Texas Instruments

PCM1727E-2 - 24-Bit Stereo DAC with Dual PLL | Texas Instruments

N.º da peça: PCM1727E-2 ✓ Ativo
24-pin SSOP Package 96 kHz Speed
MOQ: 1 |

PCM1727E-2 Visão geral

Texas Instruments PCM1727E-2 is a stereo audio digital-to-analog converter with a programmable dual PLL, accepting 24-bit audio data and supporting sampling rates up to 96 kHz. It is housed in a 24-pin SSOP package and combines the digital filter, stereo DAC, and output amplifier in one device. The converter provides a 92 dB dynamic range for consumer and professional audio systems requiring a compact, integrated audio output stage.

An audio DAC converts digital PCM samples into left- and right-channel analog voltage signals suitable for amplification, mixing, or line-level output. The PCM1727E-2 belongs to the SoundPlus stereo DAC family, where the DAC core, digital reconstruction filter, and output amplifiers operate together to convert I2S-format audio data. Its programmable dual PLL supports multiple sampling frequencies, making it useful in systems that must accept several clock domains or source rates.

The 24-bit input interface supports high-resolution audio, while the 96 kHz maximum sampling frequency provides a useful margin for CD-quality and higher-rate digital audio paths. A 92 dB dynamic range defines the converter's signal-to-noise performance and helps preserve low-level musical detail. Integrating the output amplifier with the stereo DAC reduces the number of external active components required in many line-output designs.

The programmable dual PLL is the principal clock-management feature. By supporting multiple sampling frequencies, it allows one stereo DAC design to operate with different digital sources or system clock arrangements. Designers must still configure the serial interface, sample rate, filter characteristics, and analog output path correctly for the intended audio format.

Typical uses include stereo CD players, digital television audio outputs, home-theater equipment, multimedia speakers, USB or network audio interfaces, and embedded audio systems. The 24-pin SSOP package is also appropriate for compact consumer electronics where the converter must provide two analog channels without occupying multiple external codec packages.

For layout, place the digital interface and clock connections away from the analog output traces, provide a clean supply reference at the device, and follow the manufacturer datasheet's recommended decoupling and output-filter network. Correct grounding and short analog paths help preserve the converter's 92 dB dynamic-range capability in the finished system.

This product page combines the PCM1727E-2's core audio specifications, a package-aware comparison with PCM1727E, practical integration guidance, and focused selection criteria for engineers evaluating 24-bit, 96 kHz stereo DAC implementations.

Alternativas drop-in para PCM1727E-2 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com PCM1727E-2 (mesmo formato e footprint) — diferindo em Integrated Functions.

Texas Instruments
Integrated Functions: Digital filter and output amplifier
Comparar com PCM1727E-2 →

PCM1727E

✅ Drop-In
Texas Instruments
📦 24-pin SSOP
Stereo audio digital-to-analog converter · Texas Instruments · 24 bit · 96 kHz · I2S · 92 dB · 2 channels · Programmable dual PLL

Consulte o preço

Ver ficha técnica →

PCM1727E-2 Classificações máximas e características elétricas

Product Type Stereo audio digital-to-analog converter
Input Word Length 24 bit
Maximum Sampling Frequency 96 kHz
Dynamic Range 92 dB
Digital Audio Interface I2S
Channel Configuration Stereo
Integrated Functions Digital filter, stereo DAC, and output amplifier
Clock Architecture Programmable dual PLL
Número de pinos 24 pins
Encapsulamento 24-pin SSOP
Tipo de montagem Surface mount
Tipo de saída Stereo analog audio output
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Guia de Configuração de Pinos do PCM1727E-2 24-pin ssop

Configuração de pinos para PCM1727E-2 (pacote 24-pin ssop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 24-pin ssop para PCM1727E-2

Nenhum dado detalhado de pinagem disponível para PCM1727E-2.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

PCM1727E-2 é adequado para 3 aplicaçãos: Condicionamento de sinal, Aquisição de dados, Processamento de áudio.

📊

Condicionamento de sinal

Amplificação e filtragem de sinais de sensores usando PCM1727E-2.

📈

Aquisição de dados

Conversão de sinais analógicos para processamento digital com PCM1727E-2.

🎧

Processamento de áudio

Amplificação e processamento de sinais de áudio com PCM1727E-2.

