XC7Z030-1FB484I - 667MHz Zynq SoC | AMD | Industrial FPGA
N.º da peça: XC7Z030-1FB484I ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $0.01 | $0,01 |
| 10 | $0.01 | $0,10 |
| 100 | $0.01 | $1,00 |
| 500 | $0.01 | $5,00 |
| 1.000 | $0.01 | $10,00 |
XC7Z030-1FB484I Visão geral
A Zynq-7000 SoC FPGA integrates a programmable logic section with one or more ARM Cortex-A9 processors. The processor subsystem executes software, while the FPGA fabric implements parallel datapaths, custom interfaces, protocol engines, and control logic. This combination allows designers to place software-controlled functions and hardware-accelerated operations in one package instead of using a separate processor and FPGA.
The XC7Z030-1FB484I provides 125K logic cells and a 667 MHz processor frequency according to the verified distributor listing. The part is identified as a speed-grade-1, industrial-temperature device by the verified FPGA Market listing. Its 484-FCBGA package provides 484 terminals in a 23 x 23 mm surface-mount format. Exact pin names, electrical limits, I/O standards, memory configuration, and power requirements were not included in the supplied source data and must be confirmed in the manufacturer datasheet.
Typical designs use the programmable fabric for high-throughput parallel processing and the Cortex-A9 subsystem for operating-system support, networking, control loops, or application workloads. The integrated architecture can simplify a board-level partition when software and programmable logic must exchange data frequently. Engineers should still budget for external memory, clocking, power regulation, signal conditioning, and thermal management where the selected design requires them.
The most important layout consideration is package escape routing. A 484-ball BGA device requires a substrate or PCB with compatible ball geometry, via-in-pad or fanout strategy, controlled impedance, and an assembly process capable of handling the package pitch. Verify the exact pinout and I/O assignments against AMD package documentation before schematic capture or PCB release.
This page consolidates verified distributor and cross-reference results, separates confirmed specifications from missing parameters, and provides engineering guidance for evaluating this industrial Zynq SoC FPGA. It does not infer a drop-in replacement unless a manufacturer or distributor explicitly verifies the same package and pin compatibility.
Alternativas drop-in para XC7Z030-1FB484I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC7Z030-1FB484I (mesmo formato e footprint) — diferindo em Logic Cells, Package, Lifecycle Status, Speed Grade.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
XC7Z030-1FBG484I
✅ Drop-In✓ Em estoque
$160 / unidade
Ver ficha técnica →XC7Z030-2FBG484I
✅ Drop-In✓ Em estoque
$58 / unidade
Ver ficha técnica →XC7Z30-FBG484
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC7Z030-1FB484I Classificações máximas e características elétricas
| Product Type | Zynq-7000 Kintex-7 system-on-chip FPGA |
| Programmable Logic | FPGA |
| Logic Cells | 125K logic cells |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| Debug Support | CoreSight |
| Encapsulamento | 484-FCBGA (23 x 23 mm) |
| Package Pin Count | 484 balls |
| Speed Grade | 1 |
| Temperature Grade | Industrial |
| Device Architecture | Zynq-7000 SoC with Kintex-7 FPGA fabric |
| Surface Mount | Yes |
| Manufacturer | AMD / Xilinx |
| Status do ciclo de vida | Not stated in supplied verified data |
Guia de Configuração de Pinos do XC7Z030-1FB484I 484 balls
Configuração de pinos para XC7Z030-1FB484I (pacote 484 balls). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC7Z030-1FB484I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC7Z030-1FB484I é adequado para 6 aplicaçãos: Industrial Automation Controller, Machine Vision Image Processing, Communications and Network Equipment, Data Acquisition and Signal Conditioning, Embedded Control and HMI Platform, Programmable Test and Measurement.
Industrial Automation Controller
The XC7Z030-1FB484I fits industrial automation when a controller must combine deterministic programmable logic with a higher-level processor. Its 125K logic cells can host parallel control, timing, or interface functions, while the dual ARM Cortex-A9 MPCore subsystem can execute communications, diagnostics, and supervisory software. The 667 MHz processor figure provides a useful platform reference, but actual control-loop performance depends on the design, memory system, interrupts, and FPGA timing closure. Use the verified AMD package files to confirm ball assignments and supply requirements before schematic capture.
Recomendado
Machine Vision Image Processing
For machine vision and image-processing systems, the XC7Z030-1FB484I can divide work between hardware pipelines and software. The FPGA fabric is suited to parallel pixel transport, fixed-function filtering, thresholding, and frame timing, while the Cortex-A9 processors can manage configuration, buffering policy, and higher-level decisions. The verified data confirms 125K logic cells and 667 MHz processor frequency, but it does not provide camera-interface, memory-bandwidth, or image-processing resource limits. Those requirements must be validated against the complete AMD device documentation and the selected external memory interface.
