M29W800FB70ZA3SF - 8Mb 3V Parallel NOR Flash 70ns | Micron
部品番号: M29W800FB70ZA3SF ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.95 | $3.95 |
| 10 | $3.55 | $35.50 |
| 100 | $3.1 | $310.00 |
| 500 | $2.78 | $1,390.00 |
| 1,000 | $2.45 | $2,450.00 |
M29W800FB70ZA3SF 概要
Parallel NOR Flash is a nonvolatile memory technology in which the memory array is addressed directly over a parallel address and data bus, giving the processor random access to any byte or word without the command overhead of serial interfaces. Within the memory hierarchy, NOR Flash sits alongside DRAM, SRAM, and pseudostatic SRAM as a primary code-storage device: it is XIP (execute-in-place) capable, meaning a CPU can boot and run code directly from the array.
Key features of the M29W800FB family include the FB bottom-boot organization (the small parameter block is located at the bottom of the address map), a fast 70 ns access time suited to zero-wait-state or lightly-waited 16-bit buses, and single low-voltage 2.7 V to 3.6 V operation that eliminates separate programming supplies. Sector architecture combines boot blocks and uniform main blocks, enabling parameter storage and firmware in one device.
Technically, the device uses Micron's advanced NOR floating-gate cell process with internal program/erase state machines, erasable and programmable over the full industrial temperature range. Block protection schemes guard boot code against accidental erase, and status flags plus data polling streamline write management without dedicated handshake lines.
Typical applications include set-top boxes, industrial drives, networking equipment, printers, and automotive/industrial modules that boot from NOR, where XIP code execution, fast random access, and long data retention matter more than serial-interface pin count.
Design consideration: budget the VCC rail for program/erase current peaks, which are significantly higher than read current, and decouple VCC locally to prevent brownout during block erase.
This page synthesizes distributor pricing, availability, drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.
ドロップイン代替品: M29W800FB70ZA3SF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: M29W800FB70ZA3SF （同一形状・フットプリント） — 相違点: Package, Interface, Density, Organization, Access Time.
クイック比較ツール — 並列比較する代替部品を選択:
M29W800FT70ZA3SF
✅ ドロップイン✓ 在庫あり
$2.05 / 個
データシートを見る →M29W400FB55N3F
✅ ドロップイン✓ 在庫あり
$2.55 / 個
データシートを見る →M29W800FB70ZA3SF 最大定格＆電気的特性
| Density | 8 Mb (1 MB) |
| Memory Organization | 1M x 8 / 512K x 16 |
| インターフェースタイプ | Parallel |
| Access Time | 70 ns |
| Supply Voltage (VCC) | 2.7 V to 3.6 V |
| Boot Block Location | Bottom boot (FB) |
| パッケージ | 48-TFBGA (6x8) |
| 動作温度 | -40C to +125C |
| 実装タイプ | Surface Mount |
| Byte/Word Organization Pin | Yes (BYTE pin selects x8/x16) |
| XIP Support | Yes (parallel random-access, execute-in-place capable) |
| Reel Option | Available (M29W800FB70ZA3SF TR) |
M29W800FB70ZA3SF 48-tfbga (6x8) ピン配置ガイド
M29W800FB70ZA3SF (48-tfbga (6x8) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: M29W800FB70ZA3SF.
詳細は データシート をご参照ください。
主な用途
M29W800FB70ZA3SF の用途: 6 件s: Set-Top Box Boot Firmware, Industrial Drive and Motor Controller Code Storage, Networking Equipment Boot ROM, Printer and Imaging Controller Firmware, Automotive-Grade Industrial Modules, Test and Measurement Instrument Firmware.
Set-Top Box Boot Firmware
Set-top boxes and broadcast receivers boot their primary firmware from parallel NOR Flash because the host SoC executes boot code in place over a parallel bus. The M29W800FB70ZA3SF's 70 ns access time minimizes wait states during boot, while its 8 Mb density holds a compressed bootloader plus parameters. The FB bottom-boot organization places the parameter block at address 0, matching typical boot ROM address maps. Program/erase state machines allow in-field firmware updates over the broadcast channel; designers should reserve a protected boot block and decouple VCC for erase-current peaks during OTA reprogramming.
おすすめ
Industrial Drive and Motor Controller Code Storage
Industrial drives and motor controllers require nonvolatile code storage that survives harsh temperatures and power interruptions. The M29W800FB70ZA3SF operates from -40C to +125C, covering cabinet and drive-internal environments, and its parallel XIP capability lets the motion MCU boot directly from Flash without a DRAM-based loader, improving power-fail recovery determinism. With a 2.7 V to 3.6 V single supply it integrates cleanly with 3.3 V controller rails. Block protection should guard the servo-tuning parameter block against accidental erase during firmware field updates in the factory or on-site.
