AM263P4-Q1 - Automotive 400MHz Quad-Core Cortex-R5F MCU | Texas Instruments
部品番号: AM263P4-Q1 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
AM263P4-Q1 概要
ドロップイン代替品: AM263P4-Q1 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AM263P4-Q1 （同一形状・フットプリント） — 相違点: Automotive Qualification, Core Architecture, Flash Memory, Number of Cores.
クイック比較ツール — 並列比較する代替部品を選択:
AM263P2-Q1
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →AM263P1-Q1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AM263P4
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AM263P2-Q1
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →AM263P1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AM263P4-Q1 最大定格＆電気的特性
| Core Processor | Arm Cortex-R5F (quad-core) |
| Core Architecture | 32-bit |
| Max Clock Speed | 400 MHz |
| Flash Memory | 256 KB in-package |
| パッケージ | 324-NFBGA (15x15 mm) |
| 実装タイプ | Surface Mount |
| ピン数 | 324 |
| Automotive Qualification | AEC-Q100 qualified (Q1 suffix) |
| Ethernet Switch | Integrated (supports MII, RMII, RGMII) |
| PRU-ICSS | Integrated for industrial communications |
| RoHS ステータス | unknown |
AM263P4-Q1 324-nfbga (15x15 mm) ピン配置ガイド
AM263P4-Q1 (324-nfbga (15x15 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: AM263P4-Q1.
詳細は データシート をご参照ください。
主な用途
AM263P4-Q1 の用途: 6 件s: Automotive Zone Controller, Real-Time Motor Control, Industrial Ethernet Communication, Battery Management System, Robotics Control, Power Conversion (Inverters).
Automotive Zone Controller
The AM263P4-Q1's quad-core 400 MHz Cortex-R5F and integrated Ethernet switch make it ideal for zone controllers in modern vehicles. It handles Ethernet ring networking via MII, RMII, or RGMII, connecting sensors and actuators in a zone. The four cores allow parallel processing of communication stacks and control algorithms, while AEC-Q100 qualification ensures automotive reliability. With 256 KB flash-in-package, it runs critical application code without external flash, reducing BOM and enhancing security. This MCU supports functional safety lockstep modes, enabling safe zone management.
おすすめ
Real-Time Motor Control
The AM263P4-Q1 delivers 400 MHz quad-core performance for multi-axis motor control. Each Cortex-R5F core can execute a separate field-oriented control (FOC) loop, enabling simultaneous control of multiple motors. The 256 KB flash-in-package holds control algorithms, while the PRU-ICSS handles industrial Ethernet protocols like EtherCAT for synchronized drive networks. Real-time interrupt latency is deterministic thanks to the R5F architecture. This MCU fits servo drives, traction inverters, and robotics, where high-speed current loops and communication coexist.
おすすめ
Industrial Ethernet Communication
The AM263P4-Q1 integrates a PRU-ICSS subsystem and an Ethernet switch, enabling support for industrial protocols such as EtherCAT, Profinet, and EtherNet/IP. The 400 MHz quad-core Cortex-R5F offloads protocol processing while maintaining real-time control. With 256 KB flash-in-package, firmware updates can be handled securely. The 324-NFBGA package supports high pin-count for multiple PHY interfaces. This MCU is perfect for PLCs, industrial gateways, and motor drives requiring deterministic Ethernet communication over MII, RMII, or RGMII.
おすすめ
Battery Management System
The AM263P4-Q1 is AEC-Q100 qualified for automotive battery management systems (BMS). Its quad-core 400 MHz processing handles cell monitoring, state-of-charge (SOC) estimation, and communication with the main controller. The 256 KB flash-in-package stores safety-critical algorithms, while the integrated Ethernet switch enables high-bandwidth communication in battery packs. The R5F cores can run in lockstep for functional safety, meeting ISO 26262 requirements. The 324-NFBGA package allows dense PCB integration in space-constrained BMS modules.
おすすめ
Robotics Control
The AM263P4-Q1's 400 MHz quad-core architecture is ideal for robotics, enabling concurrent processing of kinematics, trajectory planning, motor control, and sensor fusion. The PRU-ICSS provides deterministic I/O for real-time servo interfaces, while the integrated Ethernet switch supports robot communication with industrial networks. 256 KB flash-in-package reduces external memory, and AEC-Q100 qualification makes it suitable for collaborative robots. The four Cortex-R5F cores facilitate parallel execution of multiple control loops, enhancing response time and precision.
おすすめ
Power Conversion (Inverters)
The AM263P4-Q1 excels in power conversion applications like traction inverters and renewable energy inverters. Its 400 MHz quad-core Cortex-R5F executes high-speed PWM control and ADC processing for real-time power loop regulation. The 256 KB flash-in-package stores control firmware, and the PRU-ICSS enables precise timing for gate driver signals. The 324-NFBGA package ensures thermal efficiency. With AEC-Q100 qualification, it meets automotive standards for electric vehicle inverters, delivering reliable high-performance control.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AM263P4-Q1 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AM263P2-Q1 | AM263P1-Q1 | AM263P4 |
|---|---|---|---|---|
| Core Count | 4 | 2 | 1 | 4 |
| Max Clock Speed | 400 MHz | 400 MHz | 400 MHz | 400 MHz |
| Package | 324-NFBGA | 324-NFBGA | 324-NFBGA | 324-NFBGA |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Automotive Qualification | Yes (AEC-Q100) | Yes (AEC-Q100) | Yes (AEC-Q100) | No |
| Integrated Ethernet Switch | Yes | Yes | Yes | Yes |
主な差別化要因
- Quad-core processing for parallel control loops （vs AM263P2-Q1)
- Automotive-grade AEC-Q100 qualification （vs AM263P4)
- Integrated Ethernet switch with PRU-ICSS （vs TMS320F28P650SH-Q1)
設計ノート
The 324-NFBGA package dissipates heat through the PCB. Ensure a solid ground plane and sufficient thermal vias under the package. At 400 MHz with multiple cores active, power consumption can be significant; use a copper pour of at least 1 square inch to keep junction temperature within limits. Refer to TI's thermal design guidance for 324-NFBGA.
Place decoupling capacitors (0.1uF and 1uF) as close as possible to each VDD pin. Use multiple ground vias for the BGA pads. For Ethernet signals, route the MII/RMII/RGMII pairs with controlled impedance (50 ohm single-ended, 100 ohm differential) and keep them short to minimize EMI and signal reflection.
Do not overlook the power sequencing requirements for the AM263P4-Q1. Verify that the core and I/O voltages ramp in the correct order as specified in the datasheet. Also, ensure proper firmware configuration for the R5F lockstep mode if functional safety is needed; otherwise, running all cores independent may require additional safety measures.
コンプライアンス情報
AEC-Q100 qualification inferred from Q1 suffix. RoHS/REACH status not confirmed in verified data.
