TPSM5601R5 - 60V In, 1.5A Step-Down Power Module | TI
部品番号: TPSM5601R5 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.85 | $4.85 |
| 10 | $4.4 | $44.00 |
| 100 | $3.9 | $390.00 |
| 500 | $3.5 | $1,750.00 |
| 1,000 | $3.15 | $3,150.00 |
TPSM5601R5 概要
A power module is a complete DC-DC converter solution that integrates the controller, switching MOSFETs, inductor, and compensation network into a single surface-mount package. Within the power management hierarchy (power module -> step-down converter -> DC-DC converter -> power management IC), modules eliminate magnetics selection and loop compensation design, reducing time-to-market and layout risk compared to discrete converter solutions.
Key features include the wide 60-V input rating suited to 24-V and 48-V industrial rails with transient headroom, an output range of 1.0 V to 6 V set by a single external resistor divider, and as few as four external components for the complete solution. The Enhanced HotRod QFN construction places the die directly against the thermal pad, delivering low EMI, excellent thermal performance, and all pins accessible from the package perimeter for simple layout and inspection.
The internal compensation and integrated shielded inductor provide stable operation across the load range while reducing solution height and BOM count. The device operates from a -40C to +125C junction temperature range, supporting industrial and automotive-adjacent environments. The TPSM5601R5S variant adds spread-spectrum operation for lower EMI peaks, and the TPSM5601R5H variant extends output capability up to 16 V.
Typical applications include 24-V and 48-V industrial bus power supplies, factory automation and PLC I/O modules, test and measurement point-of-load rails, and distributed power systems that need a compact, regulated 1-V to 6-V rail from a wide input.
Design tip: because the inductor is integrated, thermal design centers on the PCB copper pour under the thermal pad - provide at least a 1-square-inch ground plane with thermal vias for reliable operation at full 1.5-A load at elevated ambient temperatures.
ドロップイン代替品: TPSM5601R5 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
TPSM5601R5S
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TPSM5601R5H
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TPSM5601R5H EXT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TPSM5601R5 最大定格＆電気的特性
| トポロジー | Step-down (Buck) DC/DC power module |
| 入力電圧範囲 | 4.2 V to 60 V |
| 出力電圧範囲 | 1 V to 6 V |
| Output Current | 1.5 A |
| スイッチング周波数 | 400 kHz (fixed) |
| パッケージ | 15-pin Enhanced HotRod QFN, 5 mm x 5.5 mm x 4 mm |
| 動作接合温度 | -40C to +125C |
| Integrated Inductor | Yes (shielded) |
| Integrated MOSFETs | Yes (power stage integrated) |
| External Component Count | As few as 4 external components |
| Output Regulation | Adjustable via external resistor divider |
| 実装タイプ | Surface Mount |
| EMI Performance | Low EMI (Enhanced HotRod QFN construction) |
| イネーブルピン | Yes (EN pin) |
| Packaging Option | Tape and Reel (TPSM5601R5RDAR) |
TPSM5601R5 ピン構成
| ピン 1 | VIN — Input supply voltage (4.2 V to 60 V) |
| ピン 2 | EN — Enable control input |
| ピン 3 | NC — No connect |
| ピン 4 | SW — Switch node (internal power stage) |
| ピン 5 | DNC — Do not connect |
| ピン 6 | NC — No connect |
| ピン 7 | VOUT — Regulated output voltage |
| ピン 8 | GND / Thermal Pad — Ground and exposed thermal pad |
主な用途
TPSM5601R5 の用途: 6 件s: 24-V and 48-V Industrial Bus Power Supplies, Factory Automation and PLC I/O Modules, Test and Measurement Point-of-Load Rails, Distributed Power Systems, Motor Drive and Motion Control Logic Supplies, Networking and Communications Infrastructure.
24-V and 48-V Industrial Bus Power Supplies
The TPSM5601R5's 4.2-V to 60-V input range directly accommodates 24-V and 48-V industrial distribution rails with transient headroom up to 60 V. Its 1-V to 6-V adjustable output at 1.5 A covers common logic and analog rails (3.3 V, 5 V) derived from the bus. Placed as the final regulation stage after bulk conversion, the integrated shielded inductor and internal compensation produce a compact, low-EMI solution requiring only about four external components, reducing BOM and layout risk in dense industrial control cabinets.
おすすめ
Factory Automation and PLC I/O Modules
PLC digital and analog I/O cards need a compact, reliable point-of-load from a 24-V backplane. The TPSM5601R5's -40C to +125C junction range and integrated magnetics withstand cabinet temperature swings without external inductor derating concerns. The 400-kHz fixed switching simplifies input filter design for EMI compliance, and the EN pin supports controlled power-up sequencing of card rails. All perimeter pins and a single thermal pad make automated optical inspection and rework straightforward in high-volume PLC manufacturing.
