MC9S08AW60MPUE557 - 8-bit HCS08 MCU 60KB Flash 40MHz LQFP-64
Артикул: MC9S08AW60MPUE557 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.5 | $9,50 |
| 10 | $8.55 | $85,50 |
| 100 | $7.62 | $762,00 |
| 500 | $6.85 | $3.425,00 |
| 1.000 | $6.1 | $6.100,00 |
MC9S08AW60MPUE557 Обзор
Background knowledge: An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, RAM, Flash program memory, and peripherals on one silicon die. The HCS08 core is NXP's enhanced 8-bit architecture succeeding the legacy HC08, adding the BGND instruction and a single-wire background debug mode interface that simplifies in-circuit programming and debugging. The MC9S08AW60 belongs to the AW sub-family of low-cost, high-performance HCS08 microcontrollers designed for cost-sensitive motor-control, appliance, and industrial-control applications, fitting the broader microcontroller -> embedded controller -> semiconductor taxonomy.
Key features include a 40 MHz CPU clock with a 20 MHz internal bus frequency, 60 KB (60K x 8) Flash, 4 KB RAM, 38 to 64 programmable I/O lines (package-dependent), and integrated peripherals including ADC, PWM, SCI, SPI, and I2C. The device supports a -40C to +85C industrial operating temperature range and includes on-chip voltage regulator, low-voltage detection, and watchdog timer for system reliability. The single-wire background debug mode (BDM) interface enables in-circuit flash programming and real-time debug without requiring additional program memory or pin resources.
The HCS08 core uses a von Neumann architecture with a 16-bit stack pointer, 16-bit index registers (H:X), and an enhanced instruction set that improves code density over the legacy HC08. The on-chip voltage regulator generates the internal logic supply from the external 2.7 V to 5.5 V input, simplifying power design. Flash memory supports in-application reprogramming via the BDM interface, enabling firmware updates in the field.
Typical applications include industrial control systems, automotive body electronics, appliance motor control, HVAC controllers, and sensor-interface modules. The wide peripheral set also fits building automation, security panels, and low-cost consumer devices.
Designers should evaluate supply decoupling (0.1 uF plus bulk 1 uF to 10 uF ceramic), BDM interface pin protection, and PCB layout for the ADC analog input traces. The 64-LQFP package allows easy hand-soldering and prototyping, while the 2.7 V minimum supply enables direct Li-ion or 3.3 V system-rail operation.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and engineering teams a single place to assess the MC9S08AW60MPUE557 for new designs and existing platform maintenance.
Аналоги без доработки для MC9S08AW60MPUE557 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S08AW60MPUE557 (тот же форм-фактор и посадочное место) — отличается по Package, Core Processor, Program Memory Size, RAM Size, Instruction Set.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC9S08AW60CPUE
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
Уточнить цену
Открыть даташит →MC9S08AW48CPUE
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
Уточнить цену
Открыть даташит →MC9S08AW32CPUE
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$6.1 / шт.
Открыть даташит →MC9S08AW16CPUE
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.2 / шт.
Открыть даташит →MC9S08AW60MFGE
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
S9S08AW60E7MFGE
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9S08AW60MPUE557 Максимальные параметры и электрические характеристики
| Core Architecture | HCS08 (enhanced S08) |
| Разрядность шины данных | 8-bit |
| CPU Clock Speed | 40 MHz |
| Internal Bus Frequency | 20 MHz |
| Program Memory (Flash) | 60 KB (60K x 8) |
| RAM | 4 KB |
| Рабочее напряжение питания | 2.7 V to 5.5 V |
| I/O Pins | 38 (per digchip datasheet); 64 programmable I/O lines per microchipusa |
| Корпус | 64-LQFP (10x10 mm) |
| Тип монтажа | Surface Mount |
| Serial Interfaces | SCI, SPI, I2C (per NXP family description) |
| Debug Interface | Single-wire Background Debug Mode (BDM) |
Конфигурация выводов MC9S08AW60MPUE557
| Контакт 1 | PTD0 — Port D I/O bit 0 (shared with BKGD/MS on some AW family variants) |
| Контакт 2 | PTD1 — Port D I/O bit 1 |
