MM74C949N vs ADC0809CCN 비교

다음의 상세 나란히 비교: MM74C949N 제조: Texas Instruments 및 ADC0809CCN 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Texas Instruments
ADC0809CCN ADC0809CCN - 8-Bit 8-Channel SAR ADC | 10kSPS | 28-DIP

ADC0809CCN - 8-Bit 8-Channel SAR ADC | 10kSPS | 28-DIP

ADC0809CCN ✓ 활성

사양 비교

파라미터 MM74C949N ADC0809CCN
브랜드 Texas Instruments Texas Instruments
카테고리 ADC/DAC ADC/DAC
수명 주기 상태 Obsolete 활성
재고 상태 In Stock In Stock
단가 (USD) $3.65 $3.40
분해능 8 bits 8 bits
Number of Input Channels 8 (single-ended, multiplexed) —
Conversion Architecture Successive Approximation (SAR) —
Conversion Time 116 microseconds (typical) —
공급 전압 5 V (single supply) —
Analog Input Type Single-ended, 8-channel MUX —
Digital Interface 8-bit microprocessor-compatible, tri-state outputs —
패키지 28-PDIP (Plastic DIP, 28-pin) 28-pin PDIP (through-hole)
동작 온도 범위 -40 C to +85 C —
Output Code Binary (unipolar) —
Technology CMOS —
Sample-and-Hold Internal —
Reference Internal (external reference option [DATA_NEEDED: pin details]) —
RoHS 상태 [DATA_NEEDED: RoHS status - legacy part predates RoHS directive; check distributor listings] Compliant (NOPB variant); non-compliant legacy
핀 수 28 —
실장 유형 Through-Hole (DIP) Through-Hole (DIP)
수명 주기 상태 Obsolete / End of Life (per GlobalSpec listing) —
Architecture — Successive Approximation (SAR)
Number of Channels — 8 single-ended
Sample Rate (max) — 10 kSPS
Input Type — Single-Ended, Multiplexed
Supply Voltage (VCC) — 4.5 V to 5.25 V (5 V typical)
공급 전류 — [DATA_NEEDED: typical quiescent current]
Analog Input Voltage Range — 0 V to VCC
Integral Nonlinearity (INL) — ±1 LSB max
Differential Nonlinearity (DNL) — ±1 LSB max (no missing codes)
Conversion Time (typ) — [DATA_NEEDED: at fCLK]
Clock Frequency — 10 kHz to 1.1 MHz
기준 전압 — Internal 256R ladder, VREF+ / VREF- pins
Digital I/O Logic Level — TTL/CMOS compatible
동작 온도 — -40 °C to +85 °C
Output Interface — 8-bit parallel, tri-state latched
Channel Selection — 3-bit address latch (A0/A1/A2)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청