Analog Devices

MAX3221EETE+T - 250kbps AutoShutdown RS-232 | Analog Devices

部品番号: MAX3221EETE+T ✓ 生産中
3.0 V to 5.5 V Vdss 1 µA Id 16-pin TQFN with exposed pad Package
MOQ: 1 |

MAX3221EETE+T 概要

The Analog Devices MAX3221EETE+T is a 3.0V to 5.5V RS-232 transceiver with one transmitter and one receiver, 250 kbps operation, and ±15 kV ESD protection in a 16-pin TQFN package with an exposed pad. The MAX3221E family also provides automatic shutdown and wakeup, with supply current reduced to 1 µA when no valid receiver signal is detected.

An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar, inverted signaling used by RS-232 equipment. It belongs to the interface IC hierarchy, where it bridges UART, UART-compatible controller, and peripheral circuitry with legacy or industrial communications ports. The MAX3221E supports the EIA/TIA-232 and V.28/V.24 signaling requirements identified for the MAX3221E family.

The MAX3221EETE+T combines a 250 kbps data rate with a 3.0V to 5.5V supply range, allowing operation alongside both 3.3V and 5V digital systems. Its AutoShutdown circuit recognizes when connected equipment is powered off or no valid signal appears on a receiver input, then disables the internal charge pump and drivers to reduce power consumption. Automatic wakeup restores operation when a valid signal returns.

The enhanced electrostatic-discharge design protects the transmitter outputs and receiver inputs against ±15 kV ESD events. This protection is particularly useful for cables connected to external equipment, where electrostatic discharge can enter through a connector rather than through the protected logic-side pins. The device converts one TTL or CMOS data channel into an RS-232 signal and converts one inbound RS-232 signal back into a logic-level output.

Typical uses include industrial serial adapters, test and measurement equipment, point-of-sale terminals, security systems, and embedded systems that retain an RS-232 port. The 250 kbps capability supports substantially faster communication than conventional low-speed RS-232 links, while the small TQFN package suits compact control boards. Systems requiring more than one RS-232 port normally require additional transceiver channels or a multichannel interface family.

When laying out the PCB, place the charge-pump capacitors and interface capacitors close to their designated pins, connect the exposed thermal pad to the ground plane, and keep the RS-232 traces away from sensitive clock, sensor, and analog signals. Confirm capacitor values, voltage ratings, and exposed-pad soldering requirements against the manufacturer datasheet before fabrication.

This product page combines the manufacturer interface specifications with package, sourcing, application, and replacement guidance. It also highlights practical ESD, layout, power-management, and signal-integrity considerations that engineers can apply when integrating the MAX3221EETE+T into a compact RS-232 circuit.

ドロップイン代替品: MAX3221EETE+T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX3221EETE+T (同一形状・フットプリント) — 相違点: Package, ESD Protection, Maximum Data Rate, Supply Voltage Range, AutoShutdown Supply Current.

Analog Devices
Package: 16-pin SSOP
ESD Protection: ±15kV
Maximum Data Rate: 250kbps
比較対象 MAX3221EETE+T →
Analog Devices
Package: 16-pin TQFN, 5 mm x 5 mm
比較対象 MAX3221EETE+T →
Analog Devices
Package: 16-pin SSOP
ESD Protection: ±15kV
Maximum Data Rate: 250kbps
比較対象 MAX3221EETE+T →

MAX3221ECTE+T

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 TQFN-16
RS-232 Transceiver · 1 channel · 1 channel · 250 kbps · 3.0 V to 5.5 V · 1 µA · ±15 kV · RS-232

価格はお問い合わせください

データシートを見る →

MAX3221ECAE+T

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 TQFN-16
RS-232 transceiver · 1 transmitter, 1 receiver · 3.0V to 5.5V · 250kbps · ±15kV · approximately 1µA · EIA/TIA-232 · V.28 and V.24

価格はお問い合わせください

データシートを見る →

MAX3221EEAE-T

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 TQFN-16
RS-232 transceiver · 1 driver · 1 receiver · 3.0V to 5.5V · 250kbps · 1µA · ±15kV · EIA/TIA-232

価格はお問い合わせください

データシートを見る →

MAX3221EETE+T 仕様

Product Type RS-232 transceiver
Transceiver Configuration 1 transmitter and 1 receiver
Duplex Mode Full duplex
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV
Shutdown Supply Current 1 µA
Power Management Feature AutoShutdown with automatic wakeup
Communication Standard EIA/TIA-232 and V.28/V.24
Logic Interface TTL/CMOS-compatible
パッケージ 16-pin TQFN with exposed pad
Package Dimensions 5 mm × 5 mm
実装タイプ Surface mount
ピン数 16 pins
RoHS ステータス RoHS details shown in comparison listings

MAX3221EETE+T 5 mm × 5 mm ピン配置ガイド

MAX3221EETE+T (5 mm × 5 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX3221EETE+T の 5 mm × 5 mm パッケージピン配置図

詳細なピン配置データはありません: MAX3221EETE+T.

