Texas Instruments

ADS7842E/1K - 12-Bit 4-Channel 200ksps ADC | Texas Instruments

部品番号: ADS7842E/1K ✓ 生産中
2.7 V to 5 V Vdss 28-pin SSOP (DB) Package
MOQ: 1 |

ADS7842E/1K 概要

Texas Instruments ADS7842E/1K is a 12-bit, 4-channel successive-approximation-register analog-to-digital converter with a 200 ksample/s conversion rate, parallel output interface, and 28-pin SSOP package. It operates from a single 2.7 V to 5 V supply and offers an adjustable 100 mV to VCC reference range. The integrated four-channel analog multiplexer, sample-and-hold amplifier, and three-state parallel outputs make the ADS7842 a complete converter for microprocessor-controlled measurement systems.

An ADC converts an analog input voltage into a digital value suitable for processing, measurement, logging, or control. The ADS7842 belongs to the SAR ADC family, where an internal capacitor-based DAC and successive comparison determine each conversion result. Within the electronics hierarchy, it is a data-converter IC and an ADC/DAC category component designed for precision analog-signal capture. Its four-input multiplexer supports multiple sensors or measurement nodes without requiring four separate converter packages.

Key features include 12-bit resolution, a maximum sampling rate of 200 ksample/s, ±1 LSB integral and differential nonlinearity, and 72 dB SINAD. The single-supply operating range of 2.7 V to 5 V supports both 3.3 V and 5 V systems. An adjustable reference from 100 mV to VCC changes the full-scale input range and corresponding LSB resolution from 24 µV to 1.22 mV. Low power dissipation of 2 mW helps reduce system energy consumption in portable and battery-operated instruments.

The device combines a four-channel analog multiplexer, sample-and-hold amplifier, 12-bit SAR core, control logic, and three-state parallel output drivers. Parallel data output permits direct connection to appropriately buffered microprocessor or data-bus circuitry. The three-state outputs can place the bus in a high-impedance state when the converter is not selected. At 200 ksample/s, the architecture provides sufficient throughput for moderate-rate instrumentation while retaining the simple control and conversion behavior associated with SAR ADCs.

Typical uses include portable data loggers, test and measurement equipment, industrial process monitoring, battery-powered instruments, and laboratory data-acquisition systems. It is particularly useful when several analog channels must be sampled with a compact parallel-interface converter. The 200 ksample/s rate supports rapidly changing sensor signals, while the 12-bit result provides 4096 digital codes across the selected reference range.

PCB design should provide a low-impedance reference network and short analog traces to minimize acquisition errors and coupling. Decoupling capacitors should be placed close to the supply and reference pins, and digital output routing should avoid crossing sensitive input paths. Because the converter uses an adjustable reference, resistor and capacitor tolerances directly influence LSB size and calibration accuracy.

This product page combines the manufacturer specifications with practical application guidance, package details, replacement considerations, interface constraints, and PCB design notes. These engineering details help designers determine whether the ADS7842E/1K’s 12-bit resolution, four-channel multiplexing, 200 ksample/s throughput, parallel bus, and 2.7 V to 5 V supply range fit a specific data-acquisition design.

ドロップイン代替品: ADS7842E/1K — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ADS7842E/1K (同一形状・フットプリント) — 相違点: Differential Nonlinearity, Digital Interface, Integral Nonlinearity, Operating Temperature Range, Power Dissipation.

Texas Instruments
Digital Interface: 12-bit parallel microprocessor interface with 3-state outputs
Texas Instruments
Power Dissipation: 2 mW (typical at rated throughput)
Texas Instruments
Differential Nonlinearity: ±1 LSB maximum
Integral Nonlinearity: ±1 LSB maximum
Operating Temperature Range: -40°C to +85°C

ADS7842EB/1KG4

✅ ドロップイン
📦 28-pin SSOP (DB)
The principal 12-bit, 4-channel, 200 ksample/s, and parallel-interface ratings match exactly, giving a 0% difference in those key parameters.

