PCM1727E-2 - 24-Bit Stereo DAC with Dual PLL | Texas Instruments
부품 번호: PCM1727E-2 ✓ 활성PCM1727E-2 개요
An audio DAC converts digital PCM samples into left- and right-channel analog voltage signals suitable for amplification, mixing, or line-level output. The PCM1727E-2 belongs to the SoundPlus stereo DAC family, where the DAC core, digital reconstruction filter, and output amplifiers operate together to convert I2S-format audio data. Its programmable dual PLL supports multiple sampling frequencies, making it useful in systems that must accept several clock domains or source rates.
The 24-bit input interface supports high-resolution audio, while the 96 kHz maximum sampling frequency provides a useful margin for CD-quality and higher-rate digital audio paths. A 92 dB dynamic range defines the converter's signal-to-noise performance and helps preserve low-level musical detail. Integrating the output amplifier with the stereo DAC reduces the number of external active components required in many line-output designs.
The programmable dual PLL is the principal clock-management feature. By supporting multiple sampling frequencies, it allows one stereo DAC design to operate with different digital sources or system clock arrangements. Designers must still configure the serial interface, sample rate, filter characteristics, and analog output path correctly for the intended audio format.
Typical uses include stereo CD players, digital television audio outputs, home-theater equipment, multimedia speakers, USB or network audio interfaces, and embedded audio systems. The 24-pin SSOP package is also appropriate for compact consumer electronics where the converter must provide two analog channels without occupying multiple external codec packages.
For layout, place the digital interface and clock connections away from the analog output traces, provide a clean supply reference at the device, and follow the manufacturer datasheet's recommended decoupling and output-filter network. Correct grounding and short analog paths help preserve the converter's 92 dB dynamic-range capability in the finished system.
This product page combines the PCM1727E-2's core audio specifications, a package-aware comparison with PCM1727E, practical integration guidance, and focused selection criteria for engineers evaluating 24-bit, 96 kHz stereo DAC implementations.
드롭인 대체품: PCM1727E-2 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PCM1727E-2 (동일 폼 팩터 및 풋프린트) — 차이점: Integrated Functions.
PCM1727E
✅ 드롭인가격 문의
데이터시트 보기 →PCM1727E-2 최대 정격 & 전기적 특성
| Product Type | Stereo audio digital-to-analog converter |
| Input Word Length | 24 bit |
| Maximum Sampling Frequency | 96 kHz |
| Dynamic Range | 92 dB |
| Digital Audio Interface | I2S |
| Channel Configuration | Stereo |
| Integrated Functions | Digital filter, stereo DAC, and output amplifier |
| Clock Architecture | Programmable dual PLL |
| 핀 수 | 24 pins |
| 패키지 | 24-pin SSOP |
| 실장 유형 | Surface mount |
| 출력 유형 | Stereo analog audio output |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
PCM1727E-2 24-pin ssop 핀 구성 가이드
PCM1727E-2(24-pin ssop 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PCM1727E-2.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PCM1727E-2 적합 용도: 3 애플리케이션s: 신호 컨디셔닝, 데이터 수집, 오디오 처리.
신호 컨디셔닝
PCM1727E-2을(를) 사용한 센서 신호 증폭 및 필터링.
데이터 수집
PCM1727E-2을(를) 사용한 디지털 처리를 위한 아날로그 신호 변환.
오디오 처리
PCM1727E-2을(를) 사용한 오디오 신호 증폭 및 처리.
엔지니어링 참조 데이터: PCM1727E-2 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PCM1727E |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 24-pin SSOP | 24-pin SSOP |
| Product Type | Stereo audio DAC with programmable dual PLL | Stereo audio DAC with programmable dual PLL |
| Input Resolution | 24 bit | 24 bit |
| Maximum Sampling Frequency | 96 kHz | 96 kHz |
| Dynamic Range | 92 dB | 92 dB |
| Digital Audio Interface | I2S | I2S |
| Integrated Functions | Digital filter, stereo DAC, and output amplifier | Digital filter, stereo DAC, and output amplifier |
| Clock Architecture | Programmable dual PLL | Programmable dual PLL |
주요 차별점
- Fully integrated stereo conversion path (vs PCM1727E)
- High-resolution direct digital audio conversion (vs PCM1727E)
- Compact surface-mount implementation (vs PCM1727E)
설계 노트
Separate the PCM1727E-2's I2S and clock routing from its stereo analog outputs. Follow the manufacturer datasheet's recommended component placement and pin assignments, keep analog traces short, and provide a direct return path to the device's ground reference. This reduces coupling from digital switching edges into the left and right output nodes and helps the finished design approach the converter's specified 92 dB dynamic range.
Apply the manufacturer datasheet's recommended supply bypassing directly at the appropriate power pins. The required capacitor values, voltage limits, and any analog and digital supply arrangement must be taken from the electrical-characteristics and application sections. Do not infer supply values from the 24-bit data rate or 96 kHz sampling frequency, because those describe data conversion performance rather than the permitted operating voltage.
Program the serial interface, sample rate, PLL configuration, and filter mode before interpreting the analog outputs. A valid I2S stream is not sufficient by itself: incorrect clock polarity, bit alignment, master-clock ratio, or filter selection can produce wrong output level, distortion, or unexpected channel behavior. Use the manufacturer datasheet's timing diagrams and initialization sequence for the selected operating mode.
규정 준수 정보
No suffix-specific environmental or material-compliance declarations were identified for PCM1727E-2. Confirm the latest declarations and product status with Texas Instruments before production release.