TMS320LF2407APGEA - 16-Bit DSP 40MHz 64KB Flash MCU | Texas Instruments
部品番号: TMS320LF2407APGEA ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $12.24 | $12.24 |
| 10 | $11.5 | $115.00 |
| 100 | $10.2 | $1,020.00 |
| 500 | $8.95 | $4,475.00 |
| 1,000 | $7.8 | $7,800.00 |
TMS320LF2407APGEA 概要
A digital signal processor (DSP) is a specialized microprocessor optimized for real-time digital signal processing such as filtering, modulation, and closed-loop control. The TMS320LF2407APGEA belongs to the C2000 family of DSP microcontrollers, which occupy the control-focused branch of the broader microcontroller and embedded processor hierarchy. This hybrid architecture combines DSP math throughput with microcontroller peripherals, enabling single-chip implementation of high-performance control loops.
Key features include the 16-bit C2xx core with a 32-bit accumulator and 16x16-bit hardware multiplier for single-cycle multiply-accumulate operations, two event managers (EVA and EVB) optimized for digital motor control, a CAN 2.0B communications module, SPI and SCI serial interfaces, up to 41 GPIO pins, a 10-bit ADC with 16 channels, a watchdog timer, and JTAG scan-based emulation for debugging. The flash memory supports in-system programming for field firmware updates.
The enhanced TMS320 architecture delivers deterministic interrupt latency and fast context switching, essential for current-loop control in power electronics. Functional pins are configurable as general-purpose inputs/outputs (GPIOs) for maximum design flexibility. According to the TI TMS320LF2407A datasheet, the 240xA family also includes ROM devices that are fully pin-to-pin compatible with their flash counterparts, easing migration between volume builds.
Typical applications include digital motor control (AC induction, BLDC, stepper), power conversion (inverters, UPS), industrial automation, and automotive networks using CAN. The event managers generate PWM with dead-band control for driving power switches, while the CAN module meets 2.0B specifications for networked systems.
Design tip: decouple the 3.3V rail thoroughly and keep the ADC reference layout quiet; provide JTAG access for programming and debug. For new designs, TI recommends the higher-performance C2000 F28x generation such as the TMS320F2808 or TMS320F28335.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-10-11.
ドロップイン代替品: TMS320LF2407APGEA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TMS320LF2407APGEA （同一形状・フットプリント） — 相違点: Package, Communication Interfaces, Core Architecture, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
TMS320LF2407APGES
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TMS320LF2407PGES
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TMS320LF2406APZA
✅ ドロップイン✓ 在庫あり
$10.75 / 個
データシートを見る →TMS320LF2403APGEA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TMS320F2812PGFA
✅ ドロップイン✓ 在庫あり
$7.6 / 個
データシートを見る →TMS320LF2407APGEA 最大定格＆電気的特性
| Core Architecture | C2xx (TMS320 DSP), 16-bit fixed-point |
| Operating Frequency | 40 MHz |
| Performance | 40 MIPS |
| Program Memory | 64 KB (32K x 16) Flash |
| Data Memory (RAM) | 2.5K x 16 (on-chip) |
| 電源電圧 | 3.3 V |
| パッケージ | 144-pin LQFP (PGE), 20x20 mm |
| ADC | 10-bit, 16 channels |
| GPIO Pins | 41 (multiplexed with peripherals) |