おすすめ
Networking Equipment Boot ROM
Routers, switches, and line cards historically boot management firmware from parallel NOR before handing off to larger NAND or SPI Flash images. The M29W800FB70ZA3SF provides deterministic 70 ns random access required by PowerPC and MIPS boot ROMs, and its 512K x 16 organization matches standard 16-bit boot buses. The industrial temperature range supports outdoor telecom enclosures. During design, reserve the bottom boot block for the immutable boot loader, use data polling for erase status instead of busy lines, and verify bus turnaround timing at 3.0 V minimum supply to guarantee the 70 ns access across corners.
おすすめ
Printer and Imaging Controller Firmware
Laser printers and imaging devices store page-description firmware and calibration tables in NOR Flash so the print controller boots instantly at power-on. The M29W800FB70ZA3SF's 8 Mb array holds a compressed controller image plus factory calibration data in separate protected sectors, and its parallel bus interfaces directly to legacy imaging SoCs designed around asynchronous NOR. The -40C to +125C rating tolerates fuser-adjacent thermal gradients. In-system update routines should use the device's erasable sector architecture to refresh the application block while leaving the boot and calibration blocks protected.
おすすめ
Automotive-Grade Industrial Modules
Telematics, gateway, and body-control modules derived from automotive platforms demand memory qualified across the full -40C to +125C industrial band with high data-retention integrity. The M29W800FB70ZA3SF meets this temperature envelope and stores boot code that must be executable immediately at crank or power-on via parallel XIP. Its single 3.3 V-class supply simplifies power design against load-dump-constrained rails with upstream regulation. Designers must account for program/erase current spikes on battery-backed rails, add adequate VCC decoupling near the BGA, and lock the parameter block against stray writes from noisy CAN-induced resets.
おすすめ
Test and Measurement Instrument Firmware
Bench instruments such as oscilloscopes, data loggers, and signal generators boot control firmware from parallel NOR for deterministic cold-start behavior. The M29W800FB70ZA3SF's 70 ns access and x8/x16 selectable organization suit both 8-bit front-panel controllers and 16-bit DSP boot buses on one design. Field firmware upgrades leverage the sector-erase architecture with the FB bottom boot block kept write-protected so a failed update cannot brick the instrument. Verify 70 ns timing margin at the minimum 2.7 V VCC and maximum bus capacitance, and add series termination on address lines to control reflections on longer PCB traces.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: M29W800FB70ZA3SF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | M29W800FT70ZA3SF | M29W400FB55N3F |
|---|---|---|---|
| Brand | Micron Technology | Micron Technology | Micron Technology |
| Density | 8 Mb | 8 Mb | 4 Mb |
| Access Time | 70 ns | 70 ns | 55 ns |
| Boot Block Location | Bottom boot (FB) | Top boot (FT) | Bottom boot (FB) |
| Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Memory Organization | 1M x 8 / 512K x 16 | 1M x 8 / 512K x 16 | 512K x 8 / 256K x 16 |
主な差別化要因
- Bottom boot organization for address-0 boot ROMs （vs M29W800FT70ZA3SF)
- Faster random access for XIP （vs M29W400FB55N3F)
- Industrial temperature with single-supply operation （vs M29W800FT70ZA3SF)
設計ノート
Budget the VCC rail for program and erase current peaks, which are substantially higher than read current on this NOR family. During block erase the internal charge pump draws pulsed current that can brown out a lightly decoupled 3.3 V rail shared with sensitive analog circuitry. Place at least one 100 nF ceramic capacitor within 5 mm of the TFBGA VCC/VSS ball pairs plus a bulk 10 uF capacitor nearby. If the rail is shared, consider local ferrite isolation. Verify the regulator can source the datasheet program/erase ICC, not just read ICC, across the 2.7 V minimum supply corner.
The 70 ns access time is guaranteed only if bus loading and trace lengths are controlled. Keep address and data traces under 100 mm where possible, match data-line lengths within the group, and add series source termination (22-33 ohm) on address lines when the bus fans out to multiple loads. Validate timing at the worst corner: 2.7 V VCC, maximum temperature, and maximum bus capacitance, since output drive weakens at low supply. In x16 mode, confirm the host can close read timing with the 70 ns array access plus buffer delays; add a wait state if marginal.
Do not interchange FB (bottom boot) and FT (top boot) variants without relocating the boot image in the address map - the pin maps are identical but the parameter block addresses differ, and a mismatched part will not boot. Tie the BYTE pin firmly to the desired logic level; floating it can cause bus contention in x8/x16 selection. Confirm package code compatibility: the ZA 48-TFBGA land pattern differs from TSOP and other M29W800 package options, so a TSOP-coded substitute will not mount on this PCB.
コンプライアンス情報
Compliance certificates not present in provided web data; Micron's official part-detail page provides downloadable RoHS/REACH material declarations per part. Request at time of order.
