TMS320F28075PTPT - C2000 32-bit MCU, 120MHz, 512KB Flash, 176-HLQFP | Texas Instruments
部品番号: TMS320F28075PTPT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $16.42 | $16.42 |
| 10 | $14.78 | $147.80 |
| 100 | $12.96 | $1,296.00 |
| 250 | $11.84 | $2,960.00 |
| 1,000 | $10.37 | $10,370.00 |
TMS320F28075PTPT 概要
A C2000 Piccolo microcontroller is a 32-bit MCU family from Texas Instruments optimized for digital control of power, motor, and signal-conversion systems. The C28x CPU combines a single-cycle MAC DSP engine with a Harvard-style memory bus, while the FPU and TMU extend the architecture to IEEE-754 floating-point math and dedicated sine/cosine/arctangent acceleration used in field-oriented motor control. The Piccolo sub-family sits below the Delfino sub-family in the C2000 taxonomy (C2000 > Piccolo > C28x > DSP/MCU), balancing cost, integration, and real-time performance for industrial and renewable-energy applications.
Key features include 120 MHz CPU clock with single-cycle 32-bit MAC, 512 KB single-bank flash with ECC, configurable logic block (CLB) for custom glue logic, 12-bit and 16-bit ADC subsystems, sigma-delta filter (SDFM) interface for isolated current sensing, up to 20 PWM channels with high-resolution capability, control-law accelerator (CLA) for offloading the main CPU, and a CAN 2.0B / SPI / I2C / UART / LIN peripheral set. The on-chip SDFM accepts isolated sigma-delta bit-streams from TI's AMC-family current shunt monitors, enabling direct shunt-based phase-current measurement without an external modulator.
The architecture separates compute from control: the FPU/TMU-accelerated C28x handles state-machine and high-level control, while the CLA executes time-critical inner loops such as current sampling and PWM update at zero CPU overhead. The integrated SDFM, HRPWM, and comparator subsystems eliminate many external components required in discrete DSP + FPGA solutions.
Typical applications include solar micro-inverters and string inverters, servo and AC induction motor drives, on-board EV chargers, digital power supplies (PFC + LLC), industrial PLCs and process controllers, and wireless charging transmitters. The functional-safety documentation (FMEDA, safety manual) supports IEC 61508 SIL-2 and ISO 26262 ASIL-B target designs when the part is used with the corresponding TI safety software package.
Designers should note that pin-compatible C2000 supersets (F2837xS, F2837xD) can drop in for the F28075PTPT in the 176-HLQFP footprint, allowing upward migration to higher flash/CPU resources on identical PCB layouts. The 176-HLQFP powerPAD exposed pad must be soldered to a sufficiently large copper pour to keep junction temperature within the -40C to +105C operating range under full peripheral load.
This page synthesizes distributor stock, drop-in pin-compatible variants in the same 176-HLQFP footprint, and field application notes that complement the TI datasheet.
ドロップイン代替品: TMS320F28075PTPT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TMS320F28075PTPT （同一形状・フットプリント） — 相違点: Package, Communication Interfaces, Core, Functional Safety, Pin Count.
クイック比較ツール — 並列比較する代替部品を選択:
TMS320F28377SPTP
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TMS320F28377DPTP
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TMS320F28376SPTP
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TMS320F28375SPTP
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TMS320F28374SPTPS
✅ ドロップイン✓ 在庫あり
$11.6 / 個
データシートを見る →SAK-TC233LP-32F200N
✅ ドロップイン✓ 在庫あり
$7.35 / 個
データシートを見る →TMS320F28075PTPT 最大定格＆電気的特性
| Core Architecture | C28x 32-bit DSP/MCU |
| CPU Clock Speed | 120 MHz |
| Math Acceleration | FPU + TMU |
| Co-processor | CLA (Control Law Accelerator) |
| Program Flash | 512 KB (256K x 16) |
| Operating Voltage - Core | 1.2 V |
| Operating Voltage - I/O | 3.3 V |
| パッケージ | 176-HLQFP (PTP) powerPAD, 24x24 mm |
| ピン数 | 176 |
| 実装タイプ | Surface Mount |
| 動作温度範囲 | -40C to +105C |
| Sigma-Delta Filter (SDFM) | Yes (integrated) |
| Configurable Logic Block (CLB) | Yes |
| Functional Safety | FuSa-capable (IEC 61508/ISO 26262 docs available) |
| Communication Interfaces | CAN 2.0B, SPI, I2C, UART, LIN |
| RoHS ステータス | Compliant |
TMS320F28075PTPT 176-hlqfp (ptp) powerpad, 24x24 mm ピン配置ガイド
TMS320F28075PTPT (176-hlqfp (ptp) powerpad, 24x24 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: TMS320F28075PTPT.
