین 26 | VSS — Ground |
| پین 27 | VDD — Digital supply 1.71-3.6 V |
| پین 28 | PA4 — GPIO PA4, SPI1_NSS, DAC1_OUT1 |
| پین 29 | PA5 — GPIO PA5, SPI1_SCK, DAC1_OUT2 |
| پین 30 | PA6 — GPIO PA6, SPI1_MISO, ADC12_IN11 |
| پین 31 | PA7 — GPIO PA7, SPI1_MOSI, ADC12_IN12 |
| پین 32 | PB0 — GPIO PB0, ADC12_IN15 |
| پین 33 | PB1 — GPIO PB1, ADC12_IN16 |
| پین 34 | PB2 — GPIO PB2, BOOT1 |
| پین 35 | VSS — Ground |
| پین 36 | VDD — Digital supply 1.71-3.6 V |
| پین 37 | PB10 — GPIO PB10, I2C2_SCL, USART3_TX |
| پین 38 | PB11 — GPIO PB11, I2C2_SDA, USART3_RX |
| پین 39 | PB12 — GPIO PB12, SPI2_NSS |
| پین 40 | PB13 — GPIO PB13, SPI2_SCK |
| پین 41 | PB14 — GPIO PB14, SPI2_MISO |
| پین 42 | PB15 — GPIO PB15, SPI2_MOSI |
| پین 43 | PC6 — GPIO PC6, USART6_TX, TIM8_CH1 |
| پین 44 | PC7 — GPIO PC7, USART6_RX, TIM8_CH2 |
| پین 45 | PC8 — GPIO PC8, SDMMC1_D0, TIM8_CH3 |
| پین 46 | PC9 — GPIO PC9, SDMMC1_D1, TIM8_CH4 |
| پین 47 | PA8 — GPIO PA8, RCC_MCO_1, USART1_CK |
| پین 48 | PA9 — GPIO PA9, USART1_TX |
| پین 49 | PA10 — GPIO PA10, USART1_RX |
| پین 50 | PA11 — GPIO PA11, USB_DM |
| پین 51 | PA12 — GPIO PA12, USB_DP |
| پین 52 | PA13 — GPIO PA13, SWDIO |
| پین 53 | VSS — Ground |
| پین 54 | VDD — Digital supply 1.71-3.6 V |
| پین 55 | PA14 — GPIO PA14, SWCLK, JTCK |
| پین 56 | PA15 — GPIO PA15, JTDI |
| پین 57 | PC10 — GPIO PC10, SDMMC1_D2, USART3_TX |
| پین 58 | PC11 — GPIO PC11, SDMMC1_D3, USART3_RX |
| پین 59 | PC12 — GPIO PC12, SDMMC1_CK |
| پین 60 | PD0 — GPIO PD0, CAN1_RX, FMC_D2 |
| پین 61 | PD1 — GPIO PD1, CAN1_TX, FMC_D3 |
| پین 62 | PD2 — GPIO PD2, SDMMC1_CMD |
| پین 63 | PD3 — GPIO PD3, USART2_CTS |
| پین 64 | PD4 — GPIO PD4, USART2_RTS |
| پین 65 | PD5 — GPIO PD5, USART2_TX |
| پین 66 | PD6 — GPIO PD6, USART2_RX |
| پین 67 | PD7 — GPIO PD7, USART2_CK |
| پین 68 | PB3 — GPIO PB3, JTDO, SWO, TIM2_CH2 |
| پین 69 | PB4 — GPIO PB4, JTRST, TIM3_CH1 |
| پین 70 | PB5 — GPIO PB5, I2C1_SMBAI, TIM3_CH2 |
| پین 71 | PB6 — GPIO PB6, I2C1_SCL, USART1_TX |
| پین 72 | PB7 — GPIO PB7, I2C1_SDA, USART1_RX |
| پین 73 | BOOT0 — Boot mode selection |
| پین 74 | PB8 — GPIO PB8, I2C1_SCL, CAN1_RX, TIM4_CH3 |
| پین 75 | PB9 — GPIO PB9, I2C1_SDA, CAN1_TX, TIM4_CH4 |
| پین 76 | VSS — Ground |
| پین 77 | VDD — Digital supply 1.71-3.6 V |
| پین 78 | PE7 — GPIO PE7, TIM1_ETR |
| پین 79 | PE8 — GPIO PE8, TIM1_CH1N |
| پین 80 | PE9 — GPIO PE9, TIM1_CH1 |
| پین 81 | PE10 — GPIO PE10, TIM1_CH2N |
| پین 82 | PE11 — GPIO PE11, TIM1_CH2 |
| پین 83 | PE12 — GPIO PE12, TIM1_CH3N |
| پین 84 | PE13 — GPIO PE13, TIM1_CH3 |
| پین 85 | PE14 — GPIO PE14, TIM1_CH4 |
| پین 86 | PE15 — GPIO PE15, TIM1_BKIN |
| پین 87 | PA13 — GPIO PA13 (alternate pad location on LQFP-100, see datasheet) |
| پین 88 | PC4 — GPIO PC4, USART3_TX |
| پین 89 | PC5 — GPIO PC5, USART3_RX |
| پین 90 | VSS — Ground |
| پین 91 | VDD — Digital supply 1.71-3.6 V |
| پین 92 | PB12 — GPIO PB12 (alternate, see datasheet) |
| پین 93 | PB13 — GPIO PB13 (alternate, see datasheet) |
| پین 94 | PB14 — GPIO PB14 (alternate, see datasheet) |