Recomendado
Communications and Network Equipment
XC7Z030-1FB484I is relevant to communication equipment where programmable logic must implement packet handling, data movement, or custom interfaces while the ARM subsystem supports control-plane software. The integrated SoC architecture can reduce inter-chip traffic for tightly coupled software and hardware functions. The verified listing confirms the Zynq-7000 Kintex-7 architecture and dual Cortex-A9 processors, but it does not confirm Ethernet, PCIe, transceiver, protocol, or security features. Engineers must check the exact device datasheet and board-level clocking before treating it as a networking solution.
Recomendado
Data Acquisition and Signal Conditioning
The XC7Z030-1FB484I can serve as the processing centerpiece of a data-acquisition system when acquisition timing, parallel data paths, and control logic must be coordinated. FPGA logic can implement counters, channel sequencing, filtering front ends, and data packing, while the processor subsystem handles configuration and data management. The verified sources confirm the 125K logic-cell and 667 MHz processor platform but do not specify ADC sample rates, memory interfaces, or I/O timing. Use companion converters only after verifying voltage, interface mode, clocking, and package-level routing requirements.
Recomendado
Embedded Control and HMI Platform
The XC7Z030-1FB484I supports embedded products that need both a software environment and programmable hardware. The ARM Cortex-A9 MPCore cores can host application logic, communications, and user-interface services, while FPGA fabric can accelerate peripheral control, timing, or custom display and motor-control functions. The verified data identifies an industrial device and a 484-FCBGA package, but does not confirm operating-system support, display interfaces, or safety functions. Product qualification should therefore include processor, memory, boot, security, and peripheral validation using AMD tools and documentation.
Recomendado
Programmable Test and Measurement
XC7Z030-1FB484I is a candidate for programmable test and measurement systems because it combines a processor subsystem with FPGA-based timing and signal-path logic. The FPGA fabric can implement deterministic stimulus generation, acquisition pipelines, or protocol engines, while the ARM cores manage sequencing, calibration, and data storage. The verified listing confirms 125K logic cells and 667 MHz processor frequency, while detailed clock, I/O, memory, and instrumentation features are not supplied. Confirm exact electrical limits and package pin assignments in the manufacturer documentation before selecting it for precision instrumentation.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC7Z030-1FB484I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC7Z030-1FBG484I | XC7Z030-2FBG484I | XC7Z30-FBG484 |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD / Xilinx |
| Package | 484-FCBGA (23 x 23 mm) | 484-FCBGA (23 x 23 mm) | 484-FCBGA (23 x 23 mm) | 484-FCBGA |
| Programmable Logic | Zynq-7000 Kintex-7 FPGA fabric | Zynq-7000 Kintex-7 FPGA fabric | Zynq-7000 Kintex-7 FPGA fabric | Zynq-7000 package family |
| Pin Count | 484 balls | 484 balls | 484 balls | 484-FCBGA package family |
Principais diferenciais
- Processor and programmable logic integration (vs XC7Z30-FBG484)
- Known speed-grade identity (vs XC7Z030-2FBG484I)
- Package format continuity (vs XC7Z030-1FBG484I)
Notas de projeto
Treat the 484-FCBGA as a fine-pitch BGA design constraint. Confirm ball assignments using the AMD Zynq-7000 package files, then plan fanout, layer transitions, via-in-pad or buried-via structures, solder mask, and assembly capability with the PCB fabricator. A same-package candidate is not a substitute for a verified ball map and footprint review.
Build the power tree from the exact device supply, I/O, and sequencing requirements in the manufacturer documentation. The supplied verified data does not provide voltage rails or current limits, so do not infer them from the 667 MHz processor figure. Validate startup, rail ordering, decoupling, voltage tolerances, and worst-case current before schematic release.
Separate high-speed or sensitive interfaces from noisy power and switching paths, and preserve the required return paths on the PCB. Because the supplied data does not identify specific transceiver or I/O capabilities, determine which pins are high-speed, differential, clock, or configuration-related from the exact package and device documentation before routing.
Do not substitute XC7Z030-2FBG484I solely because it uses the same listed package. Its verified processor frequency is 800 MHz rather than the target's 667 MHz, and speed-grade changes can affect timing, power, qualification, and system behavior. Similarly, do not treat XC7Z030-1FBG484I as drop-in without confirming ordering-code, package-ball, voltage, and lifecycle equivalence.
Informações de conformidade
The supplied verified web results do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-mineral status. Industrial temperature classification is stated by the FPGA Market result, but that classification does not establish regulatory compliance.
