TPS65036x-Q1 - Automotive PMIC | Texas Instruments
部品番号: TPS65036x-Q1 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.5 | $7.50 |
| 10 | $6.75 | $67.50 |
| 100 | $5.95 | $595.00 |
| 500 | $5.25 | $2,625.00 |
| 1,000 | $4.75 | $4,750.00 |
TPS65036x-Q1 概要
What is a PMIC? A Power Management IC integrates multiple power conversion and regulation functions, such as voltage regulators, LDOs, and battery management, into a single chip. PMICs are essential in automotive electronics to generate the various supply rails required by processors, sensors, and peripherals from a single battery input, reducing board space, cost, and complexity. The TPS65036x-Q1 sits in the power management hierarchy, specifically in the automotive camera/radar/MCU power sub-system.
Key features include a wide-input-voltage BUCK1 converter supporting up to 35V, allowing direct connection to automotive 12V/24V battery systems. Two additional low-voltage buck converters and a 300mA LDO provide multiple rails. The device supports forced fixed-frequency PWM mode or AutoPFM mode for efficiency across load ranges, optional spread-spectrum modulation for EMI reduction, and low-power operation controlled via pin or I2C.
The TPS65036x-Q1 is AEC-Q100 qualified for automotive reliability, with an operating temperature range up to +125°C. The integrated sequencing and I2C interface enable flexible power management and diagnostics. The 24-pin VQFN package with a 0.5mm pitch and 3.5x3.5mm footprint minimizes PCB area, critical in space-constrained camera modules.
Typical applications include automotive camera modules, radar units, and MCU power supplies in ADAS systems, where multiple regulated rails are needed from a single automotive battery. The device also supports infotainment and sensor fusion systems requiring low-noise, reliable power.
When designing with the TPS65036x-Q1, pay attention to thermal management: the buck converters and LDO can dissipate significant power at high input voltages and load currents. Ensure adequate copper pour and thermal vias to keep junction temperatures within limits. Also, properly configure the I2C address and default settings for your specific application variant.
ドロップイン代替品: TPS65036x-Q1 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TPS65036x-Q1 （同一形状・フットプリント）.
クイック比較ツール — 並列比較する代替部品を選択:
TPS650362-Q1
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →TPS650360-Q1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TPS65036200RAYRQ1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TPS65036501RAYRQ1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TPS65036000RAYRQ1
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TPS650365-Q1
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TPS65036x-Q1 最大定格＆電気的特性
| Product Type | Automotive Power Management IC (PMIC) |
| トポロジー | 3 Step-Down Converters + 1 LDO |
| BUCK1 Input Voltage | Up to 35 V |
| LDO Input Voltage | 3 V to 5.5 V |
| LDO Output Current | 300 mA |
| パッケージ | 24-pin VQFN (3.5mm × 3.5mm) |
| 動作温度 | Up to +125°C (AEC-Q100 Grade 1) |
| AEC-Q100 | Qualified |
| Control Interface | I2C and pin control |
| Operating Modes | Forced Fixed-Frequency PWM / AutoPFM |
| Spread Spectrum Modulation | Optional (EMI reduction) |
| Number of Buck Converters | 3 |
| Number of LDOs | 1 |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| Automotive Grade | Yes (AEC-Q100) |
TPS65036x-Q1 24-pin vqfn (3.5mm × 3.5mm) ピン配置ガイド
TPS65036x-Q1 (24-pin vqfn (3.5mm × 3.5mm) パッケージ) のピン配置。 このパワーデバイスは、ゲート、ドレイン、ソース端子を備えています。非極性パッケージの場合、正確なピン1の向きとフットプリントの詳細については、メーカーのデータシートを参照してください。主な用途には、電源設計、モータ駆動、負荷スイッチングがあります。
詳細なピン配置データはありません: TPS65036x-Q1.
詳細は データシート をご参照ください。
主な用途
TPS65036x-Q1 の用途: 6 件s: Automotive Camera Module Power Supply, Automotive Radar Module Power Supply, MCU Power Supply in ADAS Systems, Infotainment System Power, Sensor Fusion Power Management, Automotive Gateway Power.
Automotive Camera Module Power Supply
The TPS65036x-Q1 provides the multiple supply rails required by automotive camera modules, including the 1.8V, 2.8V, and 3.3V rails for image sensors and processors. Its BUCK1 accepts input voltages up to 35V, enabling direct connection to automotive battery systems. The LDO supplies up to 300mA for analog circuits, and the I2C interface allows dynamic voltage scaling for low-power modes. The compact 3.5x3.5mm VQFN package fits the tight space constraints of camera modules, while AEC-Q100 qualification ensures reliability at +125°C under harsh automotive conditions.
