XC7Z030-1FB484I - 667MHz Zynq SoC | AMD | Industrial FPGA
部品番号: XC7Z030-1FB484I ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0.01 | $0.01 |
| 10 | $0.01 | $0.10 |
| 100 | $0.01 | $1.00 |
| 500 | $0.01 | $5.00 |
| 1,000 | $0.01 | $10.00 |
XC7Z030-1FB484I 概要
A Zynq-7000 SoC FPGA integrates a programmable logic section with one or more ARM Cortex-A9 processors. The processor subsystem executes software, while the FPGA fabric implements parallel datapaths, custom interfaces, protocol engines, and control logic. This combination allows designers to place software-controlled functions and hardware-accelerated operations in one package instead of using a separate processor and FPGA.
The XC7Z030-1FB484I provides 125K logic cells and a 667 MHz processor frequency according to the verified distributor listing. The part is identified as a speed-grade-1, industrial-temperature device by the verified FPGA Market listing. Its 484-FCBGA package provides 484 terminals in a 23 x 23 mm surface-mount format. Exact pin names, electrical limits, I/O standards, memory configuration, and power requirements were not included in the supplied source data and must be confirmed in the manufacturer datasheet.
Typical designs use the programmable fabric for high-throughput parallel processing and the Cortex-A9 subsystem for operating-system support, networking, control loops, or application workloads. The integrated architecture can simplify a board-level partition when software and programmable logic must exchange data frequently. Engineers should still budget for external memory, clocking, power regulation, signal conditioning, and thermal management where the selected design requires them.
The most important layout consideration is package escape routing. A 484-ball BGA device requires a substrate or PCB with compatible ball geometry, via-in-pad or fanout strategy, controlled impedance, and an assembly process capable of handling the package pitch. Verify the exact pinout and I/O assignments against AMD package documentation before schematic capture or PCB release.
This page consolidates verified distributor and cross-reference results, separates confirmed specifications from missing parameters, and provides engineering guidance for evaluating this industrial Zynq SoC FPGA. It does not infer a drop-in replacement unless a manufacturer or distributor explicitly verifies the same package and pin compatibility.
ドロップイン代替品: XC7Z030-1FB484I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC7Z030-1FB484I （同一形状・フットプリント） — 相違点: Logic Cells, Package, Lifecycle Status, Speed Grade.
クイック比較ツール — 並列比較する代替部品を選択:
XC7Z030-1FBG484I
✅ ドロップイン✓ 在庫あり
$160 / 個
データシートを見る →XC7Z030-2FBG484I
✅ ドロップイン✓ 在庫あり
$58 / 個
データシートを見る →XC7Z30-FBG484
✅ ドロップイン📋 参考代替品（カタログ未掲載）
XC7Z030-1FB484I 最大定格＆電気的特性
| Product Type | Zynq-7000 Kintex-7 system-on-chip FPGA |
| Programmable Logic | FPGA |
| Logic Cells | 125K logic cells |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| Debug Support | CoreSight |
| パッケージ | 484-FCBGA (23 x 23 mm) |
| Package Pin Count | 484 balls |
| Speed Grade | 1 |
| Temperature Grade | Industrial |
| Device Architecture | Zynq-7000 SoC with Kintex-7 FPGA fabric |
| Surface Mount | Yes |
| Manufacturer | AMD / Xilinx |
| ライフサイクル状態 | Not stated in supplied verified data |
XC7Z030-1FB484I 484 balls ピン配置ガイド
XC7Z030-1FB484I (484 balls パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7Z030-1FB484I.
詳細は データシート をご参照ください。
主な用途
XC7Z030-1FB484I の用途: 6 件s: Industrial Automation Controller, Machine Vision Image Processing, Communications and Network Equipment, Data Acquisition and Signal Conditioning, Embedded Control and HMI Platform, Programmable Test and Measurement.
Industrial Automation Controller
The XC7Z030-1FB484I fits industrial automation when a controller must combine deterministic programmable logic with a higher-level processor. Its 125K logic cells can host parallel control, timing, or interface functions, while the dual ARM Cortex-A9 MPCore subsystem can execute communications, diagnostics, and supervisory software. The 667 MHz processor figure provides a useful platform reference, but actual control-loop performance depends on the design, memory system, interrupts, and FPGA timing closure. Use the verified AMD package files to confirm ball assignments and supply requirements before schematic capture.
おすすめ
Machine Vision Image Processing
For machine vision and image-processing systems, the XC7Z030-1FB484I can divide work between hardware pipelines and software. The FPGA fabric is suited to parallel pixel transport, fixed-function filtering, thresholding, and frame timing, while the Cortex-A9 processors can manage configuration, buffering policy, and higher-level decisions. The verified data confirms 125K logic cells and 667 MHz processor frequency, but it does not provide camera-interface, memory-bandwidth, or image-processing resource limits. Those requirements must be validated against the complete AMD device documentation and the selected external memory interface.
