Texas Instruments

ADS7842E/1K - 12-Bit 4-Channel 200ksps ADC | Texas Instruments

MPN: ADS7842E/1K ✓ Nakahanda
2.7 V to 5 V Vdss 28-pin SSOP (DB) Package
MOQ: 1 |

ADS7842E/1K Ulas

Texas Instruments ADS7842E/1K is a 12-bit, 4-channel successive-approximation-register analog-to-digital converter with a 200 ksample/s conversion rate, parallel output interface, and 28-pin SSOP package. It operates from a single 2.7 V to 5 V supply and offers an adjustable 100 mV to VCC reference range. The integrated four-channel analog multiplexer, sample-and-hold amplifier, and three-state parallel outputs make the ADS7842 a complete converter for microprocessor-controlled measurement systems.

An ADC converts an analog input voltage into a digital value suitable for processing, measurement, logging, or control. The ADS7842 belongs to the SAR ADC family, where an internal capacitor-based DAC and successive comparison determine each conversion result. Within the electronics hierarchy, it is a data-converter IC and an ADC/DAC category component designed for precision analog-signal capture. Its four-input multiplexer supports multiple sensors or measurement nodes without requiring four separate converter packages.

Key features include 12-bit resolution, a maximum sampling rate of 200 ksample/s, ±1 LSB integral and differential nonlinearity, and 72 dB SINAD. The single-supply operating range of 2.7 V to 5 V supports both 3.3 V and 5 V systems. An adjustable reference from 100 mV to VCC changes the full-scale input range and corresponding LSB resolution from 24 µV to 1.22 mV. Low power dissipation of 2 mW helps reduce system energy consumption in portable and battery-operated instruments.

The device combines a four-channel analog multiplexer, sample-and-hold amplifier, 12-bit SAR core, control logic, and three-state parallel output drivers. Parallel data output permits direct connection to appropriately buffered microprocessor or data-bus circuitry. The three-state outputs can place the bus in a high-impedance state when the converter is not selected. At 200 ksample/s, the architecture provides sufficient throughput for moderate-rate instrumentation while retaining the simple control and conversion behavior associated with SAR ADCs.

Typical uses include portable data loggers, test and measurement equipment, industrial process monitoring, battery-powered instruments, and laboratory data-acquisition systems. It is particularly useful when several analog channels must be sampled with a compact parallel-interface converter. The 200 ksample/s rate supports rapidly changing sensor signals, while the 12-bit result provides 4096 digital codes across the selected reference range.

PCB design should provide a low-impedance reference network and short analog traces to minimize acquisition errors and coupling. Decoupling capacitors should be placed close to the supply and reference pins, and digital output routing should avoid crossing sensitive input paths. Because the converter uses an adjustable reference, resistor and capacitor tolerances directly influence LSB size and calibration accuracy.

This product page combines the manufacturer specifications with practical application guidance, package details, replacement considerations, interface constraints, and PCB design notes. These engineering details help designers determine whether the ADS7842E/1K’s 12-bit resolution, four-channel multiplexing, 200 ksample/s throughput, parallel bus, and 2.7 V to 5 V supply range fit a specific data-acquisition design.

Mga alternatibo na pwedeng ilagay na ADS7842E/1K — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok ADS7842E/1K (parehas na form factor at footprint) — pagkakaiba sa Differential Nonlinearity, Digital Interface, Integral Nonlinearity, Operating Temperature Range, Power Dissipation.

Texas Instruments
Digital Interface: 12-bit parallel microprocessor interface with 3-state outputs
Texas Instruments
Power Dissipation: 2 mW (typical at rated throughput)
Texas Instruments
Differential Nonlinearity: ±1 LSB maximum
Integral Nonlinearity: ±1 LSB maximum
Operating Temperature Range: -40°C to +85°C

ADS7842EB/1KG4

✅ Drop-In
📦 28-pin SSOP (DB)
The principal 12-bit, 4-channel, 200 ksample/s, and parallel-interface ratings match exactly, giving a 0% difference in those key parameters.

