TLV2761CD - 500 kHz RRIO Op Amp | Texas Instruments
部品番号: TLV2761CD ✓ 生産中TLV2761CD 概要
An operational amplifier, or op amp, is a voltage-controlled differential amplifier used to amplify, buffer, compare, filter, or reshape analog signals. The TLV2761 belongs to the rail-to-rail input and output amplifier family, where the input common-mode range and output swing approach the supply rails. This makes the device useful where signals can occupy much of the available supply range and where conventional input stages would clip.
Key features include 500 kHz gain-bandwidth product, operation down to 1.8 V, and approximately 20 µA quiescent current. The rail-to-rail input stage supports direct sensing of low-amplitude signals, while the rail-to-rail output stage provides useful dynamic output range. These characteristics make the amplifier appropriate for battery-powered sensing, low-voltage instrumentation, buffered analog measurement, and embedded control systems.
The TLV2761CD uses a CMOS-based operational-amplifier architecture optimized for low-voltage operation. A single circuit is sufficient when an application requires one independent gain stage, comparator-style buffering, or a basic active filter. The 500 kHz bandwidth supports moderate-frequency signal paths without requiring the higher current and power consumption associated with faster general-purpose amplifiers.
Typical uses include sensor signal conditioning, low-voltage ADC drivers, portable measurement instruments, industrial process monitoring, battery-operated diagnostic equipment, and embedded control interfaces. The low quiescent current is particularly valuable in designs that spend substantial time between measurement events because the amplifier's own supply demand remains small during those intervals.
When designing around the TLV2761CD, verify the required output swing against the actual load and supply voltage. Decoupling capacitors should be placed close to the supply pins, and sensitive analog inputs should be routed away from switching nodes. Because rail-to-rail operation can involve input or output transition regions, input and output signals should be evaluated across the full operating range rather than only at the nominal supply voltage.
This page combines the manufacturer product information with package, ordering, drop-in comparison, application guidance, and design considerations. The resulting reference helps engineers evaluate the TLV2761CD for low-voltage analog systems while keeping footprint compatibility and circuit-level constraints in view.
ドロップイン代替品: TLV2761CD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TLV2761CD (同一形状・フットプリント) — 相違点: Amplifier Type, Operating Temperature Range, Package, Input Common-Mode Range, Supply Voltage Range.
TLV2761ID
✅ ドロップイン価格はお問い合わせください
データシートを見る →TLV2761CDR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TLV2761IDR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TLV2761IDRG4
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TLV2761CDG4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
TLV2761CD 最大定格&電気的特性
| Number of Amplifiers | 1 circuit |
| Amplifier Type | Single operational amplifier |
| Gain-Bandwidth Product | 500 kHz |
| Maximum Recommended Supply Voltage | 3.6 V |
| Minimum Operating Supply Voltage | 1.8 V |
| 静止電流 | 20 µA |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| 動作温度範囲 | 0 °C to 70 °C |
| パッケージ | 8-pin SOIC (D) |
| Package Width | 3.90 mm |
| Lead Pitch | 1.27 mm |
| 実装タイプ | Surface mount |
TLV2761CD 3.90 mm ピン配置ガイド
TLV2761CD (3.90 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: TLV2761CD.
詳細は データシート をご参照ください。
主な用途
TLV2761CD の用途: 6 件s: Battery-Powered Sensor Signal Conditioning, Low-Voltage ADC Input Driver, Portable Measurement Instrumentation, Industrial Process Monitoring, Embedded Control Signal Buffering, Battery-Operated Diagnostic Equipment.
Battery-Powered Sensor Signal Conditioning
The TLV2761CD suits low-voltage sensor conditioning because it operates from 1.8 V, consumes approximately 20 µA in the quiescent state, and accepts rail-to-rail input voltages. Place the amplifier directly between a sensor and an ADC input to amplify weak bipolar or unipolar signals without requiring a higher supply voltage. Its 500 kHz gain-bandwidth product supports moderate-bandwidth sensing, while the low quiescent current helps preserve battery life between measurements. Confirm the sensor output range, ADC input range, and required closed-loop gain before selecting resistor values.
おすすめ
Low-Voltage ADC Input Driver
The TLV2761CD can provide a rail-to-rail input and output interface between a low-voltage sensor network and an ADC. Its 1.8 V minimum operating voltage supports compact systems, and the 500 kHz gain-bandwidth product allows useful signal bandwidth at modest closed-loop gains. The approximately 20 µA quiescent current is favorable for portable acquisition systems. Confirm ADC settling requirements, input capacitance, allowable noise, and output-voltage headroom because a rail-to-rail output does not guarantee full rail-to-rail swing at every load.