📋 参考代替品(カタログ未掲載)

ADS7842E/1KG4

✅ ドロップイン
Texas Instruments
📦 28-pin SSOP (DB)
12 bit · 4 single-ended · SAR (Successive Approximation Register) · 200 kSPS (maximum) · Single-ended analog · 0.0488% (1 LSB) · Parallel, 3-state · External, 3 V or 5 V typical

価格はお問い合わせください

データシートを見る →

ADS7842E

✅ ドロップイン
Texas Instruments
📦 28-pin SSOP (DB)
12 bit · 4 channels · 1 successive-approximation-register (SAR) converter · 200 kHz · 2.7 V to 5 V · 2 mW · ±1 LSB · ±1 LSB

価格はお問い合わせください

データシートを見る →

ADS7842EB

✅ ドロップイン
Texas Instruments
📦 28-pin SSOP (DB)
Successive-approximation sampling ADC · 12 bit · 4 channels · 200 kSPS · 12-bit parallel output · ±1 LSB maximum · ±1 LSB maximum · No missing codes

価格はお問い合わせください

データシートを見る →

ADS7842E/1K 最大定格&電気的特性

分解能 12 bit
Number of Input Channels 4 channels
Architecture Successive Approximation Register (SAR)
サンプリングレート 200 ksample/s
Supply Voltage Range 2.7 V to 5 V
Reference Voltage Range 100 mV to VCC
LSB Resolution 24 µV to 1.22 mV
Integral Nonlinearity ±1 LSB
Differential Nonlinearity ±1 LSB
Signal-to-Noise and Distortion 72 dB SINAD
Power Dissipation 2 mW
Digital Interface 12-bit parallel output
Output Driver Type Three-state output
Analog Front End 4-channel multiplexer with sample-and-hold amplifier
動作温度範囲 -40 °C to +85 °C
パッケージ 28-pin SSOP (DB)
実装タイプ Surface mount
RoHS Compliance unknown
REACH Compliance unknown

ADS7842E/1K 28-pin ssop (db) ピン配置ガイド

ADS7842E/1K (28-pin ssop (db) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

ADS7842E/1K の 28-pin ssop (db) パッケージピン配置図

詳細なピン配置データはありません: ADS7842E/1K.

詳細は データシート をご参照ください。

主な用途

ADS7842E/1K の用途: 6 件s: Portable Multi-Channel Data Logging, Industrial Process Monitoring, Test and Measurement Instrumentation, Battery-Powered Sensor Acquisition, Laboratory Data Acquisition, Embedded Control Signal Conditioning.

📱

Portable Multi-Channel Data Logging

The ADS7842E/1K fits portable data loggers that must capture several sensor channels with low power and moderate conversion speed. Its four-channel multiplexer avoids four separate ADC packages, while 12-bit resolution provides 4096 codes across the selected reference range. The 200 ksample/s conversion rate supports changing inputs without imposing a lengthy pipeline delay. At 2 mW power dissipation and a 2.7 V minimum supply voltage, the device is suitable for battery-oriented measurement systems. Designers should match input ranges to the adjustable 100 mV-to-VCC reference and account for 24 µV to 1.22 mV LSB resolution.

🏭

Industrial Process Monitoring

The ADS7842E/1K supports industrial process-monitoring systems that combine several low-bandwidth sensors with a controller or data-acquisition module. Its four analog inputs can sample pressure, temperature, level, or position signals sequentially, while the 200 ksample/s SAR conversion rate provides responsive updates. A 2.7 V to 5 V operating range accommodates embedded control hardware, and the 12-bit result provides sufficient resolution for many supervisory measurements. The adjustable reference supports signal scaling, although a stable reference network and protected analog front end are important when field inputs experience noise or large transients.

