XC7Z030-L2FBG484I - 800MHz Zynq SoC FPGA | AMD
MPN: XC7Z030-L2FBG484I ✓ AktifXC7Z030-L2FBG484I Ringkasan
A Zynq-7000 SoC is a heterogeneous system-on-chip that places a dual-core Arm Cortex-A9 processing subsystem and programmable FPGA fabric in one package. The processor system executes operating-system-level software, while the programmable logic implements parallel datapaths, custom interfaces, accelerators, and fixed-function hardware. This integration belongs to the FPGA and SoC hierarchy and reduces component count compared with separate processors and logic devices.
The XC7Z030-L2FBG484I provides 125,000 logic cells and an 800 MHz Cortex-A9 operating frequency. The -2 designation identifies a particular device speed grade, while FBG484 identifies the 484-ball FCBGA package. The industrial-temperature I suffix and the exact package, pin, voltage, and timing requirements must be considered when replacing an existing design or selecting a new board configuration.
Technically, the device integrates the ARM Cortex-A9 MPCore processing system with CoreSight debug capabilities and Kintex-7 FPGA logic. This architecture permits software-controlled hardware behavior and allows time-critical functions to execute in programmable logic. The published operating-temperature information for this exact MPN spans -40 °C to +100 °C, while the associated product data identifies a 1.05 V maximum supply-voltage classification.
Typical uses include industrial image processing, embedded control, network-interface acceleration, sensor fusion, programmable logic subsystems, and mixed software/hardware data-processing platforms. The dual-core processor is suitable for supervisory and application software, while the FPGA fabric can accelerate parallel algorithms or provide deterministic interfaces that would be inefficient in a general-purpose processor alone.
Design planning should begin with the official package placement diagram and pinout files for XC7Z30-FBG484. Check every power rail, configuration pin, clock input, memory interface, and dedicated I/O against the target board because the 484-ball FCBGA footprint supports dense connections but requires careful escape routing, thermal management, and high-speed layout discipline.
This page combines the exact XC7Z030-L2FBG484I device identification, verified product specifications, same-package replacement options, application guidance, and package-level design considerations to support engineering selection and board-level implementation planning.
Alternatif penggantian untuk XC7Z030-L2FBG484I — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC7Z030-L2FBG484I (sama faktor bentuk dan footprint) — berbeda di dalam Logic Cells, Package, Device Type, Speed Grade, Mounting Type.
XC7Z030-2FBG484I
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC7Z030-1FBG484I
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC7Z030-2FBG484C
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC7Z030-1FBG484C
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →XC7Z030-2FBG484E
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →XC7Z030-L2FBG484I Rating Maksimal & Karakteristik Listrik
| Device Type | Zynq-7000 Kintex-7 FPGA system-on-chip |
| Processor Core | Dual Arm Cortex-A9 MPCore |
| Processor Operating Frequency | 800 MHz |
| Logic Cells | 125,000 cells |
| Programmable Logic Family | Kintex-7 |
| Architecture | Heterogeneous ARM processor and FPGA SoC |
| Debug Support | CoreSight |
| Technology | 28 nm |
| Maximum Supply Voltage | 1.05 V |
| Suhu Kerja | -40 °C to +100 °C |
| Package Type | 484-pin FCBGA |
| Package Dimensions | 23 mm x 23 mm |
| Device Speed Grade | -2 |
| Temperature Grade Suffix | I |
| Tipe Mounting | Surface mount |
| Packaging Form | Tray |
| Embedded Memory Capacity | 256 KB |
| Status RoHS | Compliant |
| Jumlah Pin | 484 balls |
XC7Z030-L2FBG484I 23 mm x 23 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC7Z030-L2FBG484I (23 mm x 23 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC7Z030-L2FBG484I.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC7Z030-L2FBG484I cocok untuk 6 aplikasis: Industrial Machine Vision, Network Packet Acceleration, Embedded Sensor Fusion, Programmable Logic Control, Data Acquisition and Signal Processing, Secure Communications Gateway.
Industrial Machine Vision
The XC7Z030-L2FBG484I fits industrial machine-vision systems that need flexible sensor timing and parallel image processing. Its dual Arm Cortex-A9 MPCore processors at 800 MHz can manage control software, configuration, and communication, while the 125,000-cell Kintex-7 fabric can accelerate pixel pipelines, thresholding, filtering, or camera-interface logic. The -40 °C to +100 °C listed operating range supports industrial environments where temperature variation is expected. Keep high-speed memory and image-sensor interfaces within the device's published timing constraints, and use the package placement diagram when assigning all 484 BGA connections.
Direkomendasikan
Network Packet Acceleration
The XC7Z030-L2FBG484I is suitable for network equipment that divides control-plane software between the dual Cortex-A9 cores and data-plane processing between programmable-logic blocks. The 125,000 logic cells can implement parallel classification, filtering, queuing, or protocol functions where deterministic throughput is more important than sequential software execution. Its listed 800 MHz processor frequency supports network-control applications, while CoreSight provides integrated processor debug capability. Power estimation and high-speed memory-interface implementation must be based on the actual switching activity, clock rates, and I/O loading of the final design.
