PCM1727E-2 - 24-Bit Stereo DAC with Dual PLL | Texas Instruments
部品番号: PCM1727E-2 ✓ 生産中PCM1727E-2 概要
An audio DAC converts digital PCM samples into left- and right-channel analog voltage signals suitable for amplification, mixing, or line-level output. The PCM1727E-2 belongs to the SoundPlus stereo DAC family, where the DAC core, digital reconstruction filter, and output amplifiers operate together to convert I2S-format audio data. Its programmable dual PLL supports multiple sampling frequencies, making it useful in systems that must accept several clock domains or source rates.
The 24-bit input interface supports high-resolution audio, while the 96 kHz maximum sampling frequency provides a useful margin for CD-quality and higher-rate digital audio paths. A 92 dB dynamic range defines the converter's signal-to-noise performance and helps preserve low-level musical detail. Integrating the output amplifier with the stereo DAC reduces the number of external active components required in many line-output designs.
The programmable dual PLL is the principal clock-management feature. By supporting multiple sampling frequencies, it allows one stereo DAC design to operate with different digital sources or system clock arrangements. Designers must still configure the serial interface, sample rate, filter characteristics, and analog output path correctly for the intended audio format.
Typical uses include stereo CD players, digital television audio outputs, home-theater equipment, multimedia speakers, USB or network audio interfaces, and embedded audio systems. The 24-pin SSOP package is also appropriate for compact consumer electronics where the converter must provide two analog channels without occupying multiple external codec packages.
For layout, place the digital interface and clock connections away from the analog output traces, provide a clean supply reference at the device, and follow the manufacturer datasheet's recommended decoupling and output-filter network. Correct grounding and short analog paths help preserve the converter's 92 dB dynamic-range capability in the finished system.
This product page combines the PCM1727E-2's core audio specifications, a package-aware comparison with PCM1727E, practical integration guidance, and focused selection criteria for engineers evaluating 24-bit, 96 kHz stereo DAC implementations.
ドロップイン代替品: PCM1727E-2 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PCM1727E-2 (同一形状・フットプリント) — 相違点: Integrated Functions.
PCM1727E
✅ ドロップイン価格はお問い合わせください
データシートを見る →PCM1727E-2 最大定格&電気的特性
| Product Type | Stereo audio digital-to-analog converter |
| Input Word Length | 24 bit |
| Maximum Sampling Frequency | 96 kHz |
| Dynamic Range | 92 dB |
| Digital Audio Interface | I2S |
| Channel Configuration | Stereo |
| Integrated Functions | Digital filter, stereo DAC, and output amplifier |
| Clock Architecture | Programmable dual PLL |
| ピン数 | 24 pins |
| パッケージ | 24-pin SSOP |
| 実装タイプ | Surface mount |
| 出力タイプ | Stereo analog audio output |
| RoHS ステータス | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
PCM1727E-2 24-pin ssop ピン配置ガイド
PCM1727E-2 (24-pin ssop パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: PCM1727E-2.
詳細は データシート をご参照ください。
主な用途
PCM1727E-2 の用途: 3 件s: 信号コンディショニング, データ収集, オーディオ処理.
信号コンディショニング
PCM1727E-2を使用したセンサー信号の増幅とフィルタリング。
データ収集
PCM1727E-2によるデジタル処理用のアナログ信号変換。
オーディオ処理
PCM1727E-2によるオーディオ信号の増幅と処理。
エンジニアリング参考データ: PCM1727E-2 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PCM1727E |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 24-pin SSOP | 24-pin SSOP |
| Product Type | Stereo audio DAC with programmable dual PLL | Stereo audio DAC with programmable dual PLL |
| Input Resolution | 24 bit | 24 bit |
| Maximum Sampling Frequency | 96 kHz | 96 kHz |
| Dynamic Range | 92 dB | 92 dB |
| Digital Audio Interface | I2S | I2S |
| Integrated Functions | Digital filter, stereo DAC, and output amplifier | Digital filter, stereo DAC, and output amplifier |
| Clock Architecture | Programmable dual PLL | Programmable dual PLL |
主な差別化要因
- Fully integrated stereo conversion path (vs PCM1727E)
- High-resolution direct digital audio conversion (vs PCM1727E)
- Compact surface-mount implementation (vs PCM1727E)
設計ノート
Separate the PCM1727E-2's I2S and clock routing from its stereo analog outputs. Follow the manufacturer datasheet's recommended component placement and pin assignments, keep analog traces short, and provide a direct return path to the device's ground reference. This reduces coupling from digital switching edges into the left and right output nodes and helps the finished design approach the converter's specified 92 dB dynamic range.
Apply the manufacturer datasheet's recommended supply bypassing directly at the appropriate power pins. The required capacitor values, voltage limits, and any analog and digital supply arrangement must be taken from the electrical-characteristics and application sections. Do not infer supply values from the 24-bit data rate or 96 kHz sampling frequency, because those describe data conversion performance rather than the permitted operating voltage.
Program the serial interface, sample rate, PLL configuration, and filter mode before interpreting the analog outputs. A valid I2S stream is not sufficient by itself: incorrect clock polarity, bit alignment, master-clock ratio, or filter selection can produce wrong output level, distortion, or unexpected channel behavior. Use the manufacturer datasheet's timing diagrams and initialization sequence for the selected operating mode.
コンプライアンス情報
No suffix-specific environmental or material-compliance declarations were identified for PCM1727E-2. Confirm the latest declarations and product status with Texas Instruments before production release.