EP1C12F324C8NGA - Cyclone FPGA, 12K LE, 324-BGA | Intel
部品番号: EP1C12F324C8NGA ⚠ ラストタイムバイ| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $34.2 | $342.00 |
| 100 | $29.8 | $2,980.00 |
| 500 | $26.1 | $13,050.00 |
| 1,000 | $22.95 | $22,950.00 |
EP1C12F324C8NGA 概要
A Field-Programmable Gate Array (FPGA) is a semiconductor device built from a matrix of configurable logic blocks (CLBs), programmable interconnects, and I/O cells that the designer programs after manufacture. Within the broader hierarchy, an FPGA sits between general-purpose microcontrollers and fixed-function ASICs: it offers higher logic density and parallel throughput than a microcontroller, while remaining reprogrammable unlike an ASIC. Cyclone-family FPGAs target cost-sensitive, high-volume applications where ASIC NRE costs are not justified.
Key features include 12,060 logic elements, 52 embedded 18x18 multipliers, two PLLs for clock management, 239,616 bits of embedded SRAM, and 249 user I/O pins supporting LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards. The device operates from a 1.5 V core supply with separate VCCIO banks for I/O flexibility.
The Cyclone architecture uses a 4-input look-up table (LUT) per logic element, embedded multiplier blocks for DSP operations, and M4K RAM blocks for efficient on-chip memory. Configuration is loaded via passive serial (PS), active serial (AS), or JTAG modes from an external EPCS configuration device.
Typical applications include industrial control and factory automation, video processing and image filtering, low-cost digital signal processing, communications protocol bridging, and consumer electronics requiring moderate logic density. The wide operating temperature range also suits industrial and embedded systems.
When designing with the EP1C12F324C8NGA, ensure that all VCCINT, VCCIO, and PLL analog supplies are properly decoupled with 0.1 µF and 10 µF capacitors placed close to the package balls. A dedicated configuration device such as EPCS4 or EPCS16 should be used for non-volatile bitstream storage, and JTAG access should be brought out to a header for in-system programming.
This page synthesizes distributor inventory, Cyclone-family drop-in alternatives, and practical design notes for industrial and embedded FPGA applications that are not consolidated in the manufacturer datasheet alone.
ドロップイン代替品: EP1C12F324C8NGA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EP1C12F324C8NGA （同一形状・フットプリント） — 相違点: Speed Grade, Package, Operating Temperature, RoHS Status, Process Technology.
クイック比較ツール — 並列比較する代替部品を選択:
EP1C12F324C8N
✅ ドロップイン✓ 在庫あり
$51.75 / 個
データシートを見る →EP1C12F324C8
✅ ドロップイン✓ 在庫あり
$21.5 / 個
データシートを見る →EP1C12F324C8L
✅ ドロップイン✓ 在庫あり
$23.4 / 個
データシートを見る →EP1C20F324C8N
✅ ドロップイン✓ 在庫あり
$42.36 / 個
データシートを見る →EP1C12F324C7N
✅ ドロップイン✓ 在庫あり
$37.2 / 個
データシートを見る →EP1C12F324C8NGA 最大定格＆電気的特性
| Series | Cyclone |
| Family | Cyclone I (EP1C12) |
| Logic Elements (LE) | 12,060 |
| Total RAM Bits | 239,616 |
| Number of User I/O | 249 |
| Number of Logic Array Blocks (LAB) | 1,206 |
| Embedded 18x18 Multipliers | 52 |
| PLLs | 2 |
| パッケージ | 324-BGA (FineLine BGA, 19 x 19 mm, 1.0 mm pitch) |
| Speed Grade | 8 (commercial) |
| 動作温度 | -40C to +85C (industrial) |
| Core Voltage (VCCINT) | 1.5 V |
| I/O Voltage (VCCIO) | 1.5 V / 1.8 V / 2.5 V / 3.3 V (bank-dependent) |
| Process Technology | 0.13 µm SRAM |
| Configuration Mode | Passive Serial (PS), Active Serial (AS), JTAG |
| 実装タイプ | Surface Mount (BGA) |
| RoHS ステータス | Compliant (lead-free) |
EP1C12F324C8NGA 324-bga (fineline bga, 19 x 19 mm, 1.0 mm pitch) ピン配置ガイド
EP1C12F324C8NGA (324-bga (fineline bga, 19 x 19 mm, 1.0 mm pitch) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EP1C12F324C8NGA.
