Xilinx

XC7A100T-L2FTG256E - 28nm Artix-7 FPGA, 101440 Cells | Xilinx

부품 번호: XC7A100T-L2FTG256E ✓ 활성
1 V Vdss 256-FTBGA Package L2 / -2 Speed
MOQ: 1 |

XC7A100T-L2FTG256E 개요

The Xilinx XC7A100T-L2FTG256E is an Artix-7 field-programmable gate array built on 28 nm technology, with 101,440 logic cells, 170 I/O, and a 256-ball FT BGA package. The L2 speed grade targets a balance between performance and power, while the E suffix identifies the extended-temperature configuration. Operating from a 1 V core supply, the device is suited to compact industrial, communications, instrumentation, and embedded-control systems requiring programmable logic and substantial parallel processing capacity.

An FPGA is a reconfigurable digital integrated circuit whose interconnect and logic blocks can be programmed after manufacture. Within the semiconductor hierarchy, an FPGA is a programmable logic device, and the XC7A100T belongs to AMD Xilinx's Artix-7 product family. Artix-7 devices combine programmable logic, block RAM, DSP slices, dedicated I/O, and clock-management resources in a single package, replacing combinations of fixed-function logic and discrete components.

Key device attributes include 101,440 logic cells, 170 user I/O, a 256-FTBGA package, and 28 nm process technology. The -2 portion of the part number denotes the L2 speed grade, which provides a lower-performance operating point than -3 devices while remaining faster than -1 parts. The E suffix denotes the extended-temperature product option. These distinctions are important because FPGA timing closure, power consumption, and system qualification depend on both the selected speed grade and temperature grade.

The Artix-7 architecture supports parallel processing, high-speed serial interfaces, programmable logic, DSP operations, and flexible I/O assignment. Designers use Vivado Design Suite to configure the device, constrain the design, synthesize RTL, place and route the implementation, and generate the programming bitstream. Migration within the XC7A100T family generally requires device and pin planning, I/O-standard review, constraint verification, and timing revalidation rather than a change to the board-level architecture.

Typical uses include industrial automation, camera and image-processing pipelines, network interface equipment, test-and-measurement systems, embedded storage controllers, and multi-channel signal acquisition. In these systems, the 101,440-cell fabric can consolidate parallel pipelines that would otherwise require several programmable logic devices, while dedicated DSP and memory resources reduce external component count.

For PCB implementation, follow the AMD package pinout files and UG475 device guidance when assigning balls, power planes, decoupling, and high-speed I/O. Verify voltage, current, speed-grade, and temperature requirements against the exact ordering code before releasing a production BOM. Reusing an XC7A100T design on another density or package generally requires a new implementation and board-level review.

드롭인 대체품: XC7A100T-L2FTG256E — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC7A100T-L2FTG256E (동일 폼 팩터 및 풋프린트) — 차이점: Package, Temperature Grade, Logic Cells, Speed Grade, Mounting Type.

AMD
Package: 256-ball FTBGA (FTG256)
Temperature Grade: Commercial (C): 0 C to +85 C
Logic Cells: 101,440
비교 대상: XC7A100T-L2FTG256E →
AMD
Package: 256-ball FT BGA
Temperature Grade: Industrial
Speed Grade: -1
비교 대상: XC7A100T-L2FTG256E →
AMD
Package: 256-pin FTG256 package
Temperature Grade: Commercial, 0°C to +85°C
Logic Cells: 101,440 logic cells
비교 대상: XC7A100T-L2FTG256E →
AMD
Package: FTBGA-256
Temperature Grade: Industrial, -40°C to +100°C
Speed Grade: -2
비교 대상: XC7A100T-L2FTG256E →
AMD
Package: 256-ball TFBGA (FTG256)
Temperature Grade: Extended commercial (E)
Mounting Type: Surface mount
비교 대상: XC7A100T-L2FTG256E →

XC7A100T-2FTG256I

✅ 드롭인
AMD
📦 256-FTBGA
Artix-7 field-programmable gate array (FPGA) · 101,440 cells · 170 pins · 628 slices · 4,976,640 bits · 28 nm · FTBGA-256 · -2