🔧

Test and Measurement Instrumentation

The ADS7842E/1K is appropriate for bench instruments and portable test equipment that acquire up to four analog inputs through a parallel interface. Its 12-bit SAR architecture delivers predictable successive-approximation conversion behavior, and the 200 ksample/s rate is suitable for many general-purpose measurement channels. The three-state parallel outputs allow bus-oriented connection to suitable control logic, while the 28-pin SSOP package supports compact instrument layouts. Designers should use the manufacturer timing information to establish conversion and data-read cycles, particularly when multiplexing rapidly changing sources or using the lowest reference voltages.

🔋

Battery-Powered Sensor Acquisition

The ADS7842E/1K fits battery-powered sensor acquisition when several analog inputs must share a compact converter and power budget is limited. Its four-channel input multiplexer reduces component count, while 2 mW power dissipation and operation from 2.7 V support low-energy designs. The 12-bit conversion result is suitable for temperature, position, light, and other slowly changing environmental measurements. For duty-cycled logging, the system can control acquisition and reduce activity between samples. Input protection, reference stability, and calibration become important because battery voltage variation and sensor tolerances can otherwise dominate the converter’s ±1 LSB nonlinearity.

🖥️

Laboratory Data Acquisition

The ADS7842E/1K can serve as the acquisition front end in a laboratory data-acquisition system using a microprocessor, FPGA, or parallel bus controller. Four multiplexed analog inputs, 12-bit resolution, and a 200 ksample/s maximum sampling rate cover routine voltage measurements and signal characterization. The parallel output reduces serial-interface overhead when samples must be transferred quickly. For bench accuracy, use a quiet, stable reference and keep analog routing compact. The converter’s 100 mV-to-VCC reference flexibility lets engineers select full-scale ranges appropriate for small sensor outputs, subject to the associated 24 µV minimum LSB step.

⚙️

Embedded Control Signal Conditioning

The ADS7842E/1K is suitable for embedded control boards that must convert four analog sensor or actuator-feedback signals into digital values for a processor. Its single 2.7 V-to-5 V supply operation aligns with common embedded logic rails, and the three-state parallel outputs support connection to bus-compatible controller circuitry. The SAR conversion process and 200 ksample/s rate are adequate for feedback monitoring in many non-safety-critical control loops. Firmware must avoid changing the selected channel during an incomplete conversion, and analog input filtering should prevent out-of-band noise from folding into the selected measurement range.