| Контакт 3 | VDD — Supply voltage (2.7 V to 5.5 V) |
| Контакт 4 | VSS — Ground |
| Контакт 5 | PTA0 — Port A I/O bit 0 / TCLK input |
| Контакт 6 | PTA1 — Port A I/O bit 1 |
| Контакт 7 | PTA2 — Port A I/O bit 2 |
| Контакт 8 | PTA3 — Port A I/O bit 3 |
| Контакт 9 | PTA4 — Port A I/O bit 4 |
| Контакт 10 | PTA5 — Port A I/O bit 5 |
| Контакт 11 | PTA6 — Port A I/O bit 6 |
| Контакт 12 | PTA7 — Port A I/O bit 7 |
| Контакт 13 | PTB0 — Port B I/O bit 0 / ADC channel |
| Контакт 14 | PTB1 — Port B I/O bit 1 / ADC channel |
| Контакт 15 | PTB2 — Port B I/O bit 2 / ADC channel |
| Контакт 16 | PTB3 — Port B I/O bit 3 / ADC channel |
| Контакт 17 | PTB4 — Port B I/O bit 4 / ADC channel |
| Контакт 18 | PTB5 — Port B I/O bit 5 / ADC channel |
| Контакт 19 | PTB6 — Port B I/O bit 6 / ADC channel |
| Контакт 20 | PTB7 — Port B I/O bit 7 / ADC channel |
| Контакт 21 | PTC0 — Port C I/O bit 0 / SPI signal |
| Контакт 22 | PTC1 — Port C I/O bit 1 / SPI signal |
| Контакт 23 | PTC2 — Port C I/O bit 2 / SPI signal |
| Контакт 24 | PTC3 — Port C I/O bit 3 / SPI signal |
| Контакт 25 | PTC4 — Port C I/O bit 4 / SCI TX |
| Контакт 26 | PTC5 — Port C I/O bit 5 / SCI RX |
| Контакт 27 | PTC6 — Port C I/O bit 6 / I2C SCL |
| Контакт 28 | PTC7 — Port C I/O bit 7 / I2C SDA |
| Контакт 29 | VSS — Ground |
| Контакт 30 | VDD — Supply voltage |
| Контакт 31 | RESET — Active-low reset input |
| Контакт 32 | PTE0 — Port E I/O bit 0 / PWM channel |
| Контакт 33 | PTE1 — Port E I/O bit 1 / PWM channel |
| Контакт 34 | PTE2 — Port E I/O bit 2 / PWM channel |
| Контакт 35 | PTE3 — Port E I/O bit 3 / PWM channel |
| Контакт 36 | PTE4 — Port E I/O bit 4 |
| Контакт 37 | PTE5 — Port E I/O bit 5 |
| Контакт 38 | PTE6 — Port E I/O bit 6 |
| Контакт 39 | PTE7 — Port E I/O bit 7 |
| Контакт 40 | PTF0 — Port F I/O bit 0 |
| Контакт 41 | PTF1 — Port F I/O bit 1 |
| Контакт 42 | PTF2 — Port F I/O bit 2 |
| Контакт 43 | PTF3 — Port F I/O bit 3 |
| Контакт 44 | PTF4 — Port F I/O bit 4 |
| Контакт 45 | PTF5 — Port F I/O bit 5 |
| Контакт 46 | PTF6 — Port F I/O bit 6 |
| Контакт 47 | PTF7 — Port F I/O bit 7 |
| Контакт 48 | PTG0 — Port G I/O bit 0 |
| Контакт 49 | PTG1 — Port G I/O bit 1 |
| Контакт 50 | PTG2 — Port G I/O bit 2 |
| Контакт 51 | PTG3 — Port G I/O bit 3 |
| Контакт 52 | PTG4 — Port G I/O bit 4 |
| Контакт 53 | PTG5 — Port G I/O bit 5 |
| Контакт 54 | PTG6 — Port G I/O bit 6 |
| Контакт 55 | PTG7 — Port G I/O bit 7 |
| Контакт 56 | PTH0 — Port H I/O bit 0 |
| Контакт 57 | PTH1 — Port H I/O bit 1 |
| Контакт 58 | PTH2 — Port H I/O bit 2 |
| Контакт 59 | PTH3 — Port H I/O bit 3 |
| Контакт 60 | PTH4 — Port H I/O bit 4 |
| Контакт 61 | PTH5 — Port H I/O bit 5 |
| Контакт 62 | PTH6 — Port H I/O bit 6 |
| Контакт 63 | PTH7 — Port H I/O bit 7 |
| Контакт 64 | BKGD/MS — Background Debug Mode / Mode Select |
Типичное применение
MC9S08AW60MPUE557 подходит для 6 применениеs: Industrial Motor Control, Appliance Control (White Goods), Automotive Body Electronics, HVAC Climate Controllers, Security and Fire-Alarm Panels, Sensor-Interface Modules.
Industrial Motor Control
The MC9S08AW60MPUE557 fits industrial motor-control designs where its 40 MHz HCS08 core runs FOC or trapezoidal commutation loops at typical PWM frequencies of 10-20 kHz. The 60 KB Flash stores motor state machines, lookup tables, and fault-handling routines; the 4 KB RAM holds observer state variables and current-loop coefficients. Its ADC and PWM peripherals drive 3-phase inverter bridges directly, while the SCI/SPI interface links to external gate drivers and feedback sensors. Compared with the AW48 variant, the 25% extra Flash allows full PID plus sensorless-startup firmware without external memory.
Рекомендуется
Appliance Control (White Goods)
The MC9S08AW60MPUE557 targets washing-machine, dishwasher, and refrigerator control boards where the HCS08 core handles user-interface, motor-driver sequencing, and safety-monitoring tasks. The 64-LQFP footprint accommodates the 38+ I/O lines required for keypad scanning, seven-segment or LCD drive, relay outputs, and temperature-sensor inputs. Its 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V system rails common in white goods. Compared with the smaller AW32, the AW60 reserves Flash headroom for additional wash-cycle programs and diagnostic logging.