📋 Alternatibo na Reference (hindi sa katalogo)

ADS7842E/1KG4

✅ Drop-In
Texas Instruments
📦 28-pin SSOP (DB)
12 bit · 4 single-ended · SAR (Successive Approximation Register) · 200 kSPS (maximum) · Single-ended analog · 0.0488% (1 LSB) · Parallel, 3-state · External, 3 V or 5 V typical

Magkontak para sa presyo

Tingnan ang Datasheet →

ADS7842E

✅ Drop-In
Texas Instruments
📦 28-pin SSOP (DB)
12 bit · 4 channels · 1 successive-approximation-register (SAR) converter · 200 kHz · 2.7 V to 5 V · 2 mW · ±1 LSB · ±1 LSB

Magkontak para sa presyo

Tingnan ang Datasheet →

ADS7842EB

✅ Drop-In
Texas Instruments
📦 28-pin SSOP (DB)
Successive-approximation sampling ADC · 12 bit · 4 channels · 200 kSPS · 12-bit parallel output · ±1 LSB maximum · ±1 LSB maximum · No missing codes

Magkontak para sa presyo

Tingnan ang Datasheet →

ADS7842E/1K Mga Pinakamataas na Rating at Electrical Characteristics

Pangangasiwaan 12 bit
Number of Input Channels 4 channels
Architecture Successive Approximation Register (SAR)
Rate ng Pagkupita 200 ksample/s
Supply Voltage Range 2.7 V to 5 V
Reference Voltage Range 100 mV to VCC
LSB Resolution 24 µV to 1.22 mV
Integral Nonlinearity ±1 LSB
Differential Nonlinearity ±1 LSB
Signal-to-Noise and Distortion 72 dB SINAD
Power Dissipation 2 mW
Digital Interface 12-bit parallel output
Output Driver Type Three-state output
Analog Front End 4-channel multiplexer with sample-and-hold amplifier
Hanay ng Temperature na Operasyon -40 °C to +85 °C
Packhaging 28-pin SSOP (DB)
Uri ng Pagpapasok Surface mount
RoHS Compliance unknown
REACH Compliance unknown

Gabay sa Pin Configuration ng ADS7842E/1K 28-pin ssop (db)

Pin configuration para sa ADS7842E/1K (28-pin ssop (db) package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 28-pin ssop (db) package para sa ADS7842E/1K

Wala ng detalyadong pinout data na magagamit para sa ADS7842E/1K.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ADS7842E/1K ay nararapat para sa 6 aplikasyons: Portable Multi-Channel Data Logging, Industrial Process Monitoring, Test and Measurement Instrumentation, Battery-Powered Sensor Acquisition, Laboratory Data Acquisition, Embedded Control Signal Conditioning.

📱

Portable Multi-Channel Data Logging

The ADS7842E/1K fits portable data loggers that must capture several sensor channels with low power and moderate conversion speed. Its four-channel multiplexer avoids four separate ADC packages, while 12-bit resolution provides 4096 codes across the selected reference range. The 200 ksample/s conversion rate supports changing inputs without imposing a lengthy pipeline delay. At 2 mW power dissipation and a 2.7 V minimum supply voltage, the device is suitable for battery-oriented measurement systems. Designers should match input ranges to the adjustable 100 mV-to-VCC reference and account for 24 µV to 1.22 mV LSB resolution.

🏭

Industrial Process Monitoring

The ADS7842E/1K supports industrial process-monitoring systems that combine several low-bandwidth sensors with a controller or data-acquisition module. Its four analog inputs can sample pressure, temperature, level, or position signals sequentially, while the 200 ksample/s SAR conversion rate provides responsive updates. A 2.7 V to 5 V operating range accommodates embedded control hardware, and the 12-bit result provides sufficient resolution for many supervisory measurements. The adjustable reference supports signal scaling, although a stable reference network and protected analog front end are important when field inputs experience noise or large transients.