詳細は データシート をご参照ください。
主な用途
TMS320F28075PTPT の用途: 6 件s: Solar Micro-Inverter and String Inverter Control, Industrial Servo and AC Motor Drives, On-Board EV Charger (OBC) and EV Charging Stations, Digital Power Supply (PFC + LLC / Phase-Shifted Full-Bridge), Wireless Charging Transmitter (Qi / Proprietary), Industrial PLC and Process Controller.
Solar Micro-Inverter and String Inverter Control
The TMS320F28075PTPT's 120 MHz C28x with FPU and TMU executes MPPT, anti-islanding, and grid-synchronization loops at sub-millisecond latency. The integrated HRPWM channels deliver 200 ps duty-cycle resolution for the DC-AC H-bridge, while the SDFM accepts isolated current bit-streams from TI AMC1306 modulators, eliminating the need for external ADCs. Compared with a Delfino F28335, the F28075PTPT reduces BOM cost by integrating the SDFM and CLB and supports IEC 62109-1 functional-safety compliance. A complete micro-inverter firmware stack (MPPT + grid-tie) fits within the 512 KB flash.
おすすめ
Industrial Servo and AC Motor Drives
For three-phase servo and induction motor drives, the TMS320F28075PTPT delivers field-oriented control (FOC) at up to 30 kHz current-loop bandwidth. The TMU accelerates Park/Inverse-Park and sin/cos transforms, freeing the C28x to handle state-machine and CANopen/EtherCAT communication. The CLA offloads the SVM and current-sampling tasks, leaving zero CPU overhead for the outer velocity loop. The 176-HLQFP exposes the maximum PWM/ADC pinout, supporting triple-shunt-up sensor feedback and incremental encoder interfaces.
おすすめ
On-Board EV Charger (OBC) and EV Charging Stations
The TMS320F28075PTPT supports both PFC and LLC stages in a single MCU for 3.3 kW-7.4 kW on-board chargers. The high-resolution PWM aligns the interleaved PFC phases, while the SDFM captures isolated current across the LLC transformer secondary for closed-loop regulation. TI's functional-safety collateral (FMEDA, safety manual) supports ISO 26262 ASIL-B target designs, a regulatory requirement for automotive traction and charging ECUs. Compared to a dual-MCU PFC+LLC architecture, the F28075PTPT BOM reduces part count by one full MCU.
おすすめ
Digital Power Supply (PFC + LLC / Phase-Shifted Full-Bridge)
Server and telecom PSUs use the TMS320F28075PTPT to implement digital PFC followed by an LLC or phase-shifted full-bridge stage. The 120 MHz C28x with FPU handles complex digital-compensator math (type-3, notch, adaptive gain) per switching cycle. The CLB configures hardware fault-protection logic (OCP, OVP) with sub-microsecond response, faster than CPU-based interrupts. Compared with an analog UCC25640 LLC controller, the F28075PTPT adds adaptive burst-mode and adaptive dead-time for higher light-load efficiency.
おすすめ
Wireless Charging Transmitter (Qi / Proprietary)
For automotive and consumer wireless charging pads, the TMS320F28075PTPT generates the precise 85-205 kHz Qi ASK/FSK modulated H-bridge drive and implements foreign-object detection (FOD) via Q-factor and power-loss measurements. The TMU accelerates the resonant-tank math at each PWM cycle, while the SDFM reads isolated resonant current and coil-voltage sense signals. The functional-safety collateral simplifies automotive Qi certification for in-cabin charging systems.