| Communication Interfaces | CAN 2.0B, SPI, SCI |
| Event Managers | 2 (EVA and EVB) with PWM, capture, QEP |
| Watchdog Timer | Yes |
| JTAG Debug | Yes (scan-based emulation) |
| 動作温度 | -40C to +85C |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
TMS320LF2407APGEA ピン構成
| ピン 1 | VSS — Ground |
| ピン 2 | PWM1 — Event Manager A PWM output 1 |
| ピン 3 | PWM2 — Event Manager A PWM output 2 |
| ピン 4 | PWM3 — Event Manager A PWM output 3 |
| ピン 5 | PWM4 — Event Manager A PWM output 4 |
| ピン 6 | PWM5 — Event Manager A PWM output 5 |
| ピン 7 | PWM6 — Event Manager A PWM output 6 |
| ピン 8 | VDD — 3.3V supply |
| ピン 9 | VSS — Ground |
| ピン 10 | CAP1/QEP1 — Capture input 1 / QEP input 1 |
| ピン 11 | CAP2/QEP2 — Capture input 2 / QEP input 2 |
| ピン 12 | CAP3 — Capture input 3 |
| ピン 13 | CAP4/QEP3 — Capture input 4 / QEP input 3 |
| ピン 14 | CAP5/QEP4 — Capture input 5 / QEP input 4 |
| ピン 15 | CAP6 — Capture input 6 |
| ピン 16 | TDIRA — Timer direction input A |
| ピン 17 | TCLKINA — Timer clock input A |
| ピン 18 | VSS — Ground |
| ピン 19 | ADCIN00 — ADC input channel 0 |
| ピン 20 | ADCIN01 — ADC input channel 1 |
| ピン 21 | ADCIN02 — ADC input channel 2 |
| ピン 22 | ADCIN03 — ADC input channel 3 |
| ピン 23 | ADCIN04 — ADC input channel 4 |
| ピン 24 | ADCIN05 — ADC input channel 5 |
| ピン 25 | ADCIN06 — ADC input channel 6 |
| ピン 26 | ADCIN07 — ADC input channel 7 |
| ピン 27 | ADCIN08 — ADC input channel 8 |
| ピン 28 | ADCIN09 — ADC input channel 9 |
| ピン 29 | ADCIN10 — ADC input channel 10 |
| ピン 30 | ADCIN11 — ADC input channel 11 |
| ピン 31 | ADCIN12 — ADC input channel 12 |
| ピン 32 | ADCIN13 — ADC input channel 13 |
| ピン 33 | ADCIN14 — ADC input channel 14 |
| ピン 34 | ADCIN15 — ADC input channel 15 |
| ピン 35 | VREFHI — ADC high reference voltage |
| ピン 36 | VREFLO — ADC low reference voltage |
| ピン 37 | VSSA — ADC analog ground |
| ピン 38 | VDDA — ADC analog supply |
| ピン 39 | TDIRB — Timer direction input B |
| ピン 40 | TCLKINB — Timer clock input B |
| ピン 41 | PWM7 — Event Manager B PWM output 7 |
| ピン 42 | PWM8 — Event Manager B PWM output 8 |
| ピン 43 | PWM9 — Event Manager B PWM output 9 |
| ピン 44 | PWM10 — Event Manager B PWM output 10 |
| ピン 45 | PWM11 — Event Manager B PWM output 11 |
| ピン 46 | PWM12 — Event Manager B PWM output 12 |
| ピン 47 | VSS — Ground |
| ピン 48 | VDD — 3.3V supply |
| ピン 49 | CANTX — CAN transmit output |
| ピン 50 | CANRX — CAN receive input |
| ピン 51 | SCITXD — SCI transmit output |
| ピン 52 | SCIRXD — SCI receive input |
| ピン 53 | SPICLK — SPI clock |
| ピン 54 | SPISIMO — SPI slave in master out |
| ピン 55 | SPISOMI — SPI slave out master in |
| ピン 56 | SPISTE — SPI slave transmit enable |
| ピン 57 | XF — External flag output |
| ピン 58 | VSS — Ground |
| ピン 59 | TMS — JTAG test mode select |
| ピン 60 | TDO — JTAG test data output |
| ピン 61 | TDI — JTAG test data input |
| ピン 62 | TCK — JTAG test clock |
| ピン 63 | TRST — JTAG test reset |
| ピン 64 | EMU0 — Emulation pin 0 |
| ピン 65 | EMU1 — Emulation pin 1 |
| ピン 66 | VDD — 3.3V supply |
| ピン 67 | VSS — Ground |
| ピン 68 | XA0 — External memory address line 0 |
| ピン 69 | XA1 — External memory address line 1 |
| ピン 70 | XA2 — External memory address line 2 |
| ピン 71 | XA3 — External memory address line 3 |
| ピン 72 | XA4 — External memory address line 4 |
