XC7Z030-1FB484I - 667MHz Zynq SoC | AMD | Industrial FPGA
料号： XC7Z030-1FB484I ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0.01 | $0.01 |
| 10 | $0.01 | $0.10 |
| 100 | $0.01 | $1.00 |
| 500 | $0.01 | $5.00 |
| 1,000 | $0.01 | $10.00 |
XC7Z030-1FB484I 概述
A Zynq-7000 SoC FPGA integrates a programmable logic section with one or more ARM Cortex-A9 processors. The processor subsystem executes software, while the FPGA fabric implements parallel datapaths, custom interfaces, protocol engines, and control logic. This combination allows designers to place software-controlled functions and hardware-accelerated operations in one package instead of using a separate processor and FPGA.
The XC7Z030-1FB484I provides 125K logic cells and a 667 MHz processor frequency according to the verified distributor listing. The part is identified as a speed-grade-1, industrial-temperature device by the verified FPGA Market listing. Its 484-FCBGA package provides 484 terminals in a 23 x 23 mm surface-mount format. Exact pin names, electrical limits, I/O standards, memory configuration, and power requirements were not included in the supplied source data and must be confirmed in the manufacturer datasheet.
Typical designs use the programmable fabric for high-throughput parallel processing and the Cortex-A9 subsystem for operating-system support, networking, control loops, or application workloads. The integrated architecture can simplify a board-level partition when software and programmable logic must exchange data frequently. Engineers should still budget for external memory, clocking, power regulation, signal conditioning, and thermal management where the selected design requires them.
The most important layout consideration is package escape routing. A 484-ball BGA device requires a substrate or PCB with compatible ball geometry, via-in-pad or fanout strategy, controlled impedance, and an assembly process capable of handling the package pitch. Verify the exact pinout and I/O assignments against AMD package documentation before schematic capture or PCB release.
This page consolidates verified distributor and cross-reference results, separates confirmed specifications from missing parameters, and provides engineering guidance for evaluating this industrial Zynq SoC FPGA. It does not infer a drop-in replacement unless a manufacturer or distributor explicitly verifies the same package and pin compatibility.
直接替换替代料： XC7Z030-1FB484I ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： XC7Z030-1FB484I （相同外形与封装尺寸） ——差异在于 Logic Cells, Package, Lifecycle Status, Speed Grade.
快速对比工具——选择替代料号进行并排对比：
XC7Z030-1FBG484I
✅ 直接替换✓ 有现货
$160 / 个
查看数据手册 →XC7Z030-2FBG484I
✅ 直接替换✓ 有现货
$58 / 个
查看数据手册 →XC7Z30-FBG484
✅ 直接替换📋 参考替代料（不在目录中）
XC7Z030-1FB484I 最大额定值与电气特性
| Product Type | Zynq-7000 Kintex-7 system-on-chip FPGA |
| Programmable Logic | FPGA |
| Logic Cells | 125K logic cells |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| Debug Support | CoreSight |
| 封装 | 484-FCBGA (23 x 23 mm) |
| Package Pin Count | 484 balls |
| Speed Grade | 1 |
| Temperature Grade | Industrial |
| Device Architecture | Zynq-7000 SoC with Kintex-7 FPGA fabric |
| Surface Mount | Yes |
| Manufacturer | AMD / Xilinx |
| 生命周期状态 | Not stated in supplied verified data |
XC7Z030-1FB484I 484 balls 引脚配置指南
XC7Z030-1FB484I（484 balls 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： XC7Z030-1FB484I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC7Z030-1FB484I 适用于 6 应用s: Industrial Automation Controller, Machine Vision Image Processing, Communications and Network Equipment, Data Acquisition and Signal Conditioning, Embedded Control and HMI Platform, Programmable Test and Measurement.
Industrial Automation Controller
The XC7Z030-1FB484I fits industrial automation when a controller must combine deterministic programmable logic with a higher-level processor. Its 125K logic cells can host parallel control, timing, or interface functions, while the dual ARM Cortex-A9 MPCore subsystem can execute communications, diagnostics, and supervisory software. The 667 MHz processor figure provides a useful platform reference, but actual control-loop performance depends on the design, memory system, interrupts, and FPGA timing closure. Use the verified AMD package files to confirm ball assignments and supply requirements before schematic capture.
推荐
Machine Vision Image Processing
For machine vision and image-processing systems, the XC7Z030-1FB484I can divide work between hardware pipelines and software. The FPGA fabric is suited to parallel pixel transport, fixed-function filtering, thresholding, and frame timing, while the Cortex-A9 processors can manage configuration, buffering policy, and higher-level decisions. The verified data confirms 125K logic cells and 667 MHz processor frequency, but it does not provide camera-interface, memory-bandwidth, or image-processing resource limits. Those requirements must be validated against the complete AMD device documentation and the selected external memory interface.