おすすめ
Industrial PLC and Process Controller
The TMS320F28075PTPT integrates analog and digital I/O for high-speed industrial PLC and process controller applications. With on-chip ADC, SDFM, CAN, SPI, I2C, and UART, it can replace a discrete DSP + FPGA solution in a single MCU. The CLA offloads high-rate encoder-counter and PWM-timestamp tasks, while the CLB implements custom deterministic logic for safety interlocks. TI provides certified IEC 61508 SIL-2 collateral, allowing the F28075PTPT to be used directly in safety-rated PLC backplanes.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TMS320F28075PTPT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TMS320F28377SPTP | TMS320F28377DPTP | TMS320F28376SPTP | TMS320F28375SPTP | TMS320F28374SPTP | SAK-TC233LP-32F200N |
|---|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Infineon Technologies |
| Package | 176-HLQFP (PTP) 24x24 mm | 176-HLQFP (PTP) - same | 176-HLQFP (PTP) - same | 176-HLQFP (PTP) - same | 176-HLQFP (PTP) - same | 176-HLQFP (PTP) - same | 176-HLQFP - same |
| CPU Clock | 120 MHz C28x | 200 MHz C28x | 200 MHz dual C28x | 200 MHz C28x | 200 MHz C28x | 200 MHz C28x | 200 MHz TriCore |
| Flash Memory | 512 KB | 1 MB | 1 MB | 1 MB | 1 MB | 512 KB | 2 MB |
| Math Acceleration | FPU + TMU + CLA | FPU + TMU + CLA | FPU + TMU + 2x CLA | FPU + TMU + CLA | FPU + TMU + CLA | FPU + TMU + CLA | FPU (TriCore) |
| Sigma-Delta Filter (SDFM) | Yes | Yes | Yes | Yes | Yes | Yes | No |
| Functional Safety Collateral | IEC 61508 / ISO 26262 docs | IEC 61508 / ISO 26262 docs | IEC 61508 / ISO 26262 docs | IEC 61508 / ISO 26262 docs | IEC 61508 / ISO 26262 docs | IEC 61508 / ISO 26262 docs | ISO 26262 ASIL-D (AURIX) |
| Core Architecture | C28x | C28x | C28x | C28x | C28x | C28x | TriCore AURIX |
主な差別化要因
- Pin-compatible upward migration to F2837xS and F2837xD in the same 176-HLQFP footprint （vs TMS320F28377SPTP)
- Functional-safety collateral at the same price tier as non-safety MCUs （vs TMS320F28335 (legacy Delfino))
- Integrated sigma-delta filter (SDFM) eliminates external modulator ICs （vs Generic C2000 Piccolo non-SDFM parts)
設計ノート
Estimated: at 1.2V core / 3.3V I/O with all peripherals active, the F28075PTPT typically draws 200-300 mA. With a 176-HLQFP powerPAD theta_JA of approximately 25 C/W on a 4-layer JEDEC test board, junction temperature rise is 5-7C above ambient at full load. For continuous 105C ambient operation, solder the exposed powerPAD to at least 2 square inches of copper pour on top and bottom layers tied by thermal vias. This is critical for motor-drive designs with high PWM duty cycles.
Place the 1.2V core decoupling capacitors (1x 10 uF + 4x 100 nF per VDD rail) within 5 mm of their respective pins. The 3.3V I/O decoupling follows the same rule, with one 10 uF bulk per power quadrant. Keep the SDFM bit-stream traces short and routed as 100 ohm differential pairs away from PWM and ADC switching nodes; SDFM jitter directly degrades current-sense accuracy.
Do not assume that F2837x firmware binary is drop-in compatible with F28075; the peripheral instances, CLA task table offsets, and GPIO mux mappings differ between the two families even when they share the 176-HLQFP footprint. Re-validate boot-ROM configuration, DCAN bit-timing registers, and the ePWM shadow-to-active load timing. Also confirm the JTAG TCK pin has a 10 kohm pull-up to 3.3V per TI datasheet, or scan-chain lock-up may occur at POR.
コンプライアンス情報
RoHS/REACH and lead-free confirmed per TI C2000 product family datasheet preface. AEC-Q100 automotive qualification is not applicable to this industrial-grade (-40C to +105C) part; for AEC-Q100 automotive variants, choose the TMS320F28075PTPQ1 suffix part if available.