🔧

Test and Measurement Instrumentation

The ADS7842E/1K is appropriate for bench instruments and portable test equipment that acquire up to four analog inputs through a parallel interface. Its 12-bit SAR architecture delivers predictable successive-approximation conversion behavior, and the 200 ksample/s rate is suitable for many general-purpose measurement channels. The three-state parallel outputs allow bus-oriented connection to suitable control logic, while the 28-pin SSOP package supports compact instrument layouts. Designers should use the manufacturer timing information to establish conversion and data-read cycles, particularly when multiplexing rapidly changing sources or using the lowest reference voltages.

🔋

Battery-Powered Sensor Acquisition

The ADS7842E/1K fits battery-powered sensor acquisition when several analog inputs must share a compact converter and power budget is limited. Its four-channel input multiplexer reduces component count, while 2 mW power dissipation and operation from 2.7 V support low-energy designs. The 12-bit conversion result is suitable for temperature, position, light, and other slowly changing environmental measurements. For duty-cycled logging, the system can control acquisition and reduce activity between samples. Input protection, reference stability, and calibration become important because battery voltage variation and sensor tolerances can otherwise dominate the converter’s ±1 LSB nonlinearity.

🖥️

Laboratory Data Acquisition

The ADS7842E/1K can serve as the acquisition front end in a laboratory data-acquisition system using a microprocessor, FPGA, or parallel bus controller. Four multiplexed analog inputs, 12-bit resolution, and a 200 ksample/s maximum sampling rate cover routine voltage measurements and signal characterization. The parallel output reduces serial-interface overhead when samples must be transferred quickly. For bench accuracy, use a quiet, stable reference and keep analog routing compact. The converter’s 100 mV-to-VCC reference flexibility lets engineers select full-scale ranges appropriate for small sensor outputs, subject to the associated 24 µV minimum LSB step.

⚙️

Embedded Control Signal Conditioning

The ADS7842E/1K is suitable for embedded control boards that must convert four analog sensor or actuator-feedback signals into digital values for a processor. Its single 2.7 V-to-5 V supply operation aligns with common embedded logic rails, and the three-state parallel outputs support connection to bus-compatible controller circuitry. The SAR conversion process and 200 ksample/s rate are adequate for feedback monitoring in many non-safety-critical control loops. Firmware must avoid changing the selected channel during an incomplete conversion, and analog input filtering should prevent out-of-band noise from folding into the selected measurement range.