| ピン 73 | XA5 — External memory address line 5 |
| ピン 74 | XA6 — External memory address line 6 |
| ピン 75 | XA7 — External memory address line 7 |
| ピン 76 | XA8 — External memory address line 8 |
| ピン 77 | XA9 — External memory address line 9 |
| ピン 78 | XA10 — External memory address line 10 |
| ピン 79 | XA11 — External memory address line 11 |
| ピン 80 | XA12 — External memory address line 12 |
| ピン 81 | XA13 — External memory address line 13 |
| ピン 82 | XA14 — External memory address line 14 |
| ピン 83 | XA15 — External memory address line 15 |
| ピン 84 | VDD — 3.3V supply |
| ピン 85 | VSS — Ground |
| ピン 86 | XD0 — External memory data line 0 |
| ピン 87 | XD1 — External memory data line 1 |
| ピン 88 | XD2 — External memory data line 2 |
| ピン 89 | XD3 — External memory data line 3 |
| ピン 90 | XD4 — External memory data line 4 |
| ピン 91 | XD5 — External memory data line 5 |
| ピン 92 | XD6 — External memory data line 6 |
| ピン 93 | XD7 — External memory data line 7 |
| ピン 94 | XD8 — External memory data line 8 |
| ピン 95 | XD9 — External memory data line 9 |
| ピン 96 | XD10 — External memory data line 10 |
| ピン 97 | XD11 — External memory data line 11 |
| ピン 98 | XD12 — External memory data line 12 |
| ピン 99 | XD13 — External memory data line 13 |
| ピン 100 | XD14 — External memory data line 14 |
| ピン 101 | XD15 — External memory data line 15 |
| ピン 102 | VSS — Ground |
| ピン 103 | VDD — 3.3V supply |
| ピン 104 | XWE — External memory write enable |
| ピン 105 | XOE — External memory output enable |
| ピン 106 | XCS — External memory chip select |
| ピン 107 | XRDY — External memory ready |
| ピン 108 | IOPF0 — GPIO port F bit 0 |
| ピン 109 | IOPF1 — GPIO port F bit 1 |
| ピン 110 | IOPF2 — GPIO port F bit 2 |
| ピン 111 | IOPF3 — GPIO port F bit 3 |
| ピン 112 | IOPF4 — GPIO port F bit 4 |
| ピン 113 | IOPF5 — GPIO port F bit 5 |
| ピン 114 | IOPF6 — GPIO port F bit 6 |
| ピン 115 | IOPE0 — GPIO port E bit 0 |
| ピン 116 | IOPE1 — GPIO port E bit 1 |
| ピン 117 | IOPE2 — GPIO port E bit 2 |
| ピン 118 | IOPE3 — GPIO port E bit 3 |
| ピン 119 | IOPE4 — GPIO port E bit 4 |
| ピン 120 | IOPE5 — GPIO port E bit 5 |
| ピン 121 | IOPE6 — GPIO port E bit 6 |
| ピン 122 | IOPE7 — GPIO port E bit 7 |
| ピン 123 | VSS — Ground |
| ピン 124 | VDD — 3.3V supply |
| ピン 125 | IOPA0 — GPIO port A bit 0 |
| ピン 126 | IOPA1 — GPIO port A bit 1 |
| ピン 127 | IOPA2 — GPIO port A bit 2 |
| ピン 128 | IOPA3 — GPIO port A bit 3 |
| ピン 129 | IOPA4 — GPIO port A bit 4 |
| ピン 130 | IOPA5 — GPIO port A bit 5 |
| ピン 131 | IOPA6 — GPIO port A bit 6 |
| ピン 132 | IOPA7 — GPIO port A bit 7 |
| ピン 133 | IOPB0 — GPIO port B bit 0 |
| ピン 134 | IOPB1 — GPIO port B bit 1 |
| ピン 135 | IOPB2 — GPIO port B bit 2 |
| ピン 136 | IOPB3 — GPIO port B bit 3 |
| ピン 137 | IOPB4 — GPIO port B bit 4 |
| ピン 138 | IOPB5 — GPIO port B bit 5 |
| ピン 139 | IOPB6 — GPIO port B bit 6 |
| ピン 140 | IOPB7 — GPIO port B bit 7 |
| ピン 141 | IOPC0 — GPIO port C bit 0 |
| ピン 142 | IOPC1 — GPIO port C bit 1 |
| ピン 143 | IOPC2 — GPIO port C bit 2 |
| ピン 144 | IOPD0 — GPIO port D bit 0 |
主な用途
TMS320LF2407APGEA の用途: 6 件s: Digital Motor Control - AC Induction Drives, Brushless DC (BLDC) Motor Control, Power Conversion - Inverters and UPS, Industrial CAN Networked Controllers, Automotive ECU Prototyping, Stepper Motor and Servo Control.