What are the key specifications of PCM1727E-2 that engineers should know?
The PCM1727E-2 is a stereo 24-bit audio DAC supporting sampling frequencies up to 96 kHz, with a 92 dB dynamic range and a programmable dual PLL. It integrates the digital filter, stereo converter, and output amplifiers in a 24-pin SSOP package. According to the manufacturer datasheet, the I2S-compatible digital input and integrated output stage make it suitable for compact stereo digital-audio products where both converter functionality and clock flexibility are required.
Where can I download the PCM1727E-2 datasheet PDF?
The PCM1727E-2 datasheet is available through the PCM1727E documentation listed on this page. It identifies the device as a stereo digital-to-analog converter with a programmable dual PLL, 24-bit input support, 96 kHz maximum sampling frequency, and a 92 dB dynamic range. Use the manufacturer datasheet's pin-description table, electrical-characteristics tables, and typical application circuit when assigning PCB connections and external components.
Where can I find the PCM1727E-2 pinout?
The PCM1727E-2 uses a 24-pin SSOP package, and its complete pin assignments are defined in the manufacturer datasheet's pin-description table. The package diagram on this page cannot be populated with verified pin names because the manufacturer pin table was not included in the product record. Before layout release, assign every pin directly from that table and preserve the exposed-package, power, ground, clock, data, and analog-output requirements shown there.
What is the operating voltage of PCM1727E-2?
The PCM1727E-2's operating voltage and analog supply limits are defined in the manufacturer datasheet's electrical-characteristics tables, but the operating-voltage value is not reproduced in this product record. Check both the recommended operating conditions and absolute-maximum ratings before selecting regulators or designing voltage sequencing. The 24-bit, 96 kHz, 92 dB dynamic-range specifications do not by themselves define the permitted supply range.
How does PCM1727E-2 compare with PCM1727E?
PCM1727E-2 and PCM1727E belong to the same Texas Instruments PCM1727 stereo-DAC family and share the core 24-bit, 96 kHz, programmable-dual-PLL functionality. PCM1727E-2 is the identified 24-pin SSOP ordering designation, while PCM1727E is the broader family listing. Confirm the exact suffix, package drawing, pin assignments, and electrical limits against the manufacturer datasheet before treating PCM1727E as a board-level replacement.
When should I choose PCM1727E-2 instead of PCM1727E?
Choose PCM1727E-2 when the design specifically requires the verified 24-pin SSOP ordering designation and the PCM1727 family's 24-bit, 96 kHz stereo-DAC functions. Choose PCM1727E only after confirming that its exact package suffix, pinout, clock interface, supply requirements, and output circuitry are identical for the intended board. The family relationship alone is not sufficient evidence for an unconditional production substitution.
Is PCM1727E-2 suitable for a 96 kHz stereo audio application?
The PCM1727E-2 is suitable for 96 kHz stereo audio because the manufacturer specifies 24-bit input data and sampling frequencies up to 96 kHz. Its stereo DAC, integrated digital filter, output amplifiers, and programmable dual PLL support a complete conversion path. Confirm clock ratios, filter mode, supply levels, and analog output loading in the datasheet because those implementation details determine whether the full-rate operating point meets the system specification.
What can replace PCM1727E-2 in a drop-in design?
PCM1727E is the closest same-family candidate identified for review, but it should be treated as a conditional replacement rather than an automatic drop-in. A production substitution requires confirmation of the exact suffix, identical 24-pin SSOP footprint, pin-to-pin connections, supply range, clock behavior, digital filters, analog output, and lifecycle status. No additional same-package alternatives were established with enough technical detail to recommend them as drop-in replacements.
Is PCM1727E-2 the same as PCM1727E?
PCM1727E-2 is the specified 24-pin SSOP ordering designation within Texas Instruments' PCM1727 stereo-DAC family, while PCM1727E is identified as a broader family member. Both listings describe a stereo DAC with a programmable dual PLL. They are not proven identical for every board until the suffix-specific package drawing, pin table, and electrical characteristics have been compared.
What is the best cross-brand equivalent for PCM1727E-2?
No cross-brand drop-in equivalent was established for the PCM1727E-2 with sufficient pin-level and parametric verification. A cross-brand replacement would need the same 24-pin SSOP footprint, pin-to-pin assignments, compatible supply voltage, equivalent I2S timing, comparable 24-bit and 96 kHz operation, and closely matched digital-filter and analog-output behavior. Use a parametric cross-reference search, then validate every candidate against the manufacturer datasheet before PCB substitution.
Where can I buy PCM1727E-2 online?
Use the Request a Quote form on this page to request PCM1727E-2 pricing, current availability, and lead time. The device is listed as a Texas Instruments 24-bit stereo audio DAC with I2S input, 96 kHz support, and a 24-pin SSOP package. Request the exact suffix PCM1727E-2 when contacting the supplier so that package, reel, and qualification requirements are not confused with other PCM1727 family order codes.
What is the price of PCM1727E-2?
The current PCM1727E-2 price is obtained through the Request a Quote form on this page rather than a static listing value. Quote requests should identify the exact MPN, required quantity, package form, and delivery destination. This approach also allows current stock and lead-time confirmation without relying on stale pricing or conflating PCM1727E-2 with the broader PCM1727E family listing.
What is the lead time for PCM1727E-2?
Submit PCM1727E-2 through the Request a Quote form on this page to obtain a current lead-time commitment. Lead time can vary with order quantity, manufacturing availability, packaging, and destination, so it should be confirmed for the exact production quantity rather than inferred from a generic listing. Request the 24-pin SSOP order code and any required reel or tray format in the same request.
Is PCM1727E-2 in stock?
Current PCM1727E-2 stock status should be confirmed through the Request a Quote form on this page. The Request a Quote form is the appropriate channel for live inventory, minimum order quantity, and scheduled delivery information. Specify the required quantity and packaging details so the returned quotation reflects the intended production build rather than a generic sample request.
How should PCM1727E-2 be laid out for low-noise stereo audio output?
Place the PCM1727E-2 input and output capacitors, grounding, and analog routing according to the manufacturer datasheet's typical application circuit. Keep digital clock and I2S traces away from the analog outputs, use a low-impedance ground return, and avoid routing analog signals beneath noisy digital nets. The converter's 92 dB dynamic range establishes the core performance target, while final board noise depends on supply decoupling, grounding, and analog-output loading.