What is the ADS7842E/1K?
The ADS7842E/1K is a Texas Instruments 12-bit, 4-channel SAR analog-to-digital converter that operates up to 200 ksample/s from a single 2.7 V to 5 V supply. According to the manufacturer product page, it combines a four-channel multiplexer, sample-and-hold amplifier, parallel output interface, and three-state output drivers in a 28-pin SSOP package.
What is the conversion speed of ADS7842E/1K?
The ADS7842E/1K has a maximum conversion rate of 200 ksample/s. According to the Texas Instruments ADS7842 product information, this throughput is suitable for portable data loggers, measurement equipment, and other systems that must sample several analog inputs using a successive-approximation conversion process.
What is the supply voltage range of ADS7842E/1K?
The ADS7842E/1K operates from 2.7 V to 5 V. The Texas Instruments product page identifies it as a single-supply converter, making the device suitable for 3.3 V and 5 V embedded systems. The analog reference can also be adjusted from 100 mV to VCC to set the converter’s full-scale measurement range.
How many analog input channels does ADS7842E/1K have?
The ADS7842E/1K includes a four-channel analog multiplexer. According to Texas Instruments, this allows one ADC core to sample four inputs sequentially rather than requiring four separate converter packages. The device also includes a sample-and-hold amplifier for each selected acquisition path.
Where can I download the ADS7842E/1K datasheet PDF?
The official ADS7842E/1K product and datasheet information is available from Texas Instruments at the manufacturer product-details page. Use the datasheet link on that page for the electrical characteristics, pin configuration, application information, and operating limits. The product page identifies the device as a 28-pin SSOP, 12-bit, four-channel sampling ADC.
Where is the ADS7842E/1K pinout?
The ADS7842E/1K pinout is shown in the Texas Instruments ADS7842 datasheet under the pin configuration and pin-description tables. The converter uses a 28-pin SSOP package, with the exposed interface organized around power, ground, analog input, reference, control, and 12-bit parallel output functions. Use the manufacturer pin table when assigning PCB nets.
What are the key specifications of ADS7842E/1K that engineers should know?
The principal ADS7842E/1K specifications are 12-bit resolution, four analog input channels, a 200 ksample/s conversion rate, and a 2.7 V to 5 V supply range. Texas Instruments also specifies ±1 LSB INL and DNL, 72 dB SINAD, 2 mW power dissipation, an adjustable 100 mV-to-VCC reference, and a 28-pin SSOP package.
Is ADS7842E/1K suitable for a portable data logger?
Yes, the ADS7842E/1K suits a portable data logger because it combines four analog inputs with 12-bit resolution, a 200 ksample/s sampling rate, and only 2 mW power dissipation. Its 2.7 V minimum supply voltage also supports battery-oriented systems, while the parallel output can connect to a suitably designed processor interface.
ADS7842E/1K vs ADS7842EB/1KG4 - which is better for a direct replacement?
ADS7842EB/1KG4 is a direct drop-in option when its orderable qualification and environmental requirements match the target design. According to the component comparison information, both devices use the same 28-pin SSOP configuration and have matching principal performance ratings of 12-bit resolution, four channels, 200 ksample/s throughput, and a parallel interface.
What is the difference between ADS7842E/1K and ADS7842E/1KG4?
The ADS7842E/1K and ADS7842E/1KG4 retain the same core conversion ratings: 12-bit resolution, four channels, 200 ksample/s sampling, parallel output, and a 28-pin SSOP package. The ordering suffixes distinguish specific qualification or packaging details, so the complete manufacturer ordering table should be checked before substitution.
When should I choose ADS7842E/1K over ADS7842EB/1KG4?
Choose the ADS7842E/1K when it matches the exact temperature grade, qualification, delivery format, and regulatory requirements specified for the product. Choose ADS7842EB/1KG4 when its ordering attributes satisfy the system requirements while retaining the same 28-pin electrical footprint. The decision should be based on the manufacturer ordering information, not on performance inferred from the shortened MPN.
What can replace ADS7842E/1K?
ADS7842EB/1KG4 and ADS7842E/1KG4 are identified as complete replacements with matching terminals and package configuration. Both retain 12-bit resolution, four channels, a 200 ksample/s conversion rate, and a parallel interface in the 28-pin SSOP package. Confirm the exact ordering suffix before releasing a replacement to production.
Is there a cross-brand drop-in equivalent for ADS7842E/1K?
No cross-brand drop-in equivalent is established for the ADS7842E/1K in the available cross-reference information. The documented replacement choices are Texas Instruments variants using the same 28-pin SSOP configuration. A different manufacturer’s ADC should be treated as a redesign unless its complete pinout, reference arrangement, timing, and acquisition timing are independently verified.
How do I interface ADS7842E/1K to a microprocessor?
Use the ADS7842E/1K’s 12-bit parallel output and three-state output drivers to connect to a compatible processor or bus interface. The manufacturer data describes a microprocessor-oriented interface and supports operation from 2.7 V to 5 V. Account for output timing, bus direction, logic levels, and control-signal sequencing in the system design.
Where can I buy ADS7842E/1K online and check its lead time?
Use the Request a Quote form on this page to ask for ADS7842E/1K availability, current lead time, order quantity, and delivery requirements. The manufacturer product page identifies the device as a 28-pin SSOP orderable part, while the Request a Quote workflow provides a direct response for commercial planning without relying on a static price.

