EP1810JM-45 vs EP1810GM883 비교
다음의 상세 나란히 비교: EP1810JM-45 제조: Altera 및 EP1810GM883 제조: Altera. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | EP1810JM-45 | EP1810GM883 |
|---|---|---|
| 브랜드 | Altera | Altera |
| 카테고리 | FPGA & CPLD | FPGA & CPLD |
| 수명 주기 상태 | Obsolete | Obsolete |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $14.20 | $175.00 |
| Device Family | Classic EPLD (EP1810 series) | — |
| Macrocells | 48 | 48 |
| Usable Gates | ~900 gates | — |
| Propagation Delay (tpd) | 45 ns (max, -45 speed grade) | 45 ns (max) |
| Supply Voltage (VCC) | 4.5 V to 5.5 V | — |
| Technology | CMOS, UV-EPROM configuration | — |
| Package Type | JLCC-68 (ceramic J-leaded chip carrier) | — |
| Package Code | JM (windowed ceramic, UV-erasable) | — |
| 핀 수 | 68 | — |
| 동작 온도 | -55 C to +125 C (military grade) | -55C to +125C (MIL-STD-883 Class B) |
| I/O Compatibility | CMOS / TTL | — |
| Configuration Method | JEDEC fuse map, EPROM programmer | — |
| Programming Technology | UV-erasable EPROM (non-volatile, instant-on) | — |
| 실장 유형 | Surface Mount (J-lead) | Through-Hole (PGA socket) |
| Logic Type | EPLD / PLD (programmable logic device) | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status - legacy mil-spec part] | [DATA_NEEDED: hermetic ceramic PGA is typically non-RoHS due to lead-bearing solder/finish; not confirmed in source data] |
| MSL 레벨 | [DATA_NEEDED: MSL level] | — |
| Family | — | Classic EPLD (EP1810 series) |
| Device Type | — | UV-Erasable Programmable Logic Device (EPLD) |
| Dedicated Inputs | — | 12 |
| User I/O Pins | — | 48 |
| Total Terminals | — | 68 |
| Global Clocks | — | 4 |
| Supply Voltage (Vcc) | — | 4.5 V to 5.5 V (nominal 5 V) |
| Maximum Toggle Frequency (fmax) | — | [DATA_NEEDED: fmax value not in source data; Classic EPLD family typical 35-80 MHz depending on grade] |
| Process Technology | — | CMOS, UV-erasable |
| 패키지 | — | 68-Pin Ceramic Pin Grid Array (PGA) |
| Screening | — | MIL-STD-883 Class B (suffix '883' denotes MIL processing) |
| Lead-Free | — | [DATA_NEEDED: military 883B screened parts commonly use SnPb finish] |