EPC1L20 vs EPC1LI20 比較

詳細な並列比較: EPC1L20 メーカー: Altera および EPC1LI20 メーカー: Altera。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ EPC1L20 EPC1LI20
ブランド Altera Altera
カテゴリ Memory ICs Memory ICs
ライフサイクル状態 有効 Obsolete
在庫状況 In Stock In Stock
単価(USD) $3.75 $8.50
メモリタイプ OTP Configuration PROM (Flash) OTP Configuration PROM (EPROM-based)
メモリサイズ 1 Mbit 1 Mb (1,048,576 bits)
Configuration Clock (max) 8 MHz —
Flash Access Time 90 ns (approx.) —
Max Read Bandwidth 160 Mbps (16-bit DQ bus) —
インターフェース Serial / FPP configuration + JTAG (IEEE 1149.1) —
電源電圧 3.3 V (typical) —
Programmability One-Time Programmable (OTP) —
パッケージ 20-pin PLCC (9x9 mm) 20-pin PLCC (J-lead, 9x9 mm)
実装タイプ Through-Hole / Socket Surface Mount (PLCC socket compatible)
動作温度 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
JTAG / ISP Support Yes (IEEE 1149.1) —
Compatible FPGA Series Stratix, Cyclone, APEX, FLEX, ACEX, LUT-based families —
RoHS ステータス [DATA_NEEDED: RoHS compliance] [DATA_NEEDED: RoHS status - original Altera part may be non-RoHS SnPb finish]
Lead-Free [DATA_NEEDED: lead-free status] —
Configuration Interface — Altera Passive Serial / Altera Active Serial / JTAG (IEEE 1149.1)
Maximum Configuration Clock — 8 MHz
Supply Voltage (VCC) — 5.0 V (4.75 V to 5.25 V)
Programming Voltage (VPP) — 12.75 V (typical, factory-programmed via JTAG)
ピン数 — 20
Cascading Support — Yes (nCASC pin for multi-device daisy chain)
Endurance — OTP (one-time programmable, 1000 erase-equivalent UV cycles for pre-program erase)
JTAG Programming — Yes (in-system via IEEE 1149.1)
Compatible FPGA Families — FLEX 8000, FLEX 10K, ACEX 1K, APEX 20K, Mercury
MSLレベル — 1 (per Partstack datasheet record)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