おすすめ
Automotive Radar Module Power Supply
For radar modules, the TPS65036x-Q1 integrates three buck converters and an LDO to power radar processing chips, PLLs, and RF front-ends. The wide 35V input range accommodates 12V/24V vehicle supplies. Forced PWM mode ensures low EMI, important for radar performance, while optional spread-spectrum modulation further reduces interference. The LDO's 300mA capability handles sensitive analog circuits, and the pin-controlled low-power mode enables duty-cycled operation. AEC-Q100 qualification and +125°C operation make it suitable for exterior radar sensors exposed to extreme temperatures.
おすすめ
MCU Power Supply in ADAS Systems
The TPS65036x-Q1 powers automotive microcontrollers in ADAS domains, providing sequenced rails for core, I/O, and peripherals. The three buck converters offer high efficiency across load ranges, with AutoPFM for light-load efficiency. The LDO handles analog references and low-current loads. Programmable I2C allows fixed-frequency operation to avoid interference with sensitive MCU clocks. With input up to 35V, the device can derive power directly from the car battery, reducing the need for a pre-regulator. The 24-pin package and integrated sequencing minimize external components, simplifying board design.
おすすめ
Infotainment System Power
In infotainment systems, TPS65036x-Q1 provides multiple regulated rails for display controllers, audio CODECs, and connectivity ICs. The device's three buck converters and LDO supply 5V, 3.3V, 1.8V, and 1.2V rails with high efficiency. Forced PWM mode reduces audio interference, while spread-spectrum modulation helps meet automotive EMI standards. The I2C interface allows the system to adjust output voltages for different power states, supporting always-on and sleep modes. AEC-Q100 qualification ensures reliability over the vehicle's lifetime. The compact package fits in the space behind the dashboard.
おすすめ
Sensor Fusion Power Management
Sensor fusion systems combine data from multiple sensors, requiring several power rails with low noise and high stability. The TPS65036x-Q1's integrated LDO provides a low-noise 3.3V rail for analog sensors, while the buck converters supply digital processing ICs. The device's BUCK1 handles wide input voltages from the vehicle battery, and the AutoPFM mode ensures high efficiency at low sensor data rates. The I2C interface enables dynamic voltage scaling, and the +125°C rating supports under-hood sensor modules. The VQFN-24 package allows integration into small sensor fusion PCBs.
おすすめ
Automotive Gateway Power
The automotive gateway connects multiple ECUs, requiring a robust power supply with multiple outputs. The TPS65036x-Q1 provides three step-down converters and an LDO, generating the rails needed for gateways' processors, Ethernet PHYs, and CAN transceivers. The wide input range (up to 35V) protects against load dumps in automotive environments. Optional spread-spectrum modulation reduces EMI on communication lines. The device supports forced fixed-frequency PWM to keep switching noise away from sensitive transceivers. AEC-Q100 qualification and 24-pin VQFN package simplify automotive gateway board design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TPS65036x-Q1 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TPS650362-Q1 | TPS650360-Q1 | TPS65036200RAYRQ1 |
|---|---|---|---|---|
| Package | VQFN-24 (3.5x3.5mm) | VQFN-24 (3.5x3.5mm) | VQFN-24 (3.5x3.5mm) | VQFN-24 (3.5x3.5mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| BUCK1 Input Voltage | Up to 35V | Up to 35V | Up to 35V | Up to 35V |
| LDO Output Current | 300mA | 300mA | 300mA | 300mA |
| Number of Buck Converters | 3 | 3 | 3 | 3 |
| Operating Temperature | Up to +125°C | Up to +125°C | Up to +125°C | Up to +125°C |
| AEC-Q100 | Qualified | Qualified | Qualified | Qualified |
| Control Interface | I2C and pin control | I2C and pin control | I2C and pin control | I2C and pin control |
主な差別化要因
- Wide input voltage (up to 35V) for BUCK1 （vs TPS6522x-Q1)
- Integrated I2C control with pin-compatible variants （vs TPS65386x-Q1)
- AEC-Q100 Grade 1 qualification （vs Generic PMICs)
設計ノート
At high input voltage (e.g., 24V) and heavy load, the power dissipation in the buck converters can be significant. Ensure adequate thermal vias and copper pours under the QFN package to maintain junction temperature below 125°C. Refer to the TI datasheet thermal resistance values for the VQFN-24 package.
Place input capacitors close to each buck converter's VIN pins to minimize high-frequency switching noise. Use a 10uF ceramic capacitor for BUCK1 and 4.7uF for BUCK2/BUCK3. Ground the exposed thermal pad to the PCB ground plane with multiple vias.
Do not omit the sequencing between rails; follow the datasheet's recommended power-up ordering to prevent latch-up or misconfiguration. Also, ensure the I2C bus is properly pulled up and the address is set correctly for the selected variant.
コンプライアンス情報
RoHS compliant per JLCPCB listing. AEC-Q100 qualified per TI product page. REACH, halogen-free, and conflict minerals status not specified in provided data.