What is the ADS7842E/1K?
The ADS7842E/1K is a Texas Instruments 12-bit, 4-channel SAR analog-to-digital converter that operates up to 200 ksample/s from a single 2.7 V to 5 V supply. According to the manufacturer product page, it combines a four-channel multiplexer, sample-and-hold amplifier, parallel output interface, and three-state output drivers in a 28-pin SSOP package.
What is the conversion speed of ADS7842E/1K?
The ADS7842E/1K has a maximum conversion rate of 200 ksample/s. According to the Texas Instruments ADS7842 product information, this throughput is suitable for portable data loggers, measurement equipment, and other systems that must sample several analog inputs using a successive-approximation conversion process.
What is the supply voltage range of ADS7842E/1K?
The ADS7842E/1K operates from 2.7 V to 5 V. The Texas Instruments product page identifies it as a single-supply converter, making the device suitable for 3.3 V and 5 V embedded systems. The analog reference can also be adjusted from 100 mV to VCC to set the converter’s full-scale measurement range.
How many analog input channels does ADS7842E/1K have?
The ADS7842E/1K includes a four-channel analog multiplexer. According to Texas Instruments, this allows one ADC core to sample four inputs sequentially rather than requiring four separate converter packages. The device also includes a sample-and-hold amplifier for each selected acquisition path.
Where can I download the ADS7842E/1K datasheet PDF?
The official ADS7842E/1K product and datasheet information is available from Texas Instruments at the manufacturer product-details page. Use the datasheet link on that page for the electrical characteristics, pin configuration, application information, and operating limits. The product page identifies the device as a 28-pin SSOP, 12-bit, four-channel sampling ADC.
Where is the ADS7842E/1K pinout?
The ADS7842E/1K pinout is shown in the Texas Instruments ADS7842 datasheet under the pin configuration and pin-description tables. The converter uses a 28-pin SSOP package, with the exposed interface organized around power, ground, analog input, reference, control, and 12-bit parallel output functions. Use the manufacturer pin table when assigning PCB nets.
What are the key specifications of ADS7842E/1K that engineers should know?
The principal ADS7842E/1K specifications are 12-bit resolution, four analog input channels, a 200 ksample/s conversion rate, and a 2.7 V to 5 V supply range. Texas Instruments also specifies ±1 LSB INL and DNL, 72 dB SINAD, 2 mW power dissipation, an adjustable 100 mV-to-VCC reference, and a 28-pin SSOP package.
Is ADS7842E/1K suitable for a portable data logger?
Yes, the ADS7842E/1K suits a portable data logger because it combines four analog inputs with 12-bit resolution, a 200 ksample/s sampling rate, and only 2 mW power dissipation. Its 2.7 V minimum supply voltage also supports battery-oriented systems, while the parallel output can connect to a suitably designed processor interface.
ADS7842E/1K vs ADS7842EB/1KG4 - which is better for a direct replacement?
ADS7842EB/1KG4 is a direct drop-in option when its orderable qualification and environmental requirements match the target design. According to the component comparison information, both devices use the same 28-pin SSOP configuration and have matching principal performance ratings of 12-bit resolution, four channels, 200 ksample/s throughput, and a parallel interface.
What is the difference between ADS7842E/1K and ADS7842E/1KG4?
The ADS7842E/1K and ADS7842E/1KG4 retain the same core conversion ratings: 12-bit resolution, four channels, 200 ksample/s sampling, parallel output, and a 28-pin SSOP package. The ordering suffixes distinguish specific qualification or packaging details, so the complete manufacturer ordering table should be checked before substitution.
When should I choose ADS7842E/1K over ADS7842EB/1KG4?
Choose the ADS7842E/1K when it matches the exact temperature grade, qualification, delivery format, and regulatory requirements specified for the product. Choose ADS7842EB/1KG4 when its ordering attributes satisfy the system requirements while retaining the same 28-pin electrical footprint. The decision should be based on the manufacturer ordering information, not on performance inferred from the shortened MPN.
What can replace ADS7842E/1K?
ADS7842EB/1KG4 and ADS7842E/1KG4 are identified as complete replacements with matching terminals and package configuration. Both retain 12-bit resolution, four channels, a 200 ksample/s conversion rate, and a parallel interface in the 28-pin SSOP package. Confirm the exact ordering suffix before releasing a replacement to production.
Is there a cross-brand drop-in equivalent for ADS7842E/1K?
No cross-brand drop-in equivalent is established for the ADS7842E/1K in the available cross-reference information. The documented replacement choices are Texas Instruments variants using the same 28-pin SSOP configuration. A different manufacturer’s ADC should be treated as a redesign unless its complete pinout, reference arrangement, timing, and acquisition timing are independently verified.
How do I interface ADS7842E/1K to a microprocessor?
Use the ADS7842E/1K’s 12-bit parallel output and three-state output drivers to connect to a compatible processor or bus interface. The manufacturer data describes a microprocessor-oriented interface and supports operation from 2.7 V to 5 V. Account for output timing, bus direction, logic levels, and control-signal sequencing in the system design.
Where can I buy ADS7842E/1K online and check its lead time?
Use the Request a Quote form on this page to ask for ADS7842E/1K availability, current lead time, order quantity, and delivery requirements. The manufacturer product page identifies the device as a 28-pin SSOP orderable part, while the Request a Quote workflow provides a direct response for commercial planning without relying on a static price.

