XC7A100T-L2FTG256E - 28nm Artix-7 FPGA, 101440 Cells | Xilinx
部品番号: XC7A100T-L2FTG256E ✓ 生産中XC7A100T-L2FTG256E 概要
An FPGA is a reconfigurable digital integrated circuit whose interconnect and logic blocks can be programmed after manufacture. Within the semiconductor hierarchy, an FPGA is a programmable logic device, and the XC7A100T belongs to AMD Xilinx's Artix-7 product family. Artix-7 devices combine programmable logic, block RAM, DSP slices, dedicated I/O, and clock-management resources in a single package, replacing combinations of fixed-function logic and discrete components.
Key device attributes include 101,440 logic cells, 170 user I/O, a 256-FTBGA package, and 28 nm process technology. The -2 portion of the part number denotes the L2 speed grade, which provides a lower-performance operating point than -3 devices while remaining faster than -1 parts. The E suffix denotes the extended-temperature product option. These distinctions are important because FPGA timing closure, power consumption, and system qualification depend on both the selected speed grade and temperature grade.
The Artix-7 architecture supports parallel processing, high-speed serial interfaces, programmable logic, DSP operations, and flexible I/O assignment. Designers use Vivado Design Suite to configure the device, constrain the design, synthesize RTL, place and route the implementation, and generate the programming bitstream. Migration within the XC7A100T family generally requires device and pin planning, I/O-standard review, constraint verification, and timing revalidation rather than a change to the board-level architecture.
Typical uses include industrial automation, camera and image-processing pipelines, network interface equipment, test-and-measurement systems, embedded storage controllers, and multi-channel signal acquisition. In these systems, the 101,440-cell fabric can consolidate parallel pipelines that would otherwise require several programmable logic devices, while dedicated DSP and memory resources reduce external component count.
For PCB implementation, follow the AMD package pinout files and UG475 device guidance when assigning balls, power planes, decoupling, and high-speed I/O. Verify voltage, current, speed-grade, and temperature requirements against the exact ordering code before releasing a production BOM. Reusing an XC7A100T design on another density or package generally requires a new implementation and board-level review.
ドロップイン代替品: XC7A100T-L2FTG256E — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC7A100T-L2FTG256E (同一形状・フットプリント) — 相違点: Package, Temperature Grade, Logic Cells, Speed Grade, Mounting Type.
XC7A100T-2FTG256I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A100T-2FTG256C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A100T-3FTG256E
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A100T-1FTG256C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A100T-1FTG256I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A100T-L2FTG256E 最大定格&電気的特性
| Product Type | Artix-7 FPGA |
| Logic Cells | 101,440 cells |
| User I/O | 170 I/O |
| パッケージ | 256-FTBGA |
| Package Pin Count | 256 balls |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Speed Grade | L2 / -2 |
| Temperature Grade | Extended (E) |
| Programmability | SRAM-programmable FPGA |
| Product Status | Active |
| Packaging Format | Tray |
| Device Family | Artix-7 |
| Architecture | 28 nm Artix-7 FPGA |
XC7A100T-L2FTG256E 256 balls ピン配置ガイド
XC7A100T-L2FTG256E (256 balls パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7A100T-L2FTG256E.
詳細は データシート をご参照ください。
主な用途
XC7A100T-L2FTG256E の用途: 6 件s: Industrial Automation and Control, Camera and Image Processing, Communications and Network Interfaces, Test and Measurement Instrumentation, Embedded Storage and Data Acquisition, Aerospace and Defense Test Equipment.
Industrial Automation and Control
The XC7A100T-L2FTG256E suits industrial controllers that combine sequential control, parallel data acquisition, and communication interfaces in one programmable device. Its 101,440 logic cells can host multiple control loops and protocol engines, while 170 I/O provide connections for sensors, actuators, encoders, and digital buses. The -2 grade provides a practical balance between logic performance and power, and the E ordering designation supports extended-temperature deployment planning. Engineers should use the FTG256 package files to assign dedicated configuration, clock, and I/O balls correctly.
おすすめ
Camera and Image Processing
The XC7A100T-L2FTG256E can implement parallel pixel pipelines, exposure control, color conversion, and interface bridging in industrial imaging equipment. A fabric of 101,440 cells provides enough parallel capacity to divide processing across multiple clock domains instead of relying on sequential software execution. The 170 available I/O support camera sensors, memory interfaces, and external data-capture hardware. Timing-critical paths must close against the -2 speed grade, and any high-speed interface should use the package-specific I/O rules and board-level impedance controls from AMD guidance.