Digital Motor Control - AC Induction Drives
The TMS320LF2407APGEA is widely used for AC induction motor control in industrial drives and appliance applications. Its two event manager modules (EVA and EVB) generate complementary PWM outputs with programmable dead-band control, directly driving the gate drivers of three-phase IGBT inverters. The 16-bit fixed-point C2xx core executes field-oriented control (FOC) algorithms at 40 MIPS, with sufficient bandwidth for current loops running at 10-20 kHz. The on-chip 16-channel 10-bit ADC samples motor phase currents and DC bus voltage with minimal latency. TI reference designs demonstrate the device controlling AC induction motors up to several kW with vector control and sensorless operation. The CAN 2.0B module enables integration into networked factory automation systems.
おすすめ
Brushless DC (BLDC) Motor Control
For BLDC and PMSM motor applications, the TMS320LF2407APGEA combines the event manager's PWM generation, quadrature encoder pulse (QEP) input, and ADC sampling in a single-chip solution. The hardware multiplier and 32-bit accumulator execute single-cycle MAC operations essential for fast sine/cosine computations used in sinusoidal commutation. At 40 MIPS, the device supports trapezoidal or sinusoidal commutation at switching frequencies up to 20 kHz with full torque loop closure. The 41 GPIO pins interface directly to Hall sensors, back-EMF amplifiers, and protection circuitry. TI's BLDC motor control kits historically used this part as the reference platform before migrating to F28x devices.
おすすめ
Power Conversion - Inverters and UPS
In uninterruptible power supplies (UPS), solar inverters, and DC-DC converters, the TMS320LF2407APGEA executes digital control loops with the deterministic interrupt response needed for switching frequencies above 20 kHz. The event managers generate synchronized PWM with dead-band control to prevent shoot-through in half-bridge and full-bridge topologies. The on-chip ADC monitors output voltage and current for closed-loop regulation, while the CAN module reports telemetry to system controllers. The 64 KB flash supports sophisticated MPPT algorithms for solar applications. The 3.3V supply simplifies integration with modern power-stage gate drivers. TI's UCD3138 and C2000 F28x families are successors for new designs.
おすすめ
Industrial CAN Networked Controllers
For distributed industrial automation systems communicating over CANopen or DeviceNet, the TMS320LF2407APGEA provides on-chip CAN 2.0B with hardware message filtering. The DSP core processes sensor data and executes control loops, while the CAN module handles networked communication at up to 1 Mbps. Functional pins configurable as GPIOs allow interfacing to a wide range of industrial sensors and actuators. The JTAG scan-based emulation port simplifies firmware development for production deployments. Industrial temperature grade (-40C to +85C) and 144-LQFP package support harsh factory environments. This combination makes the part suitable for programmable logic controllers (PLCs) and distributed I/O modules.
おすすめ
Automotive ECU Prototyping
The TMS320LF2407APGEA serves automotive engine control unit (ECU) prototyping where its CAN 2.0B module meets vehicle network requirements. The device's real-time DSP performance supports engine management algorithms, transmission control, and chassis control loops. Operating temperature grade up to +85C handles under-hood environments, while the 144-LQFP package provides mechanical robustness. Note that the LF2407A is not AEC-Q100 qualified; for production automotive designs, migrate to Q1-qualified C2000 devices such as the TMS320F28335-Q1. The CAN module supports OBD-II diagnostic protocols for service tooling.