Impormasyon ng Talumpati sa Engineering for ADS7842E/1K — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ADS7842E/1K when a compact 28-pin SSOP system must acquire four analog channels through a 12-bit parallel interface at up to 200 ksample/s. It is particularly suitable for portable loggers, process-monitoring equipment, and embedded measurement controllers operating from 2.7 V to 5 V. ADS7842EB/1KG4 and ADS7842E/1KG4 are appropriate drop-in choices when their complete ordering attributes satisfy the product qualification and delivery requirements. ADS7842E and ADS7842EB can also serve the same electrical design when their suffix-specific configuration is acceptable. Avoid using the ADS7844N or ADS7846E as direct replacements because their serial interfaces, channel arrangements, or package configurations differ. If the design needs greater than 12-bit resolution, simultaneous sampling, or a serial interface, evaluate a different converter family rather than forcing a footprint-compatible substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ADS7842EB/1KG4 ADS7842E/1KG4 ADS7842E ADS7842EB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB)
Resolution 12 bit 12 bit 12 bit 12 bit 12 bit
Input Channels 4 channels 4 channels 4 channels 4 channels 4 channels
Sampling Rate 200 ksample/s 200 ksample/s 200 ksample/s 200 ksample/s 200 ksample/s
Converter Architecture SAR SAR SAR SAR SAR
Digital Interface 12-bit parallel output 12-bit parallel output 12-bit parallel output 12-bit parallel output 12-bit parallel output
Supply Voltage Range 2.7 V to 5 V 2.7 V to 5 V 2.7 V to 5 V 2.7 V to 5 V 2.7 V to 5 V
Power Dissipation 2 mW 2 mW 2 mW 2 mW 2 mW

Pangunahing mga Pagkakaiba

  • Combines four analog inputs with a parallel conversion interface (kumpara saADS7844N)
  • Maintains the full 200 ksample/s conversion rate (kumpara saADS7846E)
  • Supports compact 3.3 V and 5 V embedded systems (kumpara saADS7842EB/1KG4)

Talaan ng Disenyo

Place the input, reference, and supply decoupling components close to their corresponding pins. Keep the reference network compact because resistance and capacitance at REF can influence conversion accuracy and acquisition time. Route the four analog inputs away from the 12-bit parallel output bus and clock-control traces to minimize capacitive and inductive coupling into the sample-and-hold amplifier.

Use the manufacturer’s conversion timing and output enable sequence to control the three-state parallel outputs. Account for propagation delay, bus loading, and settling time before the processor samples the 12-bit result. When switching multiplexed channels, allow acquisition and conversion to complete before reading the corresponding output so residual charge on the internal sampling capacitor does not affect the new measurement.

The ADS7842E/1K operates from 2.7 V to 5 V and dissipates 2 mW under its specified operating conditions. Keep the analog and digital ground return connected according to the manufacturer layout guidance, and provide local supply bypass rather than relying on a distant bulk capacitor. If the reference is derived from VCC, assess supply noise because reference variation directly changes the full-scale range and measured LSB size.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The product information identifies a -40 °C to +85 °C operating range and a 28-pin SSOP package, but it does not establish RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ADS7842E/1K datasheet ADS7842E/1K specifications ADS7842E/1K datasheet pdf ADS7842E/1K pinout ADS7842E/1K equivalent ADS7842E/1K replacement ADS7842E/1K cross reference ADS7842E/1K price ADS7842E/1K stock Texas Instruments ADS7842E/1K ADS7842E 12-bit 4-channel ADC ADS7842E 28-pin SSOP pinout ADS7842E application circuit ADS7842E/1K vs ADS7842EB/1KG4

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments ADS7842E/1K ADS7842EB/1KG4 ADS7842E/1KG4 ADS7842E ADS7842EB ADS7844N ADS7846E analog-to-digital converter ADC successive approximation register SAR ADC data converter four-channel analog multiplexer sample-and-hold amplifier parallel output interface three-state output driver adjustable reference 12-bit resolution 200 ksample/s conversion rate 2.7 V to 5 V single supply 28-pin SSOP SSOP package surface mount
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