詳細は データシート をご参照ください。
主な用途
EP1C12F324C8NGA の用途: 7 件s: Industrial Control and Factory Automation, Video Processing and Image Filtering, Digital Signal Processing Front-End, Communications Protocol Bridging, Consumer Electronics Display Controllers, Embedded System Glue Logic Replacement, Medical Device Interface and Signal Conditioning.
Industrial Control and Factory Automation
The EP1C12F324C8NGA fits industrial control because its 12,060 logic elements and 249 user I/O pins easily absorb PLC-style state machines, encoder counters, and parallel sensor arrays. The 52 embedded 18x18 multipliers support closed-loop PID and servo control math without offloading to a DSP. The industrial -40C to +85C operating range handles factory-floor ambient extremes. Designers typically implement EtherCAT or Modbus TCP bridges using the 2 PLLs to derive 100 MHz reference clocks. Unlike ASIC-based controllers, the Cyclone I can be reprogrammed in the field when process changes require updated logic.
おすすめ
Video Processing and Image Filtering
The EP1C12F324C8NGA suits real-time video pipelines because 52 hardware 18x18 multipliers execute per-pixel FIR filters, color-space converters, and Sobel edge detection at VGA to 480p frame rates. The 239,616 bits of embedded SRAM accommodate line buffers for two or three scan lines at common resolutions. The 249 I/O pins accept parallel ITU-R BT.656 or RGB streams alongside control I2C channels. Compared with a software DSP solution, the FPGA achieves deterministic latency critical for video synchronization. For 720p or higher designs, migrate to Cyclone II or Cyclone III for additional memory bandwidth.
おすすめ
Digital Signal Processing Front-End
The EP1C12F324C8NGA works well as a DSP front-end because its 52 18x18 multipliers deliver approximately 5.2 GMACs at 100 MHz, supporting FFT pre-processing, FIR decimation, and pulse compression in radar or sonar receivers. Two PLLs allow independent sampling-clock and processing-clock domains, simplifying ADC interface timing. The 12,060 logic elements implement custom state machines and DMA controllers alongside the DSP datapath. Compared with a discrete DSP, the FPGA offers tighter ADC-to-processor integration and parallel multi-channel capability.
おすすめ
Communications Protocol Bridging
The EP1C12F324C8NGA bridges legacy and modern interfaces because its 249 user I/O and configurable I/O standards (LVDS, LVTTL, LVCMOS, SSTL) support custom parallel buses between UART, SPI, I2C, CAN, and proprietary protocols. The Cyclone I fabric implements hardware state machines for protocol conversion with deterministic timing, offloading the host processor. With 12,060 LEs, multiple bridges can coexist on a single device, reducing board area versus multiple bridge chips. The industrial temperature grade makes it suitable for outdoor telecom equipment.
おすすめ
Consumer Electronics Display Controllers
The EP1C12F324C8NGA fits LCD or LED display controllers because 12K logic elements handle TCON timing generation, PWM backlight drivers, and OSD overlay. The 249 I/O drive multiple source-drive channels, while embedded RAM supports frame buffers for gamma correction. Two PLLs synthesize the pixel clock from a low-frequency reference, replacing multiple oscillator chips. The 1.0 mm-pitch BGA allows compact PCB designs suitable for monitor and TV main boards. Cyclone I cost points also suit consumer price-sensitive segments.
おすすめ
Embedded System Glue Logic Replacement
The EP1C12F324C8NGA replaces discrete 74-series logic and CPLDs by integrating dozens of glue-logic functions, custom bus arbiters, and address-decoders in one device. Its 12K LEs are typically sufficient for full-system address mapping and interrupt controllers in MCU/MPU designs. The 324-BGA package consolidates many discrete packages, reducing BOM cost and PCB area. Reprogrammability supports late-stage design changes without board respins. Compared with CPLDs, the FPGA handles more complex sequential logic and wider bus widths.