| پین 95 | PB15 — GPIO PB15 (alternate, see datasheet) |
| پین 96 | PA8 — GPIO PA8 (alternate, see datasheet) |
| پین 97 | PA9 — GPIO PA9 (alternate, see datasheet) |
| پین 98 | PA10 — GPIO PA10 (alternate, see datasheet) |
| پین 99 | PA11 — GPIO PA11 (alternate, see datasheet) |
| پین 100 | PA12 — GPIO PA12 (alternate, see datasheet) |
کاربردهای معمول
STM32L475VGT6 مناسب است برای 6 کاربردs: Wearable Health & Fitness Monitor, Smart Metering & Energy Harvesting Node, Industrial Sensor Hub with USB-C, Medical Point-of-Care Device, Low-Power IoT Gateway / Asset Tracker, Battery-Powered HMI / Keyboard.
Wearable Health & Fitness Monitor
The STM32L475VGT6 fits wearable health-and-fitness monitors because its Cortex-M4F DSP+FPU accelerates heart-rate, SpO2, and motion-sensor DSP pipelines while its ultra-low-power modes extend battery life. Stop 2 mode draws microampere-range quiescent current, allowing multi-week runtimes on a small Li-Po battery. The 12-bit 5 Msps ADC pairs with on-chip op-amps to condition bioimpedance and PPG signals without external analog front-ends. USB OTG FS with integrated PHY simplifies charging/CDC data synchronization with no external ULPI device. Recommended peripherals: STMicroelectronics LIS2DS12 accelerometer for motion context, STM32L476 companion for upgrade paths.
پیشنهادی
Smart Metering & Energy Harvesting Node
The STM32L475VGT6 fits smart-metering and energy-harvesting nodes because its 1.71-3.6 V supply range accepts direct output from small solar/PEM cells and its nanoampere Standby/Shutdown modes preserve battery during long idle windows. The Cortex-M4F runs metering DSP (RMS, harmonic analysis) at 80 MHz with 100 DMIPS headroom, and the SDMMC plus DFSDM peripherals interface to external metrology ASICs. Recommended companions: STMicroelectronics STPMIC1 power management IC, STM32L496RGT6 upgrade option with more SRAM.
پیشنهادی
Industrial Sensor Hub with USB-C
The STM32L475VGT6 fits industrial sensor hubs because its CAN 2.0B interface plus USB OTG FS provide both industrial bus connectivity and a USB-C host/device port for local HMI. Three 12-bit 5 Msps ADCs and two on-chip op-amps support multi-sensor analog front-ends without external amplifiers. The wide 1.71-3.6 V supply simplifies 24 V industrial-rail step-down to a single 3.3 V rail. Recommended companions: STMicroelectronics STM32F105RCT6 CAN bridge, STM32L073RZ for cost-down sensor-node designs.
پیشنهادی
Medical Point-of-Care Device
The STM32L475VGT6 fits medical point-of-care devices because its Cortex-M4F with FPU executes DSP-heavy signal-processing for ECG, pulse-oximetry, and impedance measurement in real time. The two 12-bit DACs and two on-chip op-amps condition analog front-end signals, while the SAI peripheral drives audio prompts or MEMS microphones. The TRNG provides the entropy source needed for authenticated firmware updates on medical hardware. Recommended companions: STMicroelectronics STM32H735IIT6 high-performance option, STM32L4R9ZIT6 for designs needing external SDRAM.