エンジニアリング参考データ: ADS7842E/1K — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ADS7842E/1K when a compact 28-pin SSOP system must acquire four analog channels through a 12-bit parallel interface at up to 200 ksample/s. It is particularly suitable for portable loggers, process-monitoring equipment, and embedded measurement controllers operating from 2.7 V to 5 V. ADS7842EB/1KG4 and ADS7842E/1KG4 are appropriate drop-in choices when their complete ordering attributes satisfy the product qualification and delivery requirements. ADS7842E and ADS7842EB can also serve the same electrical design when their suffix-specific configuration is acceptable. Avoid using the ADS7844N or ADS7846E as direct replacements because their serial interfaces, channel arrangements, or package configurations differ. If the design needs greater than 12-bit resolution, simultaneous sampling, or a serial interface, evaluate a different converter family rather than forcing a footprint-compatible substitution.

代替品との比較

パラメータ この製品 ADS7842EB/1KG4 ADS7842E/1KG4 ADS7842E ADS7842EB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB)
Resolution 12 bit 12 bit 12 bit 12 bit 12 bit
Input Channels 4 channels 4 channels 4 channels 4 channels 4 channels
Sampling Rate 200 ksample/s 200 ksample/s 200 ksample/s 200 ksample/s 200 ksample/s
Converter Architecture SAR SAR SAR SAR SAR
Digital Interface 12-bit parallel output 12-bit parallel output 12-bit parallel output 12-bit parallel output 12-bit parallel output
Supply Voltage Range 2.7 V to 5 V 2.7 V to 5 V 2.7 V to 5 V 2.7 V to 5 V 2.7 V to 5 V
Power Dissipation 2 mW 2 mW 2 mW 2 mW 2 mW

主な差別化要因

  • Combines four analog inputs with a parallel conversion interface (vs ADS7844N)
  • Maintains the full 200 ksample/s conversion rate (vs ADS7846E)
  • Supports compact 3.3 V and 5 V embedded systems (vs ADS7842EB/1KG4)

設計ノート

Place the input, reference, and supply decoupling components close to their corresponding pins. Keep the reference network compact because resistance and capacitance at REF can influence conversion accuracy and acquisition time. Route the four analog inputs away from the 12-bit parallel output bus and clock-control traces to minimize capacitive and inductive coupling into the sample-and-hold amplifier.

Use the manufacturer’s conversion timing and output enable sequence to control the three-state parallel outputs. Account for propagation delay, bus loading, and settling time before the processor samples the 12-bit result. When switching multiplexed channels, allow acquisition and conversion to complete before reading the corresponding output so residual charge on the internal sampling capacitor does not affect the new measurement.

The ADS7842E/1K operates from 2.7 V to 5 V and dissipates 2 mW under its specified operating conditions. Keep the analog and digital ground return connected according to the manufacturer layout guidance, and provide local supply bypass rather than relying on a distant bulk capacitor. If the reference is derived from VCC, assess supply noise because reference variation directly changes the full-scale range and measured LSB size.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The product information identifies a -40 °C to +85 °C operating range and a 28-pin SSOP package, but it does not establish RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.

データ検証日: 2026-11-18 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ADS7842E/1K datasheet ADS7842E/1K specifications ADS7842E/1K datasheet pdf ADS7842E/1K pinout ADS7842E/1K equivalent ADS7842E/1K replacement ADS7842E/1K cross reference ADS7842E/1K price ADS7842E/1K stock Texas Instruments ADS7842E/1K ADS7842E 12-bit 4-channel ADC ADS7842E 28-pin SSOP pinout ADS7842E application circuit ADS7842E/1K vs ADS7842EB/1KG4

関連部品&用語

Texas Instruments ADS7842E/1K ADS7842EB/1KG4 ADS7842E/1KG4 ADS7842E ADS7842EB ADS7844N ADS7846E analog-to-digital converter ADC successive approximation register SAR ADC data converter four-channel analog multiplexer sample-and-hold amplifier parallel output interface three-state output driver adjustable reference 12-bit resolution 200 ksample/s conversion rate 2.7 V to 5 V single supply 28-pin SSOP SSOP package surface mount
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示