가격 문의

데이터시트 보기 →

XC7A100T-2FTG256C

✅ 드롭인
AMD
📦 256-FTBGA
Artix-7 Field-Programmable Gate Array (FPGA) · 101,440 logic cells · 170 I/O · 240 DSP48E1 slices · 256-pin FTG256 package · FTBGA-256 / 256-LBGA · 17 mm x 17 mm · 28 nm

가격 문의

데이터시트 보기 →

XC7A100T-3FTG256E

✅ 드롭인
AMD
📦 256-FTBGA
Artix-7 Field Programmable Gate Array (FPGA) · 101,440 cells · 170 I/Os · 28 nm · -3 · 256-ball TFBGA (FTG256) · LBGA · Surface mount

가격 문의

데이터시트 보기 →

XC7A100T-1FTG256C

✅ 드롭인
AMD
📦 256-FTBGA
Artix-7 · 101,440 · 4,976,640 · 4,860 · 240 · -1 · Commercial (C): 0 C to +85 C · 256-ball FTBGA (FTG256)

가격 문의

데이터시트 보기 →

XC7A100T-1FTG256I

✅ 드롭인
AMD
📦 256-FTBGA
Artix-7 · 101,440 cells · 240 slices · 4,860 Kb · 8 GTP transceivers · 170 I/O · 28 nm · 1 V

가격 문의

데이터시트 보기 →

XC7A100T-L2FTG256E 최대 정격 & 전기적 특성

Product Type Artix-7 FPGA
Logic Cells 101,440 cells
User I/O 170 I/O
패키지 256-FTBGA
Package Pin Count 256 balls
Process Technology 28 nm
Core Supply Voltage 1 V
Speed Grade L2 / -2
Temperature Grade Extended (E)
Programmability SRAM-programmable FPGA
Product Status Active
Packaging Format Tray
Device Family Artix-7
Architecture 28 nm Artix-7 FPGA

XC7A100T-L2FTG256E 256 balls 핀 구성 가이드

XC7A100T-L2FTG256E(256 balls 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC7A100T-L2FTG256E의 256 balls 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC7A100T-L2FTG256E.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC7A100T-L2FTG256E 적합 용도: 6 애플리케이션s: Industrial Automation and Control, Camera and Image Processing, Communications and Network Interfaces, Test and Measurement Instrumentation, Embedded Storage and Data Acquisition, Aerospace and Defense Test Equipment.

🏭

Industrial Automation and Control

The XC7A100T-L2FTG256E suits industrial controllers that combine sequential control, parallel data acquisition, and communication interfaces in one programmable device. Its 101,440 logic cells can host multiple control loops and protocol engines, while 170 I/O provide connections for sensors, actuators, encoders, and digital buses. The -2 grade provides a practical balance between logic performance and power, and the E ordering designation supports extended-temperature deployment planning. Engineers should use the FTG256 package files to assign dedicated configuration, clock, and I/O balls correctly.

📷

Camera and Image Processing

The XC7A100T-L2FTG256E can implement parallel pixel pipelines, exposure control, color conversion, and interface bridging in industrial imaging equipment. A fabric of 101,440 cells provides enough parallel capacity to divide processing across multiple clock domains instead of relying on sequential software execution. The 170 available I/O support camera sensors, memory interfaces, and external data-capture hardware. Timing-critical paths must close against the -2 speed grade, and any high-speed interface should use the package-specific I/O rules and board-level impedance controls from AMD guidance.

🌐

Communications and Network Interfaces

The XC7A100T-L2FTG256E is appropriate for packet-processing, bridging, and protocol-conversion equipment where deterministic parallel logic provides an advantage over a microcontroller. The 101,440-cell fabric can support multiple queueing engines, CRC functions, header parsing, and test logic concurrently. Its 170 I/O allow direct connections to transceivers, memories, and network processors. Designers should assign pins using the Artix-7 FTG256 package data and validate every external interface against the selected -2 timing grade and the extended-temperature requirements of the installation.