おすすめ
Stepper Motor and Servo Control
Two-phase and five-phase stepper motor controllers leverage the TMS320LF2407APGEA's event managers to generate precise microstepping PWM waveforms with up to 256 microsteps per full step. The QEP hardware captures encoder feedback for closed-loop servo control applications, executing PID control at deterministic update rates. The hardware multiplier accelerates sine table lookups used for microstep current shaping, while the 32-bit accumulator prevents overflow in long integration loops. The 41 GPIOs interface to multiple stepper drivers, limit switches, and emergency stop circuits. The part's combination of deterministic DSP performance and microcontroller integration makes it well-suited for multi-axis motion controllers.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TMS320LF2407APGEA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TMS320LF2407APGES | TMS320LF2407PGES | TMS320LF2406APZA | TMS320LF2403APGEA | TMS320F2812PGFA |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 144-LQFP (PGE), 20x20 mm | 144-LQFP (PGE) - same | 144-LQFP (PGE) - same | 144-LQFP (PZA) - same family | 144-LQFP (PGE) - same | 176-LQFP (PGF) - larger |
| Core Architecture | C2xx 16-bit DSP, 40 MIPS | C2xx 16-bit DSP, 40 MIPS | C2xx 16-bit DSP, 40 MIPS | C2xx 16-bit DSP, 40 MIPS | C2xx 16-bit DSP, 40 MIPS | C28x 32-bit, 150 MIPS |
| Program Flash | 64 KB (32K x 16) | 64 KB (32K x 16) | 64 KB (32K x 16) | 32 KB (-50%) | 16 KB (-75%) | 256 KB (+300%) |
| CAN 2.0B Module | Yes | Yes | Yes | Yes | No (2403A omits CAN) | Yes |
| Event Managers | 2 (EVA + EVB) | 2 (EVA + EVB) | 2 (EVA + EVB) | 2 (EVA + EVB) | 1 (EVA only) | 2 (EVA + EVB, enhanced) |
| ADC | 10-bit, 16 channels | 10-bit, 16 channels | 10-bit, 16 channels | 10-bit, 16 channels | 10-bit, 8 channels | 12-bit, 16 channels |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V (1.8V core) |
主な差別化要因
- Highest flash density in C240xA 144-LQFP family （vs TMS320LF2406APZA)
- Full CAN 2.0B plus dual event managers （vs TMS320LF2403APGEA)
- Mature C2xx ecosystem with extensive legacy code （vs TMS320F2812PGFA)
設計ノート
The TMS320LF2407APGEA requires a clean 3.3V supply with multiple decoupling capacitors placed close to VDD and VSS pin pairs. Use at least 0.1uF ceramic caps on each VDD pin and bulk 10-47uF tantalum or ceramic capacitors on the main supply rails. Estimate: with 41 GPIO toggling at 40 MHz, dynamic current can reach 200 mA. Keep the analog supply (VDDA) and analog ground (VSSA) isolated from the digital switching returns; place a ferrite bead between digital and analog 3.3V supply rails. Add a 10uF decoupling cap near the VREFHI pin to stabilize the ADC reference and reduce ADC sampling noise.
Provide a JTAG header footprint with TMS, TDI, TDO, TCK, TRST, EMU0, EMU1 signals plus ground, even if not populated in production. This enables in-system programming and field firmware updates using the TI XDS100 or XDS200 emulators. For the 144-LQFP 0.5 mm pitch, use a 4-layer PCB with continuous ground plane beneath the device to minimize noise coupling into the ADC inputs. Keep ADC traces short and routed away from PWM outputs and the CAN bus to prevent switching noise from corrupting analog measurements.
Do not apply 5V signals to any GPIO pin - the LF2407A is a 3.3V-only device and overvoltage will permanently damage the I/O cells. When designing for automotive environments, add TVS diodes on the CANH/CANL lines and series resistors on PWM outputs to limit inrush current into gate driver inputs. Ensure unused event manager outputs are configured as outputs driving low to minimize power consumption. For boot mode configuration, set the BOOT_EN and MP/MC pins correctly via pull-up or pull-down resistors; incorrect boot mode configuration is the most common startup failure for this part.
コンプライアンス情報
RoHS and REACH compliant per TI product page. Not AEC-Q100 qualified - choose TMS320F28035-Q1 or similar Q1 variants for production automotive applications.
