PCM1727E-2 - 24-Bit Stereo DAC with Dual PLL | Texas Instruments
MPN: PCM1727E-2 ✓ 啟用中PCM1727E-2 概覽
An audio DAC converts digital PCM samples into left- and right-channel analog voltage signals suitable for amplification, mixing, or line-level output. The PCM1727E-2 belongs to the SoundPlus stereo DAC family, where the DAC core, digital reconstruction filter, and output amplifiers operate together to convert I2S-format audio data. Its programmable dual PLL supports multiple sampling frequencies, making it useful in systems that must accept several clock domains or source rates.
The 24-bit input interface supports high-resolution audio, while the 96 kHz maximum sampling frequency provides a useful margin for CD-quality and higher-rate digital audio paths. A 92 dB dynamic range defines the converter's signal-to-noise performance and helps preserve low-level musical detail. Integrating the output amplifier with the stereo DAC reduces the number of external active components required in many line-output designs.
The programmable dual PLL is the principal clock-management feature. By supporting multiple sampling frequencies, it allows one stereo DAC design to operate with different digital sources or system clock arrangements. Designers must still configure the serial interface, sample rate, filter characteristics, and analog output path correctly for the intended audio format.
Typical uses include stereo CD players, digital television audio outputs, home-theater equipment, multimedia speakers, USB or network audio interfaces, and embedded audio systems. The 24-pin SSOP package is also appropriate for compact consumer electronics where the converter must provide two analog channels without occupying multiple external codec packages.
For layout, place the digital interface and clock connections away from the analog output traces, provide a clean supply reference at the device, and follow the manufacturer datasheet's recommended decoupling and output-filter network. Correct grounding and short analog paths help preserve the converter's 92 dB dynamic-range capability in the finished system.
This product page combines the PCM1727E-2's core audio specifications, a package-aware comparison with PCM1727E, practical integration guidance, and focused selection criteria for engineers evaluating 24-bit, 96 kHz stereo DAC implementations.
直接替換替代品,適用於 PCM1727E-2 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PCM1727E-2 (相同外形與佔位) — 差異在於 Integrated Functions.
PCM1727E-2 最大額定值與電氣特性
| Product Type | Stereo audio digital-to-analog converter |
| Input Word Length | 24 bit |
| Maximum Sampling Frequency | 96 kHz |
| Dynamic Range | 92 dB |
| Digital Audio Interface | I2S |
| Channel Configuration | Stereo |
| Integrated Functions | Digital filter, stereo DAC, and output amplifier |
| Clock Architecture | Programmable dual PLL |
| 腳位數 | 24 pins |
| 封裝 | 24-pin SSOP |
| 安裝類型 | Surface mount |
| 輸出類型 | Stereo analog audio output |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
PCM1727E-2 24-pin ssop 腳位配置指南
PCM1727E-2(24-pin ssop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PCM1727E-2.
請參閱 資料表 以查看完整腳位配置。
典型應用
PCM1727E-2 適用於 3 應用s: 訊號調理, 資料擷取, 音訊處理.
訊號調理
使用 PCM1727E-2 放大與濾波感測器訊號。
資料擷取
使用 PCM1727E-2 將類比訊號轉換以供數位處理。
音訊處理
使用 PCM1727E-2 進行音訊訊號放大與處理。
工程參考資料,適用於 PCM1727E-2 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PCM1727E |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 24-pin SSOP | 24-pin SSOP |
| Product Type | Stereo audio DAC with programmable dual PLL | Stereo audio DAC with programmable dual PLL |
| Input Resolution | 24 bit | 24 bit |
| Maximum Sampling Frequency | 96 kHz | 96 kHz |
| Dynamic Range | 92 dB | 92 dB |
| Digital Audio Interface | I2S | I2S |
| Integrated Functions | Digital filter, stereo DAC, and output amplifier | Digital filter, stereo DAC, and output amplifier |
| Clock Architecture | Programmable dual PLL | Programmable dual PLL |
主要差異化特點
- Fully integrated stereo conversion path (對比PCM1727E)
- High-resolution direct digital audio conversion (對比PCM1727E)
- Compact surface-mount implementation (對比PCM1727E)
設計說明
Separate the PCM1727E-2's I2S and clock routing from its stereo analog outputs. Follow the manufacturer datasheet's recommended component placement and pin assignments, keep analog traces short, and provide a direct return path to the device's ground reference. This reduces coupling from digital switching edges into the left and right output nodes and helps the finished design approach the converter's specified 92 dB dynamic range.
Apply the manufacturer datasheet's recommended supply bypassing directly at the appropriate power pins. The required capacitor values, voltage limits, and any analog and digital supply arrangement must be taken from the electrical-characteristics and application sections. Do not infer supply values from the 24-bit data rate or 96 kHz sampling frequency, because those describe data conversion performance rather than the permitted operating voltage.
Program the serial interface, sample rate, PLL configuration, and filter mode before interpreting the analog outputs. A valid I2S stream is not sufficient by itself: incorrect clock polarity, bit alignment, master-clock ratio, or filter selection can produce wrong output level, distortion, or unexpected channel behavior. Use the manufacturer datasheet's timing diagrams and initialization sequence for the selected operating mode.
合規資訊
No suffix-specific environmental or material-compliance declarations were identified for PCM1727E-2. Confirm the latest declarations and product status with Texas Instruments before production release.