🔧

Test and Measurement Instrumentation

The XC7A100T-L2FTG256E can consolidate timing generators, pattern engines, capture logic, and interface control inside a laboratory instrument. Its 101,440 logic cells allow substantial test-vector parallelism, while 170 I/O support probes, trigger logic, front-end converters, and synchronization channels. Using the L2 grade requires worst-case timing analysis across the instrument's specified temperature range. Clocking, JTAG access, configuration, and dedicated user balls must be separated carefully in the PCB plan using the exact FTG256 assignment file.

💾

Embedded Storage and Data Acquisition

The XC7A100T-L2FTG256E is useful in embedded storage controllers and multi-channel acquisition systems where parallel pipelines must process data at sustained rates. The 101,440-cell fabric can implement multiple read, write, check, and format engines, while 170 I/O connect external memory and converters. Compared with a sequential processor, the FPGA architecture provides deterministic latency and flexible datapath organization. Exact block RAM, DSP, and I/O-standard counts should be checked against the device data sheet before architecture selection.

✈️

Aerospace and Defense Test Equipment

The XC7A100T-L2FTG256E can support ground-based test systems, telemetry processors, and programmable signal-conditioning platforms that benefit from reconfigurable parallel logic. Its 101,440 logic cells allow multiple acquisition channels and analysis stages to operate concurrently, while the E extended-temperature designation supports deployment planning across a wider environmental range. Qualification requirements still depend on the exact program, screening level, and device documentation. Pin assignment, clock architecture, and power planning should follow the package files and AMD's Artix-7 implementation guidance.