詳細は データシート をご参照ください。

主な用途

MAX3221EETE+T の用途: 6 件s: Industrial Serial Adapters, Test and Measurement Equipment, Point-of-Sale Terminals, Security and Access Systems, Embedded Control Systems, RS-232-to-Logic Conversion.

🏭

Industrial Serial Adapters

The MAX3221EETE+T suits compact adapters that must bridge a 3.3V or 5V controller with an external RS-232 port. Its 250 kbps data-rate capability provides useful throughput for configuration transfer and diagnostic protocols, while ±15 kV interface protection improves resilience at the cable-facing pins. AutoShutdown reduces consumption to 1 µA when the connected equipment is inactive. The circuit should use the manufacturer-recommended charge-pump and interface capacitors, with the exposed pad connected to ground according to the TQFN land pattern.

🔧

Test and Measurement Equipment

The MAX3221EETE+T provides a compact logic-to-RS-232 path for programmable instruments, laboratory controllers, and service interfaces. At up to 250 kbps, it supports faster command exchange than basic serial links, while its 3.0V to 5.5V range permits operation from common instrumentation supply rails. The ±15 kV ESD rating is useful when users attach external cables. Keep the interface route away from precision analog sections and use the datasheet ground and charge-pump capacitor arrangement to minimize coupling.

🖥️

Point-of-Sale Terminals

MAX3221EETE+T is suitable for point-of-sale equipment that communicates with a receipt printer, scanner, or service terminal over RS-232. The single full-duplex channel can carry commands and responses, and the 250 kbps rating handles common retail protocols efficiently. Automatic shutdown lowers power use when the peripheral is disconnected or inactive, while ESD protection adds protection at the external connector. Confirm connector pin assignment and cable signaling before placing the transceiver in the PCB layout.

🧩

Security and Access Systems

The MAX3221EETE+T can connect a security controller or access-control terminal to a legacy alarm panel, intercom, or configuration computer through RS-232. Its ±15 kV ESD protection is valuable when the interface reaches an external connector, and AutoShutdown supports low-power operation during idle periods. The 250 kbps rate is more than adequate for typical command and event traffic. Use the complete manufacturer pin table and exposed-pad layout, and keep unprotected logic-side routing away from the cable entry.

⚡

Embedded Control Systems

The MAX3221EETE+T provides a straightforward way for a 3.3V embedded controller to communicate with an RS-232 service port. Its 250 kbps capability supports firmware download and diagnostic traffic, and the automatic shutdown and wakeup behavior can reduce system load when no peripheral is connected. The 5 mm by 5 mm TQFN package preserves board area, although the exposed pad requires proper thermal-pad layout and soldering. Validate logic levels, UART baud tolerance, and isolation requirements during component selection.

🌐

RS-232-to-Logic Conversion

MAX3221EETE+T is appropriate for standalone level-conversion circuits that interface legacy RS-232 equipment with modern CMOS logic. One receiver translates the incoming bipolar signal, and one transmitter produces the corresponding outgoing RS-232 signal. Its 3.0V to 5.5V operating range supports common supply choices, while ±15 kV protection strengthens the cable-facing interface. Follow the manufacturer’s external-capacitor and charge-pump layout because incorrect values or long capacitor routes can impair startup and signal integrity.