おすすめ
Communications and Network Interfaces
The XC7A100T-L2FTG256E is appropriate for packet-processing, bridging, and protocol-conversion equipment where deterministic parallel logic provides an advantage over a microcontroller. The 101,440-cell fabric can support multiple queueing engines, CRC functions, header parsing, and test logic concurrently. Its 170 I/O allow direct connections to transceivers, memories, and network processors. Designers should assign pins using the Artix-7 FTG256 package data and validate every external interface against the selected -2 timing grade and the extended-temperature requirements of the installation.
おすすめ
Test and Measurement Instrumentation
The XC7A100T-L2FTG256E can consolidate timing generators, pattern engines, capture logic, and interface control inside a laboratory instrument. Its 101,440 logic cells allow substantial test-vector parallelism, while 170 I/O support probes, trigger logic, front-end converters, and synchronization channels. Using the L2 grade requires worst-case timing analysis across the instrument's specified temperature range. Clocking, JTAG access, configuration, and dedicated user balls must be separated carefully in the PCB plan using the exact FTG256 assignment file.
おすすめ
Embedded Storage and Data Acquisition
The XC7A100T-L2FTG256E is useful in embedded storage controllers and multi-channel acquisition systems where parallel pipelines must process data at sustained rates. The 101,440-cell fabric can implement multiple read, write, check, and format engines, while 170 I/O connect external memory and converters. Compared with a sequential processor, the FPGA architecture provides deterministic latency and flexible datapath organization. Exact block RAM, DSP, and I/O-standard counts should be checked against the device data sheet before architecture selection.
おすすめ
Aerospace and Defense Test Equipment
The XC7A100T-L2FTG256E can support ground-based test systems, telemetry processors, and programmable signal-conditioning platforms that benefit from reconfigurable parallel logic. Its 101,440 logic cells allow multiple acquisition channels and analysis stages to operate concurrently, while the E extended-temperature designation supports deployment planning across a wider environmental range. Qualification requirements still depend on the exact program, screening level, and device documentation. Pin assignment, clock architecture, and power planning should follow the package files and AMD's Artix-7 implementation guidance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7A100T-L2FTG256E — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7A100T-2FTG256I | XC7A100T-2FTG256C | XC7A100T-3FTG256E | XC7A100T-1FTG256C | XC7A100T-1FTG256I |
|---|---|---|---|---|---|---|
| Package | 256-FTBGA | 256-FTBGA - same | 256-FTBGA - same | 256-FTBGA - same | 256-LBGA - same FTG256 footprint | 256-LBGA - same FTG256 footprint |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Device Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 101,440 | 101,440 | 101,440 | 101,440 | 101,440 | 101,440 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | L2 / -2 | -2 - same | -2 - same | -3 - one grade faster | -1 - one grade slower | -1 - one grade slower |
| Temperature Designation | E - extended | I - industrial | C - commercial | E - extended | C - commercial | I - industrial |
主な差別化要因
- Balanced L2 performance grade for cost-sensitive designs (vs XC7A100T-3FTG256E)
- Extended-temperature ordering option (vs XC7A100T-2FTG256C)
- Industrial temperature alternative with identical speed grade and footprint (vs XC7A100T-2FTG256I)
設計ノート
Implement the XC7A100T-L2FTG256E power tree from the device-specific power-decoupling guidance, including separate treatment for core, I/O, and auxiliary supplies. Place the required bulk and high-frequency decoupling capacitors at the associated package balls, and keep high-current return paths away from sensitive configuration and clock routing. Because this is a 1 V-core 28 nm FPGA, rail sequencing, supply-noise control, and worst-case current estimation are central to reliable implementation.
Use the AMD XC7A100T FTG256 package pinout files rather than a generic 256-ball symbol when assigning PCB tracks. Verify configuration pins, clock-capable pins, voltage reference balls, dedicated user balls, and no-connect positions against the exact device. High-speed I/O should follow the recommended impedance and return-path structure, while power-distribution vias should be distributed around the BGA perimeter and tied to the appropriate planes.
Estimated: heat generation depends on utilization, clock rate, I/O activity, and the -2 speed-grade operating point, so use the AMD power estimator with the actual design rather than a single nominal dissipation figure. Compare estimated junction temperature with the selected E-grade temperature limit and the PCB's thermal resistance. Spread the FPGA's high-current connections across multiple power vias, provide uninterrupted plane areas beneath the device, and avoid blocking airflow with tall components or enclosure walls.
A package-compatible replacement does not remove the need for design validation. Change the target device in Vivado, confirm that the selected speed grade closes worst-case timing, and review every I/O standard and pin constraint. Also recheck power, thermal conditions, configuration behavior, and any special-use pins. For XC7A100T density changes, board compatibility must be established separately because logic resources and package availability can differ even when a common board family is used.
コンプライアンス情報
The E suffix identifies an extended-temperature product option; it is not an automotive qualification designation. Specific environmental and material-compliance declarations require confirmation against the manufacturer documentation for the exact ordering code.