What are the key specifications of XC7A100T-L2FTG256E that engineers should know?
The XC7A100T-L2FTG256E is a 28 nm Artix-7 FPGA with 101,440 logic cells, 170 user I/O, a 1 V core supply, and a 256-FTBGA package. According to the AMD Artix-7 XC7A100T data sheet, the -2 ordering code identifies the L2 speed grade, while the E suffix identifies the extended-temperature configuration. These figures make the device appropriate for industrial and communications designs requiring moderate-to-high parallel logic density without moving to a larger FPGA family.
Where can I download the XC7A100T-L2FTG256E datasheet PDF?
The XC7A100T-L2FTG256E data sheet is available through the AMD and Xilinx documentation channels, with a consolidated download page listed on Octopart. The core Artix-7 XC7A100T document covers DC and AC switching characteristics, while the package pinout files on AMD's developer site provide the ball assignments. Use the exact XC7A100T device data together with the FTG256 package files, because device resources and package pins are separate topics.
What does the L2 speed grade mean for XC7A100T-L2FTG256E?
The L2 designation identifies the -2 Artix-7 speed grade, which places the device between the -1 and -3 grades in the XC7A100T ordering range. According to AMD's Artix-7 device documentation, speed grades affect achievable timing performance and therefore usable clock and I/O performance. A design must close timing against the selected -2 grade rather than assuming the limits of a -3 device.
Is the XC7A100T-L2FTG256E still active?
The XC7A100T-L2FTG256E is listed as an active, in-production Artix-7 FPGA. The manufacturer describes the Artix-7 family as a current low-power, low-cost portfolio optimized for performance per watt and transceiver line rates. For new production releases, confirm ordering-code availability and lifecycle status with AMD or through the Request a Quote form on this page.
What can replace XC7A100T-L2FTG256E as a drop-in part?
The closest drop-in choices are XC7A100T speed- and temperature-grade variants in the same FTG256 package, including XC7A100T-2FTG256I and XC7A100T-2FTG256C. A same-package variant can preserve the PCB footprint, but designers must still review temperature qualification, timing closure, and I/O constraints. The -1 and -3 variants retain the package while changing the performance grade, so each requires design validation rather than an unconditional substitution.
What is the best AMD Xilinx equivalent for XC7A100T-L2FTG256E?
The best same-family equivalent is XC7A100T-2FTG256I because it preserves the XC7A100T device density, -2 speed grade, and FTG256 footprint while targeting the industrial temperature option. AMD's Artix-7 family naming distinguishes speed, temperature, and package suffixes. Verify the required temperature rating and confirm timing, power, and supply constraints before treating the I-grade device as a production substitute.
Is XC7A100T-L2FTG256E suitable for industrial automation systems?
Yes, the XC7A100T-L2FTG256E fits industrial automation systems that need deterministic parallel processing, programmable control logic, and multiple external interfaces. Its 101,440 logic cells allow multiple acquisition, filtering, and control pipelines to be consolidated, while 170 I/O provide substantial board-level connectivity. The extended-temperature E designation is relevant to industrial qualification, although the exact operating limits must be checked against the AMD data sheet.
What is the difference between XC7A100T-L2FTG256E and XC7A100T-2FTG256I?
Both devices use the XC7A100T Artix-7 implementation, the -2 speed grade, and the 256-FTBGA footprint. Their primary ordering distinction is the temperature designation: E identifies the extended-temperature option, while I identifies the industrial option. For a board already built around FTG256, the footprint remains compatible, but temperature limits, system qualification, and lifecycle requirements should determine which ordering code is acceptable.
When should I choose XC7A100T-L2FTG256E instead of a -1 or -3 Artix-7 device?
Choose the L2 grade when the design requires more timing headroom than a -1 device but does not justify the operating point of a -3 device. The -3 grade is preferable for maximum performance margin, while the -1 grade may reduce cost when the design closes comfortably at the slower grade. This selection must be made against worst-case timing, power, temperature, and availability constraints rather than nominal device marketing labels.
Where can I find the XC7A100T-L2FTG256E pinout and package files?
AMD publishes Artix-7 package device pinout files in TXT and CSV formats, and the package assignments are interpreted with UG475 guidance. Use the XC7A100T FTG256-specific file rather than a generic 256-ball assignment because neighboring devices in the same family may assign different balls to configuration, power, and I/O functions. The pinout file also identifies special-use and no-connect balls that must be handled during PCB layout.
How do I choose between XC7A100T-2FTG256C and XC7A100T-L2FTG256E?
XC7A100T-2FTG256C is the commercial-temperature member of the -2 speed grade, while XC7A100T-L2FTG256E carries the extended-temperature E designation. They share the XC7A100T density and FTG256 footprint, making them mechanically compatible. Selection should follow the required ambient range and qualification target: use the E-grade device when the commercial-temperature option does not cover the deployment environment.
Where can I buy XC7A100T-L2FTG256E online and check current stock?
Use the Request a Quote form on this page to request the current unit price, stock position, and lead time for XC7A100T-L2FTG256E. Quote-based confirmation is appropriate for a programmable FPGA because allocation and lead time can vary with configuration, volume, and market conditions. The order code XC7A100T-L2FTG256E should be stated in full on the request to avoid ambiguity with other XC7A100T speed grades.
What is the lead time for XC7A100T-L2FTG256E?
The current lead time for XC7A100T-L2FTG256E should be confirmed through the Request a Quote form on this page. Lead time can vary with order volume, purchasing schedule, and inventory position, so a fixed duration should not be assumed for a programmable FPGA order. Include the target quantity, delivery location, and required programming or traceability requirements with the request.
How much does XC7A100T-L2FTG256E cost?
Request the current XC7A100T-L2FTG256E price through the Request a Quote form on this page. The final price depends on volume, availability, and purchasing terms, and FPGA pricing can vary materially across a long product life. A quantity-based quote provides a current commercial figure for the exact -2 speed grade, extended-temperature suffix, and 256-FTBGA package.
Can an XC7A100T-3FTG256E replace XC7A100T-L2FTG256E without changing the PCB?
An XC7A100T-3FTG256E uses the same XC7A100T density and FTG256 footprint as the XC7A100T-L2FTG256E, so the physical pad pattern can remain unchanged. The -3 part provides a higher performance grade than the -2 target, which may affect timing margins and power behavior. Confirm power budgets, thermal conditions, configuration compatibility, and timing closure in Vivado before adopting it.

엔지니어링 참조 데이터: XC7A100T-L2FTG256E — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose XC7A100T-L2FTG256E when the design needs the XC7A100T's 101,440 logic cells and 170 I/O, operates from a 1 V core supply, and targets an extended-temperature deployment with a moderate L2 timing requirement. Select XC7A100T-2FTG256I when industrial-grade ordering is required at the same -2 performance level. Select XC7A100T-2FTG256C when commercial-temperature limits are acceptable. Choose XC7A100T-3FTG256E when additional timing margin justifies the higher performance grade, and use -1 variants only when the design closes timing on the slower grade. In every case, confirm the exact FTG256 ball assignments, worst-case timing, power budget, thermal margin, and configuration requirements in Vivado before releasing the design.

