DRV8886PWPR vs DRV8434ARGER 比較

詳細な並列比較: DRV8886PWPR メーカー: Texas Instruments および DRV8434ARGER メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ 生産中
Texas Instruments
DRV8434ARGER DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER ✓ 生産中

仕様比較

パラメータ DRV8886PWPR DRV8434ARGER
ブランド Texas Instruments Texas Instruments
カテゴリ Motor Drivers Motor Drivers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $1.52 $2.65
Motor Type Bipolar stepper (2-phase) Bipolar stepper
Number of Full H-Bridges 2 —
Operating Supply Voltage (VM) 8 V to 37 V —
Absolute Maximum VM 40 V —
Full-Scale Output Current (per phase) 2 A —
RMS Output Current 1.4 A (24 V, TA = 25 C, PCB-dependent) 1.5 A per phase (typical)
Peak Output Current 3 A —
HS + LS On-Resistance (RDSon) 550 mOhm —
Microstepping Levels Up to 1/16 step —
Control Interface STEP / DIR Step/Direction + SPI
Current Sensing Internal (no external sense resistor) Integrated (no external sense resistor)
Decay Modes 8 configurable modes including Smart Tune —
PWM Chopping Frequency Up to 50 kHz —
Sleep Current 20 uA (typical) —
Logic Supply Voltage (VINT) 3 V to 5.5 V —
動作温度範囲 -40 C to +125 C —
パッケージ HTSSOP-24 (PWP) with PowerPAD VQFN-24 (RGE) 4x4 mm with thermal pad
実装タイプ Surface Mount Surface Mount
Protection Features UVLO, OCP, TSD, open-load detect, charge-pump UV UVLO, OCP, OVP, OTP, open load, stall
Fault Output nFAULT (active-low, open-drain) —
AEC-Q100 Qualified No (use DRV8886ATPWP for automotive) —
RoHS ステータス Compliant Compliant
Number of H-Bridges — 2
出力構成 — NMOS H-bridge
Supply Voltage (VM) — 4.5 V to 48 V
Full-Scale Output Current — 2.5 A per phase (peak)
Microstepping Resolution — Full-step to 1/256 step
Stall Detection — Yes (GPIO output)
Decay Mode — Smart Tune (mixed decay)
Sleep Pin — Yes (nSLEEP, active low)
Fault Pin — Yes (nFAULT, active low, open-drain)
動作温度 — -40 C to +125 C
MSLレベル — 2 (1 year floor life)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