おすすめ
Test and Measurement Point-of-Load Rails
Instrumentation boards frequently combine a high-voltage input stage with sensitive analog loads. The TPSM5601R5 generates a clean 1-V to 6-V rail from a 60-V capable input, letting designers derive logic and analog supplies directly from wide-range auxiliary inputs. The Enhanced HotRod QFN's low EMI and integrated shielded inductor minimize switching artifacts coupling into measurement paths, and the adjustable output via one resistor divider speeds board bring-up and optioning across instrument product variants.
おすすめ
Distributed Power Systems
In distributed architectures, a 48-V intermediate bus feeds multiple point-of-load converters. The TPSM5601R5 provides local regulation at each load point, with its 60-V rating absorbing bus transients. Its small 5-mm x 5.5-mm footprint and integrated magnetics fit at the point of load without dedicated magnetics area, and the fixed 400-kHz frequency keeps ripple filter components predictable. The single-resistor output adjustment lets one PCB layout serve multiple rail voltages across a product family.
おすすめ
Motor Drive and Motion Control Logic Supplies
Motor drives combine high-voltage stages with 24-V or 48-V control buses from which logic supplies are derived. The TPSM5601R5 powers gate-driver bias and controller rails (3.3 V/5 V at 1.5 A) from the control bus while tolerating bus transients up to 60 V. Its integrated shielding limits switching noise that could couple into encoder and feedback circuits, and the -40C to +125C junction range suits drive enclosures with limited airflow near power stages.
おすすめ
Networking and Communications Infrastructure
Telecom and networking equipment use 48-V plant power, making the TPSM5601R5's 60-V input a natural fit for board-level point-of-load conversion. The compact module delivers 3.3-V or 5-V rails for control processors and transceivers at up to 1.5 A. The 400-kHz fixed switching and integrated inductor ease compliance with conducted EMI limits, and the EN pin enables orderly sequencing with upstream hot-swap controllers during card insertion in live backplanes.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TPSM5601R5 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TPSM5601R5S | TPSM5601R5H | TPSM5601R5H EXT |
|---|---|---|---|---|
| Package | 15-pin Enhanced HotRod QFN, 5 x 5.5 x 4 mm | Same 15-pin QFN | Same 15-pin QFN | Same 15-pin QFN |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Input Voltage Range | 4.2 V to 60 V | 4.2 V to 60 V | 4.2 V to 60 V | 4.2 V to 60 V |
| Output Voltage Range | 1 V to 6 V | 1 V to 6 V | 1 V to 16 V | 1 V to 16 V |
| Output Current | 1.5 A | 1.5 A | 1.5 A | 1.5 A |
| Switching Frequency | 400 kHz fixed | 400 kHz with spread spectrum | 400 kHz fixed | 400 kHz fixed |
| Minimum Junction Temperature | -40C | -40C | -40C | -55C |
| Spread Spectrum EMI Option | No | Yes | No (S variant available) | No |
主な差別化要因
- Integrated shielded inductor and compensation （vs TPS54360QDDARQ1 (discrete buck))
- Spread-spectrum EMI variant in identical footprint （vs TPSM5601R5S)
- Extended output and temperature variants （vs TPSM5601R5H / TPSM5601R5H EXT)
設計ノート
Because the shielded inductor is integrated, all heat dissipation is concentrated in the module package. TI recommends a minimum 1-square-inch copper pour on the ground layer connected to the exposed thermal pad through an array of thermal vias. Without adequate copper, full 1.5-A operation at 60-V input and high ambient temperatures may hit the +125C junction limit. Use the datasheet thermal derating curves for your exact VIN/VOUT operating point.
Place the input ceramic capacitor as close as possible to the VIN and GND pins to minimize high-frequency loop area. Keep the feedback resistor divider traces short and away from the SW node to avoid noise pickup on the output sense line. All functional pins are on the package perimeter, simplifying routing and inspection versus BGA-style modules.
The fixed 400-kHz switching frequency produces a predictable fundamental for input filter design. If conducted EMI limits are aggressive, choose the TPSM5601R5S variant, which operates identically but adds spread-spectrum modulation to reduce peak emissions. This can remove several dB of peak energy around 400 kHz without any PCB change since the footprint is identical.
コンプライアンス情報
Compliance details were not present in the provided verified data; consult the TI product page for RoHS/REACH status.