推荐
Communications and Network Equipment
XC7Z030-1FB484I is relevant to communication equipment where programmable logic must implement packet handling, data movement, or custom interfaces while the ARM subsystem supports control-plane software. The integrated SoC architecture can reduce inter-chip traffic for tightly coupled software and hardware functions. The verified listing confirms the Zynq-7000 Kintex-7 architecture and dual Cortex-A9 processors, but it does not confirm Ethernet, PCIe, transceiver, protocol, or security features. Engineers must check the exact device datasheet and board-level clocking before treating it as a networking solution.
推荐
Data Acquisition and Signal Conditioning
The XC7Z030-1FB484I can serve as the processing centerpiece of a data-acquisition system when acquisition timing, parallel data paths, and control logic must be coordinated. FPGA logic can implement counters, channel sequencing, filtering front ends, and data packing, while the processor subsystem handles configuration and data management. The verified sources confirm the 125K logic-cell and 667 MHz processor platform but do not specify ADC sample rates, memory interfaces, or I/O timing. Use companion converters only after verifying voltage, interface mode, clocking, and package-level routing requirements.
推荐
Embedded Control and HMI Platform
The XC7Z030-1FB484I supports embedded products that need both a software environment and programmable hardware. The ARM Cortex-A9 MPCore cores can host application logic, communications, and user-interface services, while FPGA fabric can accelerate peripheral control, timing, or custom display and motor-control functions. The verified data identifies an industrial device and a 484-FCBGA package, but does not confirm operating-system support, display interfaces, or safety functions. Product qualification should therefore include processor, memory, boot, security, and peripheral validation using AMD tools and documentation.
推荐
Programmable Test and Measurement
XC7Z030-1FB484I is a candidate for programmable test and measurement systems because it combines a processor subsystem with FPGA-based timing and signal-path logic. The FPGA fabric can implement deterministic stimulus generation, acquisition pipelines, or protocol engines, while the ARM cores manage sequencing, calibration, and data storage. The verified listing confirms 125K logic cells and 667 MHz processor frequency, while detailed clock, I/O, memory, and instrumentation features are not supplied. Confirm exact electrical limits and package pin assignments in the manufacturer documentation before selecting it for precision instrumentation.
推荐
推荐产品汇总
工程参考数据： XC7Z030-1FB484I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC7Z030-1FBG484I | XC7Z030-2FBG484I | XC7Z30-FBG484 |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD / Xilinx |
| Package | 484-FCBGA (23 x 23 mm) | 484-FCBGA (23 x 23 mm) | 484-FCBGA (23 x 23 mm) | 484-FCBGA |
| Programmable Logic | Zynq-7000 Kintex-7 FPGA fabric | Zynq-7000 Kintex-7 FPGA fabric | Zynq-7000 Kintex-7 FPGA fabric | Zynq-7000 package family |
| Pin Count | 484 balls | 484 balls | 484 balls | 484-FCBGA package family |
关键差异点
- Processor and programmable logic integration （对比 XC7Z30-FBG484)
- Known speed-grade identity （对比 XC7Z030-2FBG484I)
- Package format continuity （对比 XC7Z030-1FBG484I)
设计说明
Treat the 484-FCBGA as a fine-pitch BGA design constraint. Confirm ball assignments using the AMD Zynq-7000 package files, then plan fanout, layer transitions, via-in-pad or buried-via structures, solder mask, and assembly capability with the PCB fabricator. A same-package candidate is not a substitute for a verified ball map and footprint review.
Build the power tree from the exact device supply, I/O, and sequencing requirements in the manufacturer documentation. The supplied verified data does not provide voltage rails or current limits, so do not infer them from the 667 MHz processor figure. Validate startup, rail ordering, decoupling, voltage tolerances, and worst-case current before schematic release.
Separate high-speed or sensitive interfaces from noisy power and switching paths, and preserve the required return paths on the PCB. Because the supplied data does not identify specific transceiver or I/O capabilities, determine which pins are high-speed, differential, clock, or configuration-related from the exact package and device documentation before routing.
Do not substitute XC7Z030-2FBG484I solely because it uses the same listed package. Its verified processor frequency is 800 MHz rather than the target's 667 MHz, and speed-grade changes can affect timing, power, qualification, and system behavior. Similarly, do not treat XC7Z030-1FBG484I as drop-in without confirming ordering-code, package-ball, voltage, and lifecycle equivalence.
合规信息
The supplied verified web results do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-mineral status. Industrial temperature classification is stated by the FPGA Market result, but that classification does not establish regulatory compliance.
