MRF377HR3 vs MRF8S9170NR3 비교
다음의 상세 나란히 비교: MRF377HR3 제조: NXP Semiconductors 및 MRF8S9170NR3 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MRF377HR3 | MRF8S9170NR3 |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | MOSFETs | MOSFETs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $68.50 | $38.50 |
| 트랜지스터 유형 | N-Channel Enhancement-Mode Lateral MOSFET | LDMOS, N-Channel Enhancement-Mode Lateral MOSFET |
| Technology | Lateral RF Power MOSFET (Silicon) | RF Power LDMOS |
| Frequency Range | 470 MHz to 860 MHz | 920 MHz to 960 MHz |
| Drain-Source Voltage (V DSS) | 65 V (max) | — |
| Operating Drain Voltage | 32 V (typical) | — |
| Continuous Output Power (P out) | 45 W (CW, push-pull) | — |
| Power Gain (G ps) | 18.2 dB (typical at 860 MHz) | — |
| Drain Efficiency | [DATA_NEEDED: drain efficiency %] | — |
| Test Current | 2 A | — |
| Configuration | Push-Pull (internally matched) | — |
| 패키지 | NI-860C3 (ceramic flange) | OM-780-2 (ceramic flange) |
| 실장 유형 | Flange / Screw Mount (Surface Mount variant per HR3 suffix) | Surface Mount / Flange Mount (bolt-down thermal pad) |
| 동작 온도 | -40 C to +200 C (junction) | [DATA_NEEDED: Tj max and operating range from datasheet] |
| Storage Temperature | [DATA_NEEDED: storage temperature range] | — |
| Lead-Free / RoHS | Lead Free / RoHS Compliant | Lead Free (per digchip listing) |
| Case Connection | Source | — |
| Maximum Power Dissipation | 648 W (per Partstack listing) | — |
| Manufacturer | — | NXP Semiconductors |
| Output Power (Average, W-CDMA) | — | 50 W |
| Power Gain (Typical) | — | 19.3 dB at 920 MHz, 28 V, 1 A quiescent bias |
| Drain-Source Voltage Rating (Vdss) | — | 70 V |
| Operating Drain Voltage (Test Condition) | — | 28 V |
| Quiescent Bias Current (Idq, Test Condition) | — | 1 A |
| Drain Current (Operating) | — | [DATA_NEEDED: typical operating Id at 50 W Pout] |
| Class of Operation | — | Class AB, Class C (W-CDMA) |
| ESD Protection | — | [DATA_NEEDED: ESD class rating from datasheet] |
| Impedance Characterization | — | Series-equivalent large-signal impedance parameters provided |
| Test Conditions Note | — | 100% PAR tested for guaranteed output power capability |