대체품과의 비교

파라미터 이 제품 XC7A100T-2FTG256I XC7A100T-2FTG256C XC7A100T-3FTG256E XC7A100T-1FTG256C XC7A100T-1FTG256I
Package 256-FTBGA 256-FTBGA - same 256-FTBGA - same 256-FTBGA - same 256-LBGA - same FTG256 footprint 256-LBGA - same FTG256 footprint
Brand Xilinx Xilinx Xilinx Xilinx Xilinx Xilinx
Device Family Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
Logic Cells 101,440 101,440 101,440 101,440 101,440 101,440
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Speed Grade L2 / -2 -2 - same -2 - same -3 - one grade faster -1 - one grade slower -1 - one grade slower
Temperature Designation E - extended I - industrial C - commercial E - extended C - commercial I - industrial

주요 차별점

  • Balanced L2 performance grade for cost-sensitive designs (vs XC7A100T-3FTG256E)
  • Extended-temperature ordering option (vs XC7A100T-2FTG256C)
  • Industrial temperature alternative with identical speed grade and footprint (vs XC7A100T-2FTG256I)

설계 노트

Implement the XC7A100T-L2FTG256E power tree from the device-specific power-decoupling guidance, including separate treatment for core, I/O, and auxiliary supplies. Place the required bulk and high-frequency decoupling capacitors at the associated package balls, and keep high-current return paths away from sensitive configuration and clock routing. Because this is a 1 V-core 28 nm FPGA, rail sequencing, supply-noise control, and worst-case current estimation are central to reliable implementation.

Use the AMD XC7A100T FTG256 package pinout files rather than a generic 256-ball symbol when assigning PCB tracks. Verify configuration pins, clock-capable pins, voltage reference balls, dedicated user balls, and no-connect positions against the exact device. High-speed I/O should follow the recommended impedance and return-path structure, while power-distribution vias should be distributed around the BGA perimeter and tied to the appropriate planes.

Estimated: heat generation depends on utilization, clock rate, I/O activity, and the -2 speed-grade operating point, so use the AMD power estimator with the actual design rather than a single nominal dissipation figure. Compare estimated junction temperature with the selected E-grade temperature limit and the PCB's thermal resistance. Spread the FPGA's high-current connections across multiple power vias, provide uninterrupted plane areas beneath the device, and avoid blocking airflow with tall components or enclosure walls.

A package-compatible replacement does not remove the need for design validation. Change the target device in Vivado, confirm that the selected speed grade closes worst-case timing, and review every I/O standard and pin constraint. Also recheck power, thermal conditions, configuration behavior, and any special-use pins. For XC7A100T density changes, board compatibility must be established separately because logic resources and package availability can differ even when a common board family is used.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The E suffix identifies an extended-temperature product option; it is not an automotive qualification designation. Specific environmental and material-compliance declarations require confirmation against the manufacturer documentation for the exact ordering code.

데이터 검증일: 2026-11-18 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

xc7a100t datasheet xc7a100t fpga xc7a100t 2fgg484i xc7a100t 1csg324c xc7a100t 2csg324i xc7a100t 1fgg484i xc7a100t fgg484 xc7a100t 2fgg484c xc7a100t 1csg324i xc7a100t 2fgg676i XC7A100T-L2FTG256E datasheet PDF XC7A100T-L2FTG256E pinout XC7A100T-L2FTG256E equivalent XC7A100T-L2FTG256E replacement XC7A100T-L2FTG256E price

관련 부품 & 용어

Xilinx AMD XC7A100T-L2FTG256E XC7A100T-2FTG256I XC7A100T-2FTG256C XC7A100T-3FTG256E XC7A100T-1FTG256C XC7A100T-1FTG256I Artix-7 FPGA field-programmable gate array programmable logic device semiconductor 28 nm process technology L2 speed grade 101,440 logic cells 170 I/O 256-FTBGA BGA package family surface-mount package Vivado Design Suite bitstream FTBGA-256 industrial automation image processing
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기