おすすめ
Portable Measurement Instrumentation
The TLV2761CD is appropriate for portable measurement instruments where supply capacity is limited and signal integrity must be maintained near the supply rails. The rail-to-rail input stage reduces clipping when the measured signal approaches either supply limit, while the rail-to-rail output stage increases usable dynamic range. Low quiescent current of approximately 20 µA and operation down to 1.8 V help reduce system power. Validate the complete measurement chain under minimum supply voltage, maximum source impedance, temperature extremes, and the required input bandwidth.
おすすめ
Industrial Process Monitoring
The TLV2761CD can amplify low-level process signals in compact industrial monitoring equipment when the design operates within its 0 °C to 70 °C commercial range. Rail-to-rail input operation accommodates sensor outputs near the supply rails, and the 500 kHz gain-bandwidth product handles signals beyond static DC measurement. Low quiescent current helps when many sensing channels are active. For installations with wider temperature requirements, select the TLV2761ID and verify its complete electrical characteristics before release.
おすすめ
Embedded Control Signal Buffering
The TLV2761CD can buffer a control or feedback signal between a sensor, comparator, and embedded controller. Its approximately 20 µA quiescent current fits compact control systems, and rail-to-rail input and output behavior provides flexibility when logic-like signals occupy much of the available voltage range. The 500 kHz gain-bandwidth product supports moderate-frequency feedback paths. Confirm stability with the selected capacitor values, source impedance, and load, and keep sensitive input routing away from switching circuitry.
おすすめ
Battery-Operated Diagnostic Equipment
The TLV2761CD supports compact diagnostic devices that amplify low-level physiological or equipment-monitoring signals from a 1.8 V or higher supply. Its low approximately 20 µA quiescent current reduces standby demand, while rail-to-rail operation improves usable signal range in compact analog sections. The 500 kHz gain-bandwidth product is adequate for many low-frequency diagnostic waveforms and modest anti-aliasing requirements. Validate noise, offset, electrode or sensor loading, patient or operator isolation requirements, and applicable regulatory requirements before using it in medical equipment.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TLV2761CD — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TLV2761ID | TLV2761CDR | TLV2761IDR | TLV2761IDRG4 | TLV2761CDG4 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Gain-Bandwidth Product | 500 kHz | 500 kHz | 500 kHz | 500 kHz | 500 kHz | 500 kHz |
| Minimum Operating Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Maximum Recommended Supply Voltage | 3.6 V | 3.6 V | 3.6 V | 3.6 V | 3.6 V | 3.6 V |
| Quiescent Current | Approximately 20 µA | Approximately 20 µA | Approximately 20 µA | Approximately 20 µA | Approximately 20 µA | Approximately 20 µA |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Operating Temperature Range | 0 °C to 70 °C | Industrial temperature range; exact limits require datasheet confirmation | 0 °C to 70 °C | Industrial temperature range; exact limits require datasheet confirmation | Industrial temperature range; exact limits require datasheet confirmation | 0 °C to 70 °C |
主な差別化要因
- Combines low-voltage operation with moderate signal bandwidth (vs TLV2761ID)
- Defined commercial-temperature ordering option (vs TLV2761ID)
- Rail-to-rail signal range in an 8-pin SOIC footprint (vs TLV2761CDR)
設計ノート
Place the TLV2761CD close to the circuit elements that determine its behavior. Connect the supply-decoupling capacitor directly to the power and ground pins with short, low-impedance traces, and route the op-amp input and output nets away from clocks, switching regulators, and high-current return paths. Keep the feedback components close to the amplifier when the circuit uses resistive feedback, because excessive feedback-node capacitance can alter stability and bandwidth.
Design for a maximum recommended supply of 3.6 V while allowing operation down to 1.8 V. Verify the supply range across temperature and load, and check the input common-mode and output voltage limits at the minimum rail. Rail-to-rail input and output descriptions do not imply that the output reaches either rail exactly; leave the voltage margin required by the downstream load and by the application circuit.
Do not interpret the 500 kHz gain-bandwidth product as 500 kHz of closed-loop bandwidth at every gain setting. Actual bandwidth depends on noise gain, feedback resistance, source impedance, and load capacitance. Check the manufacturer stability and electrical-characteristics tables for the intended configuration. Also avoid driving long capacitive loads directly from the output unless the load and compensation arrangement have been evaluated.
For low-level sensor signals, use short input traces, guard techniques where appropriate, and a stable reference near the amplifier. The approximately 20 µA quiescent current makes the device attractive for portable systems, but input bias-current effects can become significant with high source impedance. Calculate the resulting offset using the actual sensor resistance and compare it with the application accuracy requirement.
コンプライアンス情報
The manufacturer ordering information identifies a commercial-temperature 8-pin SOIC ordering option, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not present in the referenced product information. AEC-Q100 qualification is not applicable to the identified standard TLV2761CD ordering option.