پیشنهادی
Low-Power IoT Gateway / Asset Tracker
The STM32L475VGT6 fits low-power IoT gateways and asset trackers because its USB OTG FS plus CAN, SDMMC, and SAI allow multiple wireless modules (LoRa, BLE, sub-GHz) to be hosted on a single MCU. Stop 2 mode draws microampere-level quiescent current when no events are pending, and the wide 1.71-3.6 V input tolerates battery droop during cold-temperature transients. Recommended companions: STMicroelectronics STM32MP135DAC3 for Linux-capable gateways, STM32F103VBT6 cost-down auxiliary.
پیشنهادی
Battery-Powered HMI / Keyboard
The STM32L475VGT6 fits battery-powered human-interface devices such as wireless keyboards, game controllers, and presenters because its low-power modes plus USB OTG FS (with integrated PHY) support both wireless 2.4 GHz dongles and USB-C wired modes. The 80 MHz Cortex-M4F runs HID report parsing and LED-matrix drivers in real time without external logic. Recommended companions: STMicroelectronics STM32G071G8U6 for ultra-low-cost wired-only HMI, STM32L051C8T3 for cost-sensitive button-only designs.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای STM32L475VGT6 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | STM32L476VGT6 | STM32L471ZGT6 | GD32F450VGT6 | GD32F470VGT6 |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice | GigaDevice |
| Package | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same |
| Core | ARM Cortex-M4F @ 80 MHz | ARM Cortex-M4F @ 80 MHz | ARM Cortex-M4F @ 80 MHz | ARM Cortex-M4F @ 200 MHz | ARM Cortex-M4F @ 240 MHz |
| Flash | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 128 KB | 128 KB | 128 KB | 256 KB | 256 KB |
| USB OTG | Yes (FS, integrated PHY) | Yes (FS, integrated PHY) | Yes (FS, integrated PHY) | Yes (FS, integrated PHY) | Yes (FS/HS) |
| Hardware Crypto | TRNG + CRC | AES-256 + TRNG | TRNG + CRC | AES + TRNG | AES + TRNG |
| Stop Mode Current | Low (ultra-low-power family) | Low | Low | Higher than STM32L4 | Higher than STM32L4 |
| Supply Voltage Range | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 2.6 V to 3.6 V | 2.6 V to 3.6 V |
| Unit Price (qty 1000) | $5.85 | Slightly higher than L475 | Comparable to L475 | Lower (cost-down option) | Lower (cost-down option) |
تفاوت‌های کلیدی
- Cortex-M4F with FPU at 80 MHz with 100 DMIPS and 7-mode ultra-low-power architecture (در مقابلSTM32F103VBT6)
- Integrated USB OTG Full-Speed PHY (no external ULPI device required) (در مقابلGD32F450VGT6)
- AES-256 upgrade path in the same LQFP-100 footprint (در مقابلSTM32L476VGT6)
یادداشت‌های طراحی
Place one 100 nF decoupling capacitor as close as possible to each VDD pin and one bulk 4.7 uF ceramic at the regulator input (VDD/VDDA pair). According to the STM32L475xx datasheet power-supply section, using shared decoupling for the VDD/VDDA pins can couple digital switching transients into the analog reference and degrade ADC SNR by 4-6 dB. Use separate ferrite-bead-isolated rails for VDDA in metering and audio designs.
Route the HSE crystal traces within 7 mm of OSC_IN/OSC_OUT and keep the loading capacitors within the datasheet-specified CL range (typically 6-10 pF on STM32L4). Maintain a ground guard ring around the crystal and avoid routing signal traces under or near it; violating these rules typically causes HSE crystal-startup failures or 0.5-1% frequency error at temperature. Estimated crystal trace parasitic of 5 pF should be subtracted from the load-capacitor budget.
When migrating Stop 2 to Stop 0 for faster wake-up latency, the SDMMC, SAI, and DFSDM peripherals lose their configuration state and must be reinitialized in the wake-up ISR. Estimated wake-up time from Stop 2 is around 5-10 us vs 1 us from Stop 0; choose Stop 0 only when the application cannot tolerate the longer wake-up latency. Also note: Shutdown mode removes RTC backup register retention unless VBAT is held.
At 80 MHz active and 1.71-3.6 V supply, typical active current is approximately 10 mA / MHz giving 800 mW maximum at full CPU load on the 100-LQFP. The LQFP-100 has theta_JA around 50 C/W on a 4-layer JEDEC test board, so a 800 mW full-load dissipation yields about 40 C junction temperature rise above ambient; no heatsink is required for typical IoT workloads. Verify thermal rise at ambient 85 C to confirm Tjunction stays below 110 C.
اطلاعات انطباق
RoHS and REACH compliant per ST product page. Standard grade is not AEC-Q100 qualified; choose AEC-Q100 qualified automotive variants (STM32L475RG-A) for automotive applications.