おすすめ
Communications and Network Equipment
XC7Z030-1FB484I is relevant to communication equipment where programmable logic must implement packet handling, data movement, or custom interfaces while the ARM subsystem supports control-plane software. The integrated SoC architecture can reduce inter-chip traffic for tightly coupled software and hardware functions. The verified listing confirms the Zynq-7000 Kintex-7 architecture and dual Cortex-A9 processors, but it does not confirm Ethernet, PCIe, transceiver, protocol, or security features. Engineers must check the exact device datasheet and board-level clocking before treating it as a networking solution.
おすすめ
Data Acquisition and Signal Conditioning
The XC7Z030-1FB484I can serve as the processing centerpiece of a data-acquisition system when acquisition timing, parallel data paths, and control logic must be coordinated. FPGA logic can implement counters, channel sequencing, filtering front ends, and data packing, while the processor subsystem handles configuration and data management. The verified sources confirm the 125K logic-cell and 667 MHz processor platform but do not specify ADC sample rates, memory interfaces, or I/O timing. Use companion converters only after verifying voltage, interface mode, clocking, and package-level routing requirements.
おすすめ
Embedded Control and HMI Platform
The XC7Z030-1FB484I supports embedded products that need both a software environment and programmable hardware. The ARM Cortex-A9 MPCore cores can host application logic, communications, and user-interface services, while FPGA fabric can accelerate peripheral control, timing, or custom display and motor-control functions. The verified data identifies an industrial device and a 484-FCBGA package, but does not confirm operating-system support, display interfaces, or safety functions. Product qualification should therefore include processor, memory, boot, security, and peripheral validation using AMD tools and documentation.
おすすめ
Programmable Test and Measurement
XC7Z030-1FB484I is a candidate for programmable test and measurement systems because it combines a processor subsystem with FPGA-based timing and signal-path logic. The FPGA fabric can implement deterministic stimulus generation, acquisition pipelines, or protocol engines, while the ARM cores manage sequencing, calibration, and data storage. The verified listing confirms 125K logic cells and 667 MHz processor frequency, while detailed clock, I/O, memory, and instrumentation features are not supplied. Confirm exact electrical limits and package pin assignments in the manufacturer documentation before selecting it for precision instrumentation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7Z030-1FB484I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7Z030-1FBG484I | XC7Z030-2FBG484I | XC7Z30-FBG484 |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD / Xilinx |
| Package | 484-FCBGA (23 x 23 mm) | 484-FCBGA (23 x 23 mm) | 484-FCBGA (23 x 23 mm) | 484-FCBGA |
| Programmable Logic | Zynq-7000 Kintex-7 FPGA fabric | Zynq-7000 Kintex-7 FPGA fabric | Zynq-7000 Kintex-7 FPGA fabric | Zynq-7000 package family |
| Pin Count | 484 balls | 484 balls | 484 balls | 484-FCBGA package family |
主な差別化要因
- Processor and programmable logic integration （vs XC7Z30-FBG484)
- Known speed-grade identity （vs XC7Z030-2FBG484I)
- Package format continuity （vs XC7Z030-1FBG484I)
設計ノート
Treat the 484-FCBGA as a fine-pitch BGA design constraint. Confirm ball assignments using the AMD Zynq-7000 package files, then plan fanout, layer transitions, via-in-pad or buried-via structures, solder mask, and assembly capability with the PCB fabricator. A same-package candidate is not a substitute for a verified ball map and footprint review.
Build the power tree from the exact device supply, I/O, and sequencing requirements in the manufacturer documentation. The supplied verified data does not provide voltage rails or current limits, so do not infer them from the 667 MHz processor figure. Validate startup, rail ordering, decoupling, voltage tolerances, and worst-case current before schematic release.
Separate high-speed or sensitive interfaces from noisy power and switching paths, and preserve the required return paths on the PCB. Because the supplied data does not identify specific transceiver or I/O capabilities, determine which pins are high-speed, differential, clock, or configuration-related from the exact package and device documentation before routing.
Do not substitute XC7Z030-2FBG484I solely because it uses the same listed package. Its verified processor frequency is 800 MHz rather than the target's 667 MHz, and speed-grade changes can affect timing, power, qualification, and system behavior. Similarly, do not treat XC7Z030-1FBG484I as drop-in without confirming ordering-code, package-ball, voltage, and lifecycle equivalence.
コンプライアンス情報
The supplied verified web results do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-mineral status. Industrial temperature classification is stated by the FPGA Market result, but that classification does not establish regulatory compliance.