Direkomendasikan
Embedded Sensor Fusion
The XC7Z030-L2FBG484I supports embedded sensor-fusion designs that combine control software with hardware-assisted signal processing. The Arm Cortex-A9 subsystem can execute configuration, calibration, and supervisory algorithms, while the Kintex-7 fabric can implement fixed-latency filtering, interpolation, or parallel data alignment. Its 125,000 logic cells provide meaningful parallel-processing capacity without requiring the same amount of sequential code as a processor-only implementation. The industrial I temperature classification is relevant to deployed systems expected to operate from -40 °C to +100 °C, subject to correct power regulation, thermal design, and qualification of the assembled board.
Direkomendasikan
Programmable Logic Control
The XC7Z030-L2FBG484I fits control systems requiring software flexibility alongside hardware-level timing control. The dual 800 MHz Arm Cortex-A9 cores can execute real-time operating-system software, state logic, diagnostics, and communications, while the Kintex-7 fabric can service deterministic timing or peripheral-control tasks. This division of labor can reduce the burden on sequential software for workloads with many parallel operations. The -2 speed grade and industrial suffix should be selected only after checking the timing margin of the -1 alternative and confirming the required temperature range. PCB implementation requires careful BGA escape routing, decoupling, clock distribution, and power sequencing.
Direkomendasikan
Data Acquisition and Signal Processing
The XC7Z030-L2FBG484I is useful in data-acquisition systems where sensor streams must be collected, conditioned, and processed under software control. The FPGA fabric can implement parallel ADC interfaces, digital filtering, correlation, or buffering, while the dual Cortex-A9 processors perform calibration, configuration, analysis, and data transfer. Its combination of 125,000 logic cells and an 800 MHz ARM processing subsystem supports a clear hardware/software partition in compact embedded platforms. Designers should use the manufacturer power data with the actual converter count, sample rate, memory traffic, and logic utilization, since conversion and accelerator activity materially affect the thermal and power budget.
Direkomendasikan
Secure Communications Gateway
The XC7Z030-L2FBG484I can support a communications gateway that combines a software-controlled protocol stack with FPGA-based packet handling or cryptographic acceleration. The dual Arm Cortex-A9 cores are suited to networking stacks and management functions, while the 125,000-cell logic fabric can accelerate parallel data movement or hardware-assisted security operations. CoreSight assists with processor-level debugging, and the industrial temperature grade covers the listed -40 °C to +100 °C operating range. Production use requires careful partitioning of fixed and programmable functions, review of the device's security capabilities, validation of memory interfaces, and testing of the complete power and thermal design across worst-case traffic loads.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC7Z030-L2FBG484I — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC7Z030-2FBG484I | XC7Z030-1FBG484I | XC7Z030-2FBG484C | XC7Z030-1FBG484C | XC7Z030-2FBG484E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-484 | FCBGA-484 | FCBGA-484 | FCBGA-484 | FCBGA-484 | FCBGA-484 |
| Device Family | Zynq-7000 SoC | Zynq-7000 SoC | Zynq-7000 SoC | Zynq-7000 SoC | Zynq-7000 SoC | Zynq-7000 SoC |
| Speed Grade | -2 | -2 | -1 | -2 | -1 | -2 |
| Temperature Suffix | I | I | I | C | C | E |
| Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
Diferensiator Kunci
- Combines programmable logic and dual-core processor control in one SoC (vsXC7A50T-L2FGG484E)
- Higher performance grade within the same FBG484 footprint (vsXC7Z030-1FBG484I)
- Exact industrial suffix alignment (vsXC7Z030-2FBG484C)
- Pin-compatible capacity to consolidate processor and logic functions (vsXC7Z030-2FBG484I)
Catatan Desain
Use the official XC7Z30-FBG484 package placement diagram and package-device pinout files before releasing PCB artwork. Verify all 484 BGA assignments, including power, ground, configuration, clocks, memory interfaces, and dedicated I/O. Place decoupling and power-plane structures according to the AMD power guidelines, and preserve escape-routing access for every power ball because a BGA footprint offers little room for via redirection.
Do not assign a single supply-current value to the XC7Z030-L2FBG484I. Estimate the processor, FPGA fabric, memory-interface, and I/O loads separately using the AMD power-estimation flow. The listed 1.05 V maximum supply-voltage classification identifies the supply class but does not establish the full design current. Include startup transients, power-supply tolerance, sequencing, and worst-case logic activity when sizing regulators and the board's power distribution network.
Estimate junction temperature from actual FPGA utilization, processor activity, I/O toggling, ambient conditions, and the exposed-area thermal path available on the assembled board. Do not rely on a generic package thermal figure because FCBGA performance depends strongly on PCB copper, via structure, enclosure conditions, and neighboring heat sources. Validate the worst-case operating mode with thermal simulation and board-level measurements before defining the system's maximum ambient temperature.
Review each high-speed memory and serial interface against the selected device speed grade and board topology. A move from -2 to -1 can affect timing margin even when the package is unchanged, while changing only the temperature suffix can alter the valid environmental envelope. Use source-synchronous routing rules, length matching, reference planes, and the manufacturer's interface constraints, then complete post-route timing and signal-integrity sign-off.
Do not treat similar XC7Z030 ordering codes as unconditional substitutions. The speed suffix, temperature suffix, package, package revision, and lifecycle requirements must all be checked. In particular, FBG484, FFG676, SBG485, and other package codes cannot replace one another without a PCB redesign, even though the listed processor frequency and logic capacity may be identical.
Informasi Konformitas
RoHS compliance is identified for the exact MPN. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals information was not established for this ordering code.