Dados de referência de engenharia para PCM1727E-2 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the PCM1727E-2 for a compact stereo digital-audio design that requires 24-bit input data, operation up to 96 kHz, a 92 dB dynamic range, and a programmable dual PLL. Its integrated digital filter, stereo DAC, and output amplifiers can simplify a line-output design compared with systems using separate converter and output-stage components. PCM1727E is the closest family candidate for review, but it should be selected only after its exact suffix-specific package, pinout, and electrical limits are confirmed against the board being reused. No cross-brand part should be treated as a drop-in replacement without a documented 24-pin SSOP footprint and pin-level compatibility review. For applications requiring specifications beyond the stated resolution, sample rate, dynamic range, or dual-PLL operation, use the manufacturer datasheet's full electrical characteristics to assess the design rather than relying on family-level descriptions alone.

Comparação com alternativas

Parâmetro Este produto PCM1727E
Brand Texas Instruments Texas Instruments
Package 24-pin SSOP 24-pin SSOP
Product Type Stereo audio DAC with programmable dual PLL Stereo audio DAC with programmable dual PLL
Input Resolution 24 bit 24 bit
Maximum Sampling Frequency 96 kHz 96 kHz
Dynamic Range 92 dB 92 dB
Digital Audio Interface I2S I2S
Integrated Functions Digital filter, stereo DAC, and output amplifier Digital filter, stereo DAC, and output amplifier
Clock Architecture Programmable dual PLL Programmable dual PLL

Principais diferenciais

  • Fully integrated stereo conversion path (vs PCM1727E)
  • High-resolution direct digital audio conversion (vs PCM1727E)
  • Compact surface-mount implementation (vs PCM1727E)

Notas de projeto

Separate the PCM1727E-2's I2S and clock routing from its stereo analog outputs. Follow the manufacturer datasheet's recommended component placement and pin assignments, keep analog traces short, and provide a direct return path to the device's ground reference. This reduces coupling from digital switching edges into the left and right output nodes and helps the finished design approach the converter's specified 92 dB dynamic range.

Apply the manufacturer datasheet's recommended supply bypassing directly at the appropriate power pins. The required capacitor values, voltage limits, and any analog and digital supply arrangement must be taken from the electrical-characteristics and application sections. Do not infer supply values from the 24-bit data rate or 96 kHz sampling frequency, because those describe data conversion performance rather than the permitted operating voltage.

Program the serial interface, sample rate, PLL configuration, and filter mode before interpreting the analog outputs. A valid I2S stream is not sufficient by itself: incorrect clock polarity, bit alignment, master-clock ratio, or filter selection can produce wrong output level, distortion, or unexpected channel behavior. Use the manufacturer datasheet's timing diagrams and initialization sequence for the selected operating mode.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No suffix-specific environmental or material-compliance declarations were identified for PCM1727E-2. Confirm the latest declarations and product status with Texas Instruments before production release.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

PCM1727E-2 datasheet PCM1727E-2 datasheet pdf PCM1727E-2 pinout PCM1727E-2 specifications PCM1727E-2 24 bit stereo DAC PCM1727E-2 96 kHz PCM1727E-2 SSOP-24 Texas Instruments PCM1727E-2 PCM1727E-2 equivalent PCM1727E-2 replacement PCM1727E-2 vs PCM1727E PCM1727E-2 price PCM1727E-2 stock PCM1727E-2 stereo audio application

Componentes & termos relacionados

Texas Instruments PCM1727E-2 PCM1727E stereo audio DAC digital-to-analog converter audio DAC PCM audio I2S 24-bit resolution 96 kHz sampling frequency 92 dB dynamic range programmable dual PLL digital filter integrated output amplifier 24-pin SSOP SSOP package family surface-mount package semiconductor compact electronics audio signal conversion
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