What is the MAX3221EETE+T and what does it do?
The MAX3221EETE+T is a single-channel full-duplex RS-232 transceiver operating from 3.0V to 5.5V at up to 250 kbps. It converts one logic-level UART signal to RS-232 and converts one inbound RS-232 signal to logic level. According to the Analog Devices MAX3221E product information, the family provides automatic shutdown and wakeup for low-power systems.
What are the key specifications of MAX3221EETE+T?
The principal MAX3221EETE+T specifications are a 3.0V to 5.5V supply range, 250 kbps maximum data rate, ±15 kV ESD protection, and one RS-232 transmitter with one receiver. The device is offered in a 16-pin TQFN package measuring 5 mm by 5 mm. These characteristics are identified by Analog Devices and its published product listings.
Where can I download the MAX3221EETE+T datasheet PDF?
The official MAX3221E datasheet and product information are available from Analog Devices at https://www.analog.com/en/products/MAX3221E.html. Use the manufacturer datasheet to verify the complete pin description, external-capacitor values, electrical limits, exposed-pad connection, and PCB layout requirements before releasing a production design.
Where can I find the MAX3221EETE+T pinout?
The MAX3221EETE+T pinout and pin-description table are located in the official MAX3221E manufacturer datasheet. The device uses a 16-pin TQFN package with an exposed pad, so the exposed thermal pad must also be checked against the land-pattern instructions. Assign PCB tracks from the datasheet pin table rather than relying on package orientation alone.
Does the MAX3221EETE+T support 3.3V and 5V systems?
Yes. The MAX3221EETE+T operates from 3.0V to 5.5V, covering 3.3V and 5V supply rails. Its MAX3221E family description identifies the part as a 3V-powered EIA/TIA-232 and V.28/V.24 communications interface. The surrounding UART or controller must still match the selected logic voltage and signal levels.
What does AutoShutdown do on the MAX3221EETE+T?
AutoShutdown reduces MAX3221EETE+T supply current to 1 µA when the receivers detect no valid signal level. The internal supply and drivers shut down when the connected peripheral is off or its transmitter is inactive. According to Analog Devices, the device automatically wakes when a valid signal returns, avoiding continuous operation of the charge-pump circuitry.
What is the maximum data rate of MAX3221EETE+T?
The MAX3221EETE+T supports data rates up to 250 kbps. This makes it suitable for RS-232 links that need more throughput than conventional low-speed serial connections. The rating is a maximum operating capability, so the installed cable, connector, UART baud-rate tolerance, and circuit layout must also support the intended communications rate.
What ESD protection does MAX3221EETE+T provide?
The MAX3221EETE+T provides enhanced electrostatic-discharge protection rated at ±15 kV on its RS-232 interface. The protection is especially important when the transceiver connects to a user-accessible cable through an external connector. It does not replace normal grounding, shielding, cable design, and system-level surge protection practices.
Where can I buy MAX3221EETE+T and check current lead time?
Use the Request a Quote form on this page to request MAX3221EETE+T pricing, stock confirmation, minimum order quantity, and current lead time. Quote requests allow the exact 16-pin TQFN ordering code and tape-and-reel packaging requirement to be confirmed together before an order is placed.
Is MAX3221EETE+T in stock?
Current MAX3221EETE+T stock status can change with component demand and packaging inventory. Submit a Request a Quote on this page with the required quantity and delivery destination to obtain an availability confirmation, production lead time, and shipping schedule for the exact MAX3221EETE+T ordering code.
What is the lead time for MAX3221EETE+T?
Lead time depends on current inventory, order quantity, and the requested delivery schedule. Use the Request a Quote form on this page to request a current lead-time commitment for MAX3221EETE+T. For production schedules, include the required quantity, target delivery date, and whether additional safety stock is needed.
MAX3221EETE+T vs MAX3221EETE+ - what is the difference?
MAX3221EETE+T and MAX3221EETE+ identify the same MAX3221E electrical configuration in 16-pin TQFN packaging, while the ordering suffix distinguishes the supplied packing form. Both are associated with the 3.0V to 5.5V, 250 kbps RS-232 interface. Confirm the required package, temperature grade, and reel or tube format before treating one ordering code as interchangeable with the other.
When should I choose MAX3221EETE+T over another RS-232 interface?
Choose MAX3221EETE+T when the design needs one full-duplex RS-232 channel, a 250 kbps data rate, operation from 3.0V to 5.5V, and automatic low-power shutdown. A multichannel or fixed-function alternative may be preferable when several ports, different logic thresholds, galvanic isolation, or a non-TQFN land pattern is required.
Is MAX3221EETE+T suitable for industrial RS-232 equipment?
MAX3221EETE+T can be used in compact serial-interface equipment requiring 3.0V to 5.5V operation, 250 kbps signaling, automatic wakeup, and ±15 kV ESD protection. For industrial deployment, confirm the device temperature grade, system isolation requirements, cable transient requirements, and applicable regulatory constraints before production release.
What is the best drop-in replacement for MAX3221EETE+T?
The closest same-family drop-in choice is another MAX3221EETE ordering code with the same 16-pin TQFN footprint, electrical ratings, and required temperature grade. However, the suffix must be checked for packaging and grade changes before replacement. Cross-brand devices such as the ADM3232E may be functionally comparable, but their pinout and exposed-pad details must be verified against the manufacturer datasheet.
Can MAX3221ECTE+T replace MAX3221EETE+T?
MAX3221ECTE+T can be a candidate when its complete operating-temperature grade matches the system requirement because it remains in the same MAX3221E 16-pin TQFN family. Its logic interface, 3.0V to 5.5V supply range, 250 kbps class, and AutoShutdown function align with the target, but temperature-grade differences must be reviewed before substitution.