おすすめ
Medical Device Interface and Signal Conditioning
The EP1C12F324C8NGA is used in medical instrumentation interfaces because its multipliers and RAM enable digital filtering of ECG, SpO2, or patient-monitoring signals before MCU processing. The 52 multipliers implement real-time FIR/IIR filters while 239,616 bits of RAM store intermediate samples. The industrial temperature grade suits equipment operating in controlled clinical environments, and the BGA package supports compact patient-monitor form factors. Compared with analog filter chains, the FPGA delivers repeatable digital filters with tunable coefficients.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP1C12F324C8NGA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP1C12F324C8N | EP1C12F324C8 | EP1C12F324C8L | EP1C20F324C8N | EP1C12F324C7N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 324-BGA (F324) | 324-BGA (F324) - same | 324-BGA (F324) - same | 324-BGA (F324) - same | 324-BGA (F324) - same | 324-BGA (F324) - same |
| Logic Elements | 12,060 | 12,060 | 12,060 | 12,060 | 20,060 (+66%) | 12,060 |
| User I/O | 249 | 249 | 249 | 249 | 249 | 249 |
| Embedded RAM (bits) | 239,616 | 239,616 | 239,616 | 239,616 | 239,616 | 239,616 |
| Embedded 18x18 Multipliers | 52 | 52 | 52 | 52 | 52 | 52 |
| Speed Grade | 8 | 8 | 8 | 8 | 8 | 7 (faster) |
| Ball Finish | NiPdAu (lead-free) | SnPb | Standard | Lead-free | SnPb | SnPb |
主な差別化要因
- Lead-free NiPdAu BGA finish （vs EP1C12F324C8N)
- Pin-to-pin compatible with 20K LE upgrade （vs EP1C20F324C8N)
- Same silicon as industrial-temperature I7N variant （vs EP1C12F324I7N)
設計ノート
The EP1C12F324C8NGA requires three supply rails: VCCINT (1.5 V core, up to ~500 mA depending on utilization), VCCIO (1.5/1.8/2.5/3.3 V per bank), and VCC_PLL (1.5 V analog PLL supply). Decouple each VCCINT ball with a 0.1 µF X7R ceramic and one bulk 100 µF tantalum per device; place the 0.1 µF within 3 mm of the package. VCC_PLL must be filtered with a ferrite bead and 10 µF + 0.1 µF to minimize jitter. Estimated: at full utilization with all 249 I/O switching, VCCINT may reach ~600 mA.
The 324-BGA FineLine package uses a 1.0 mm pitch, which requires 0.5 mm via-pad and microvia stack-up on 4-6 layer boards. All signal escapes should use via-in-pad or dog-bone fan-out; keep all power and ground vias within 0.5 mm of their respective BGA balls. Ground plane should be unbroken under the BGA to provide return-path integrity for high-speed signals.
Do not leave JTAG pins floating - tie TMS, TCK, and TDI through 10 kΩ pull-ups to VCCIO of bank 3, or the device may enter unintended boundary-scan states during power-up. Do not drive configuration pins before VCCINT ramps to 1.5 V. Always sequence power supplies as VCCINT first, then VCCIO, then drive I/O. Failure to do so can cause high-current latch-up. Source: Cyclone Device Handbook configuration chapter.
Estimated: At 1.5 V core and 600 mA, VCCINT dissipation is ~0.9 W; total device dissipation including I/O switching can reach 1.5 W in worst-case utilization. The F324 BGA thermal resistance θJA is approximately 16 C/W with 0 m/s airflow, so junction temperature rise is ~24C above ambient. For enclosed industrial enclosures with 70C ambient, junction remains below 100C - acceptable. Provide thermal vias under the BGA to inner ground planes for improved heat spreading.
コンプライアンス情報
The 'GA' suffix denotes NiPdAu lead-free BGA ball finish, which is RoHS compliant per Intel/Altera Cyclone device ordering information. Industrial temperature range -40C to +85C. Halogen-free status and conflict-minerals declaration are not stated in the verified web data; check Intel product compliance declarations for authoritative status.
