PCM1727E-2 - 24-Bit Stereo DAC with Dual PLL | Texas Instruments
料号: PCM1727E-2 ✓ 量产中PCM1727E-2 概述
An audio DAC converts digital PCM samples into left- and right-channel analog voltage signals suitable for amplification, mixing, or line-level output. The PCM1727E-2 belongs to the SoundPlus stereo DAC family, where the DAC core, digital reconstruction filter, and output amplifiers operate together to convert I2S-format audio data. Its programmable dual PLL supports multiple sampling frequencies, making it useful in systems that must accept several clock domains or source rates.
The 24-bit input interface supports high-resolution audio, while the 96 kHz maximum sampling frequency provides a useful margin for CD-quality and higher-rate digital audio paths. A 92 dB dynamic range defines the converter's signal-to-noise performance and helps preserve low-level musical detail. Integrating the output amplifier with the stereo DAC reduces the number of external active components required in many line-output designs.
The programmable dual PLL is the principal clock-management feature. By supporting multiple sampling frequencies, it allows one stereo DAC design to operate with different digital sources or system clock arrangements. Designers must still configure the serial interface, sample rate, filter characteristics, and analog output path correctly for the intended audio format.
Typical uses include stereo CD players, digital television audio outputs, home-theater equipment, multimedia speakers, USB or network audio interfaces, and embedded audio systems. The 24-pin SSOP package is also appropriate for compact consumer electronics where the converter must provide two analog channels without occupying multiple external codec packages.
For layout, place the digital interface and clock connections away from the analog output traces, provide a clean supply reference at the device, and follow the manufacturer datasheet's recommended decoupling and output-filter network. Correct grounding and short analog paths help preserve the converter's 92 dB dynamic-range capability in the finished system.
This product page combines the PCM1727E-2's core audio specifications, a package-aware comparison with PCM1727E, practical integration guidance, and focused selection criteria for engineers evaluating 24-bit, 96 kHz stereo DAC implementations.
直接替换替代料: PCM1727E-2 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PCM1727E-2 (相同外形与封装尺寸) ——差异在于 Integrated Functions.
PCM1727E-2 最大额定值与电气特性
| Product Type | Stereo audio digital-to-analog converter |
| Input Word Length | 24 bit |
| Maximum Sampling Frequency | 96 kHz |
| Dynamic Range | 92 dB |
| Digital Audio Interface | I2S |
| Channel Configuration | Stereo |
| Integrated Functions | Digital filter, stereo DAC, and output amplifier |
| Clock Architecture | Programmable dual PLL |
| 引脚数 | 24 pins |
| 封装 | 24-pin SSOP |
| 安装类型 | Surface mount |
| 输出类型 | Stereo analog audio output |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
PCM1727E-2 24-pin ssop 引脚配置指南
PCM1727E-2(24-pin ssop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: PCM1727E-2.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PCM1727E-2 适用于 3 应用s: 信号调理, 数据采集, 音频处理.
信号调理
使用 PCM1727E-2 放大和滤波传感器信号。
数据采集
使用 PCM1727E-2 将模拟信号转换为数字信号进行处理。
音频处理
使用 PCM1727E-2 进行音频信号放大和处理。
工程参考数据: PCM1727E-2 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PCM1727E |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 24-pin SSOP | 24-pin SSOP |
| Product Type | Stereo audio DAC with programmable dual PLL | Stereo audio DAC with programmable dual PLL |
| Input Resolution | 24 bit | 24 bit |
| Maximum Sampling Frequency | 96 kHz | 96 kHz |
| Dynamic Range | 92 dB | 92 dB |
| Digital Audio Interface | I2S | I2S |
| Integrated Functions | Digital filter, stereo DAC, and output amplifier | Digital filter, stereo DAC, and output amplifier |
| Clock Architecture | Programmable dual PLL | Programmable dual PLL |
关键差异点
- Fully integrated stereo conversion path (对比 PCM1727E)
- High-resolution direct digital audio conversion (对比 PCM1727E)
- Compact surface-mount implementation (对比 PCM1727E)
设计说明
Separate the PCM1727E-2's I2S and clock routing from its stereo analog outputs. Follow the manufacturer datasheet's recommended component placement and pin assignments, keep analog traces short, and provide a direct return path to the device's ground reference. This reduces coupling from digital switching edges into the left and right output nodes and helps the finished design approach the converter's specified 92 dB dynamic range.
Apply the manufacturer datasheet's recommended supply bypassing directly at the appropriate power pins. The required capacitor values, voltage limits, and any analog and digital supply arrangement must be taken from the electrical-characteristics and application sections. Do not infer supply values from the 24-bit data rate or 96 kHz sampling frequency, because those describe data conversion performance rather than the permitted operating voltage.
Program the serial interface, sample rate, PLL configuration, and filter mode before interpreting the analog outputs. A valid I2S stream is not sufficient by itself: incorrect clock polarity, bit alignment, master-clock ratio, or filter selection can produce wrong output level, distortion, or unexpected channel behavior. Use the manufacturer datasheet's timing diagrams and initialization sequence for the selected operating mode.
合规信息
No suffix-specific environmental or material-compliance declarations were identified for PCM1727E-2. Confirm the latest declarations and product status with Texas Instruments before production release.