Рекомендуется
Automotive Body Electronics
The MC9S08AW60MPUE557 supports automotive body-control modules including door-lock controllers, seat-position memory, and lighting drivers. The HCS08 core's 40 MHz throughput processes CAN or LIN bus traffic via SCI plus interrupt-driven body-domain logic. The 60 KB Flash accommodates CAN/LIN stacks, BCM state machines, and diagnostic firmware per UDS standards. Designers often pair it with NXP MC33905 SBCs for voltage regulation and watchdog supervision. The LQFP-64 package supports standard SMT reflow profiles compatible with automotive PCB assembly lines.
Рекомендуется
HVAC Climate Controllers
The MC9S08AW60MPUE557 serves HVAC controller boards where the HCS08 core runs temperature-control loops, fan-speed PID, and user-interface tasks. Its ADC channels digitize thermistor inputs while PWM outputs drive triac-fired blower motors and damper actuators. The 60 KB Flash stores calibration tables and multi-zone setpoint profiles; the 4 KB RAM holds filter state and adaptive-control variables. Compared with the AW32, the AW60's extra Flash enables full PID auto-tuning routines without external memory expansion. The industrial temperature grade handles -40C to +85C environments.
Рекомендуется
Security and Fire-Alarm Panels
The MC9S08AW60MPUE557 is a strong match for intrusion-alarm and fire-alarm control panels where reliability and code-density matter more than raw CPU speed. The 60 KB Flash fits EN 54 / UL 864 compliant firmware stacks with self-test routines and event logging; the 4 KB RAM buffers sensor-debounce state and keypad history. Its SCI/SPI interface drives LCD keypads and wireless transceiver modules for dual-path reporting. Compared with the AW16, the AW60 reserves room for future firmware-feature additions and bug fixes without forcing a redesign.
Рекомендуется
Sensor-Interface Modules
The MC9S08AW60MPUE557 fits multi-sensor interface modules such as industrial-data-acquisition front-ends and IoT gateways where the HCS08 core aggregates analog and digital sensor data before forwarding to a host. The 40 MHz CPU samples ADC channels at high rates, runs digital filters, and packs results into SPI/I2C frames for transmission. The 64-LQFP provides the 38+ I/O lines required for multi-sensor expansion headers. Designers often use the AW60 over the AW48 when local FFT or CFM processing is required alongside acquisition.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S08AW60MPUE557 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S08AW60CPUE | MC9S08AW48CPUE | MC9S08AW32CPUE | MC9S08AW16CPUE | MC9S08AW60MFGE | S9S08AW60E7MFGE |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10) | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same |
| Core | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz |
| Flash | 60 KB | 60 KB | 48 KB (-20%) | 32 KB (-47%) | 16 KB (-73%) | 60 KB | 60 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 2 KB (-50%) | 4 KB | 4 KB |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Debug Interface | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM |
| Param Match Score | 100% | 95% | 80% | 70% | 70% | 100% | 100% |
Ключевые отличия
- Largest Flash in the HCS08 AW60 sub-family (против MC9S08AW48CPUE)
- Same silicon as the canonical NXP MC9S08AW60 family (против MC9S08AW32CPUE)
- NXP/Freescale authorized stocking via Rochester Electronics (против MC9S08AW16CPUE)
Заметки по проектированию
Place a 0.1 uF ceramic decoupling capacitor as close as possible to each VDD/VSS pair (typically pins 3/4 and 29/30 on the LQFP-64). Add a bulk 1 uF to 10 uF ceramic on the main VDD rail to handle the 40 MHz core's switching transients. The internal voltage regulator generates the 1.8 V core supply from the external 2.7 V to 5.5 V input, so clean external decoupling directly impacts ADC and PWM analog noise performance.
Keep analog ADC input traces (PTA/PTB pins) short and routed away from high-frequency switching signals such as PWM outputs and clock traces to minimize ADC crosstalk. Use a ground plane under the LQFP-64 to provide low-impedance return paths; thermal relief pads on all 64 LQFP pins improve hand-soldering and inspection. For BDM programming, route the BKGD/MS pin (pin 64) to a 2-pin header with ESD protection for in-circuit programming access.
Do not exceed 5.5 V on any VDD pin or apply reverse polarity; the device has no reverse-battery protection. The single-wire BDM interface requires careful signal integrity - excessive capacitance on BKGD/MS prevents reliable programming. The internal Flash is rated for a finite erase/write cycle count - implement wear-leveling or external EEPROM for frequently updated parameters. Always configure the watchdog timer before enabling interrupts in production firmware.
Информация о соответствии
Compliance status not present in Verified Web Data. Industrial and Automotive industry support noted per NXP family datasheet; specific AEC-Q100 grade not confirmed in extracted snippets. RoHS/REACH/lead-free status to be verified against the NXP product page or distributor environmental documentation.