エンジニアリング参考データ: MAX3221EETE+T — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MAX3221EETE+T for a compact, single-channel RS-232 design that operates from 3.0V to 5.5V, supports rates up to 250 kbps, and benefits from automatic shutdown and wakeup. MAX3221ECTE+T is a practical same-family alternative when its temperature grade satisfies the environmental requirement and the ordering suffix can be qualified without changing the PCB. MAX3221ECAE+T offers the same 16-pin TQFN platform and major interface ratings, but its grade must also be checked. MAX3221EEAE-T is suitable only when the exact temperature, packing, and exposed-pad requirements match. If the system needs multiple RS-232 ports, a multichannel family such as MAX3232E or MAX3243E may reduce component count. Cross-brand options should be selected only after their pinout, package, supply range, data rate, and ESD ratings have been compared directly against the MAX3221E datasheet.

代替品との比較

パラメータ この製品 MAX3221ECTE+T MAX3221ECAE+T MAX3221EEAE-T
Package TQFN-16 with exposed pad TQFN-16 with exposed pad TQFN-16 with exposed pad TQFN-16 with exposed pad
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Transceiver Configuration 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps 250 kbps
ESD Protection ±15 kV ±15 kV ±15 kV ±15 kV
Shutdown Supply Current 1 µA 1 µA 1 µA 1 µA
Power Management AutoShutdown with automatic wakeup AutoShutdown with automatic wakeup AutoShutdown with automatic wakeup AutoShutdown with automatic wakeup
Communication Standard EIA/TIA-232 and V.28/V.24 EIA/TIA-232 and V.28/V.24 EIA/TIA-232 and V.28/V.24 EIA/TIA-232 and V.28/V.24

主な差別化要因

  • Maintains the MAX3221E 16-pin TQFN drop-in platform (vs MAX3221ECTE+T)
  • Combines 250 kbps operation with automatic power management (vs MAX3221ECAE+T)
  • Provides enhanced cable-side ESD protection (vs MAX3221EEAE-T)

設計ノート

Place every charge-pump and interface capacitor directly between its designated pins and ground, using the shortest possible traces. The MAX3221E family uses internal switched-capacitor circuitry, so long capacitor connections can increase ringing, startup delay, and radiated noise. Follow the manufacturer PCB-layout example and keep the RS-232 traces short, away from clocks and analog inputs, and terminated according to the connected cable configuration.

Do not assume that any family member with a similar ordering code is automatically interchangeable. Confirm the 16-pin TQFN land pattern, exposed-pad connection, temperature grade, and tape-or-tube ordering requirement. The MAX3221ECTE+T, MAX3221ECAE+T, and MAX3221EEAE-T alternatives retain the same general interface ratings but their suffix differences may change environmental or packing requirements.

Keep the cable-facing RS-232 nets away from sensitive logic and analog traces, and provide a continuous ground reference beneath the interface area. Although the device includes ±15 kV ESD protection, protection is most effective when short connector-to-transceiver routes minimize surge current paths. If a cable crosses a board boundary, add the connector-side protection and grounding arrangement required by the system’s ESD and EMC architecture.

Use the MAX3221EETE+T AutoShutdown behavior only after confirming that the connected equipment cannot place a valid but unwanted signal on the receiver input. Automatic wakeup can therefore power the charge pump when the remote device activates. Verify that 1 µA shutdown behavior is compatible with the system’s leakage budget and that the power rail can support startup current when the interface wakes.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

RoHS details are shown in the MAX3221E comparison listing. No specific REACH, halogen-free, conflict-minerals, or automotive qualification statement is confirmed for this ordering code.

データ検証日: 2026-11-18 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX3221EETE+T datasheet MAX3221EETE+T pinout MAX3221EETE+T datasheet pdf MAX3221EETE+T price MAX3221EETE+T stock MAX3221EETE+T replacement MAX3221EETE+T equivalent MAX3221EETE+T vs MAX3221ECTE+T MAX3221EETE+T footprint Analog Devices MAX3221EETE+T MAX3221EETE+T RS-232 transceiver MAX3221EETE+T 250kbps MAX3221EETE+T TQFN-16 MAX3221EETE+T industrial interface What can replace MAX3221EETE+T?

関連部品&用語

Analog Devices MAX3221EETE+T MAX3221E MAX3221ECTE+T MAX3221ECAE+T MAX3221EEAE-T MAX3232E MAX3243E ADM3232E RS-232 transceiver interface IC EIA/TIA-232 V.28 V.24 AutoShutdown automatic wakeup ESD protection charge-pump circuit TTL/CMOS logic interface TQFN-16 QFN package family surface-mount package industrial serial communication RoHS 250 kbps data rate
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示